Engine Parts & Service - Fuel Hose & Fittings

Universal Fuel Line Kit - 3/8" Diameter x 6' LengthThis Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: 3/8" x 6' Low Permeation Hose Universal for any engines and tanks Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors Reliably delivers fuel to your engine *Does not include fittings for the tank end and for the engine end Specifications: ID Diameter (inches): 3/8" Length (Feet): 6' Box Dimensions: 3"H x 8"W x 12"L WT: 0.8 lbs UPC: 022697938060 Quick Guide (pdf)

Read more less

Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (1998 & Newer)This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and hose fitting engine end 8896LP6 Universal for any engines and tanks In-Line Fuel Demand Valve The kit also has a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Specifications: ID Diameter (inches): 3/8" Length (Feet): 6' Box Dimensions: 3"H x 10"W x 14"L WT: 1.25 lbs UPC: 022697938626 Quick Guide (pdf)

Read more less

5/16" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - BlackTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.Features:  Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 5/16" / (mm) 7.92 Outer Diameter: (inch) 0.611 / (mm) 15.5 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 1.75" / (mm) 44.5 Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10 Quick Guide (pdf)

Read more less

5/8" x 50' Boxed Type A2 Fuel & Vent Line Hose - BlackTrident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.Features: Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Fuel Hose for vent and diesel distribution  For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 5/8" / (mm) 15.9 Outer Diameter: (inch) 0.960 / (mm) 24.4 Burst Pressure: (psi) 200 / (mpa) 1.38 Working Pressure: (psi) 50 / (mpa) 0.34 Bend Radius: (inch) 3" / (mm) 76.2 Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72 *The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2 Quick Guide (pdf)

Read more less

3/8" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - BlackTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.Features:  Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.681 / (mm) 17.3 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 2" / (mm) 50.8 Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10 Quick Guide (pdf)

Read more less

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features: Johnson, Evinrude, and OMC fitting Tank or Engine End Material Construction: Acetal *Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)

Read more less

Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" BarbThis Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features:Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuelsSpecifications: Material Construction: Aluminum Male thread, hose barb (inch) Male 3/8" NPT x 3/8" Barb  *Use thread sealant on all threads Quick Guide (pdf)

Read more less

3/8" Hose Mender In-Line Fuel Splice Kit with Stainless Steel ClampsWhether it’s an emergency situation on the water or routine maintenance at the dock, this in-line fuel splice kit provides everything you need to repair 3/8-inch lines. Machined brass fitting paired with 2 stainless steel hose clamps. Features: Everything you need to mend a 3/8-inch fuel line including 2 stainless steel hose clamps Solid machined brass with barbed ends A centered divider ensures you get the mender evenly and securely placed between both ends of the hose Very Versatile: Use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels Quick Guide (pdf)

Read more less

Chrysler Female Hose Fitting - 3/8" BarbThis Attwood Chrysler Engine Fuel Hose Fitting provides for the precise and effective installation of a fuel line to a Chrysler-brand engine. This Fuel Hose Fitting is a female fitting that connects to the engine end of the fuel line. The fitting has a 3/8-inch barb.Features: Provides precise installation of a fuel line to a Chrysler-brand engine Connects on the engine end of the fuel line Material Construction: Chrome-plated Brass *Specifically mates to Attwood part number: 14509-6 Quick Guide (pdf)

Read more less

Honda Tank Fitting - 1/4" NPT Thread - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.Features: Honda male fitting Designed for 90HP+ (Large Bore)  Material Construction: Chrome-plated Brass *Specifically mates to Attwood part number: 8902-6 Quick Guide (pdf)

Read more less

Primer Bulb - 5/16" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features: It is intended for use with a 5/16-inch interior diameter hose Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour) Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified Specifications: ID Diameter (inches): 5/16" Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs UPC: 022697935168 Quick Guide (pdf)

Read more less

Mercury Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features: Solid machined brass for dependable performance, peace of mind Quick-connect ¼-inch male thread makes installation easy Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel 1/4" NPT (National Pipe Thread) Specifically designed for Mercury/Mariner Brand engines and tanks *Specifically mates to Attwood part number: 8890LP6 Quick Guide (pdf)

Read more less