Entertainment - Amplifiers

ME-60 4 Channel Amplifier - 120 WattsThe ME60 is a four channel 120 Watts RMS audio amplifier of delivering up to 30W RMS per channel.  It has a compact, water resistant design that allows for flexible mounting possibilities, and makes it simple to expand the audio system capabilities for any installation.Features: To add additional loudspeakers to a current audio system To provide amplification for a separate audio zone Powers up to eight (8) 4ohm speakers Internal distortion limiting circuits Dedicated gain level control External volume control with ON/OFF switch included Rear channels switchable from full range to powered sub out Specifications: Number of Channels - 4 Speaker Impedance - 2-8 ohm 4 Ohm RMS Power - 4 x 20 W 2 Ohm RMS Power - 4 x 30 W Frequency Response - 20Hz-40kHz Dimensions (W x H x D) - 6.9" x 4.5" x 1.4" (175mm x 115mm x 35mm)  Volume Control Cable Length - 114" (290 cm) *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Bridgeable: Yes Channels - Available: 4 Waterproof Rating: Splashproof Watts: 120w Box Dimensions: 3"H x 7"W x 11"L WT: 2.15 lbs UPC: 731128940793 Owner's Manual (pdf)Brochure (pdf)

Read more less

R1 1000.1 Mono-Block Marine AmplifierRoswell’s R1 1000.1 amp is a mono-block stackable Class-D design that pairs perfectly with our new R1 subs. It also features a calibrated potentiometer. This amp is powerful, like super powerful. It can run (2) R1 12" subwoofers or (4) R1 10" subwoofers. Get bumpin’.Features: Space-saving stackable design The Lit logo power indicator lets you know your amp is receiving power Low-pass and subsonic filters (12 DB/OCT.)     Switchable differential RCA inputs minimize interference and induced noise Bass boost control (0-18DB @ 45HZ)     Conformal-coated PCBs Full 0-180º phase control     Nickel-plated wire terminals High-Efficiency Class-D Topology      Specifications: Continuous Power (RMS): 4Ω: 400W 2Ω: 675W 1Ω: 1000W Frequency Response: 10Hz – 400Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Dimensions: Inches: 1.90 x 7.06 x 11.125 Centimeters: 4.83 x 17.94 x 28.26 Specifications: Channels - Available: 1 Box Dimensions: 4"H x 11"W x 14"L WT: 6.9 lbs UPC: 006066231730

Read more less

R1 900.6 6-Channel Marine AmplifierThe R1 900.6 marine-grade amplifier from Roswell is everything a boat's audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering an R1 8″ and R1 6.5″ marine speaker setup.  This amp features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.Features: Ch 1-6 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 6-channel design Marine-grade durability 2 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 100W x 6 / 2Ω: 165W x 6 Bridged: 4Ω: 300W x 3 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Dimensions: Inches: 1.90 x 7.06 x 13.67 / Centimeters: 4.83 x 17.94 x 34.74 Specifications: Bridgeable: Yes Channels - Available: 6 Box Dimensions: 4"H x 11"W x 17"L WT: 8 lbs UPC: 066066236739

Read more less

R1 650.4 4-Channel Marine AmplifierThe R1 650.4 marine-grade amplifier from Roswell, is everything a boat's audio system has always wanted. These stackable amplifiers utilize a 4-channel Class-D design that puts out 100 watts RMS per channel at 4Ω and is perfect for powering an R1 6.5″ marine speaker setup.Easily bridge and tune with the calibrated crossover controls. Because LEDs create lots of noise issues, this amp features differential RCA inputs for maximum noise rejection. The R1 650.4 is built with fully conformal-coated PCBs and nickel-plated marine-grade wire terminals to ensure their quality.Features: Ch 1-4 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 4-channel design Marine-grade durability 2 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 100W x 4 / 2Ω: 165W x 4  Bridged: 4Ω: 300W x 2 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Dimensions: Inches: 1.90 x 7.06 x 11.125 Centimeters: 4.83 x 17.94 x 28.26 Specifications: Bridgeable: Yes Channels - Available: 4 Box Dimensions: 4"H x 11"W x 14"L WT: 6.5 lbs UPC: 006066234731

Read more less

R1 550.2 2-Channel Marine AmplifierRoswell’s R1 550.2 is the ideal amp to run an R1 tower speaker setup. It’s a 2-channel Class-D design that puts out 165 watts RMS per channel at 4Ω and 275 watts RMS per channel at 2Ω. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.Features: Ch 1-2 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 2-channel design Marine-grade durability 4 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology 2 Ohm Stable at 275 watts per channel     Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 165W x 2 / 2Ω: 275W x 2 Bridged: 4Ω: 550W x 1 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Phase Control: 0-180º Dimensions: Inches: 1.90 x 7.0625 x 11.125 Centimeters: 4.83 x 17.94 x 28.26 Specifications: Bridgeable: Yes Channels - Available: 2 Box Dimensions: 4"H x 11"W x 14"L WT: 6.2 lbs UPC: 066066232731

Read more less

JAHD240BT 2-Channel Bluetooth Amplifier - 80WThe waterproof JAHD240BT is on the forefront of technology with integrated Bluetooth technology allowing users to stream their audio content using a Bluetooth enabled device.  Now, users can take their personal music library with them on all of their adventures. All playback and volume options are controlled by the users Bluetooth enabled device.Features: Waterproof (IPX6) Red LED power indicator Epoxy potted enclosure Corrosion resistant (ASTM B117) Technical Specifications: Number of Channels - 2 Frequency Response - 20Hz - 20KHz 2 Ohm RMS Power Per Channel - 1 x 80W Signal-to-Noise Ratio - >95dB Product Dimensions: (W x H x D) - 4.13" x 2.32" x 1.47"  ∗SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK*Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bridgeable: No Channels - Available: 2 Waterproof Rating: Waterproof Watts: 80w Box Dimensions: 3"H x 5"W x 5"L WT: 1.5 lbs UPC: 681787019579 Owner's Manual (pdf)

Read more less

MS-AM402 2 Channel Marine Amplifier - 400W Features: Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection. Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability. Class-AB Design - The 400 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat. Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life. RCA Line Out - A pass through the RCA output enables linking of multiple amplifiers for enhanced system performance. 2 Channels - Capable of powering 2 speakers, a sub (bridged) or 4 speakers in parallel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bridgeable: Yes Channels - Available: 2 Waterproof Rating: Splashproof Watts: 400w Box Dimensions: 4"H x 11"W x 15"L WT: 6.3 lbs UPC: 753759139247 Owner's Manual (pdf)

Read more less

ME-6005D 5-Channel Amplifier - 600 WattsFeatures: Waterproof IP5 Pigtail wire harness and connection High-efficient full-range class D operation Selectable high-level and low-level input Signal sensing and 12V remote out short thermal and overload protection DIP switchable crossover Gain control for front and rear channel Switchable mode for 4-channel model: 2CH/4CH Specifications: Number of Channels - 5 4 Ohm RMS Power - 50W x 4 + 150 x 1 2 Ohm RMS Power - 75W x4 + 300 x 1 Frequency range: 20Hz-20KHz Dimensions (W x H x D) 11.4" x 4" x 1.75" (290mm x 102mm x  44.5mm) *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Bridgeable: Yes Channels - Available: 5 Waterproof Rating: Splashproof Watts: 600w Box Dimensions: 3"H x 7"W x 16"L WT: 5 lbs UPC: 731128941448 Owner's Manual (pdf)

Read more less

Weatherproof Compact Monoblock Marine Amplifier - 300WPioneer's GM-ME300X1C is a weatherproof, Class-D monoaural marine amplifier that is IP67 rated and SAE J1171 Certified.  This amplifier features 21-step frequency selection and top adjustment access that benefits when installing into narrow compartments.  The microcomputer Protection Control System (PCS), provides thermal protection, controlled current, and voltage protection to ensure stable output operation. The microcomputer also provides a selectable power mode to match the speaker's handling.Features: IP67 rated PCS (Protection Control System) 21-step frequency selection (LPF/HPF) Switching power supply controlled by microcomputer Technical Specifications: Number of Channels - 1 Frequency Response - 20 - 240 Hz 2 Ohm RMS Power Per Channel - 300W x 1 Signal-to-Noise Ratio - 75dB Dimensions (L x W x H) - 11-13/16" x 4-1/8" x 1-5/8" *Sold as an Individual Specifications: Bridgeable: No Channels - Available: 1 Waterproof Rating: Resistant Watts: 300w Box Dimensions: 4"H x 8"W x 13"L WT: 3.75 lbs UPC: 884938463645 Owner's Manual (pdf)

Read more less

MS-AM504 4-Channel Marine Amplifier - 500W Features: Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection. Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability. Class-AB Design - The 500 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat. Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life. RCA Line Out - A pass through RCA output enables linking of multiple amplifiers for enhanced system performance. 4 Channels - Capable of powering 4 speakers, a sub and a pair of speakers or 8 speakers in parallel (2 speakers per channel in parellel @ 2 Ohms). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bridgeable: Yes Channels - Available: 4 Waterproof Rating: Splashproof Watts: 500w Box Dimensions: 4"H x 11"W x 18"L WT: 7.9 lbs UPC: 753759139254 Owner's Manual (pdf)

Read more less

ME70BT IPX6 4-Channel Marine AmplifierFeatures: Remote display keypad 4x45 Audio power out 100 Meter Bluetooth range Phone/Android charging USB music Player AUX input NMEA 2000® certified Multiple EQ preset options Backlit 3 line display with adjustable illumination This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Channels - Available: 4 Watts: 45w x 4 Box Dimensions: 3"H x 7"W x 18"L WT: 4 lbs UPC: 731128941226

Read more less

CPM50 Bluetooth Package - Amplifier & 5" SpeakersCombine the JENSEN JAHD240BT 2-Channel Bluetooth amplifier with a pair of JENSEN MS5006 5" speakers and you have a full, robust stereo system to play any music from your personal music library.  Waterproof and compact, this combination will make installation easy and the sound of music powerful.The JENSEN MS5006 speaker is a pair of 30 watt waterproof 5" speakers with built in tweeter. Features: Bluetooth streaming audio (A2DP) Waterproof (IPX6) 80 Watt amplifier 30 Watt speakers (Pair) ∗SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK*Sold as a kit WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Watts: 80w Waterproof Rating: Waterproof Channels - Available: 2 Bridgeable: No Box Dimensions: 7"H x 7"W x 10"L WT: 3.2 lbs UPC: 681787020070 Brochure (pdf)

Read more less