Entertainment - Subwoofers

SWA6 Amplified Bluetooth Combined Stereo & SubwooferThe SWA6 Stereo and Bluetooth Subwoofer is built as the ultimate companion for any music-loving adventurer. With Bluetooth capabilities supported by Halo Aerial Technology to boost the signal range, you can stream your favorite sounds from just about anywhere. From boats and ATVs to indoor/outdoor spa environments and more, this 288-Watt stereo/subwoofer with an 8" cone for amplified bass can power up to four additional external speakers and has both wired and wireless remote access options for total sound control at the push of a button, even in harsh-condition environments.Features: ABS Plastic Chassis Polypropylene Cone Environment Protection: IPx4 RoHS Specifications: Power: 288W Impedance: 4 ohm & 2 ohm stable Frequency Response: 26 - 125 Hz (Subwoofer), 125-20,000 Hz (Amplifier) Inputs: Bluetooth, 2x RCA with variable 400mv, 2V or 4V input Outputs: 2-channel full-range output Cone Size: 8" Dimensions: 368.3mm x 279.4mm x 144.2mm What's Included? 1x SWA6: Amplified Bluetooth Subwoofer 1x 12-Pin Male Molex Connector (AQ-UNH-2) 1x Bluetooth Antenna Extension

Read more less

8" JMPSW800 Subwoofer - 200WWater resistant amplified subwoofer reproduces and projects low-pitch audio frequencies.  Ported aluminum enclosure withstands the elements and enhances the low frequency output and rich sound quality of your stereo.Features: Slim design Built-in amplification Black anodized all aluminum enclosure Mate-in-lock connectors for easy installation Vertical and horizontal mounting provisions Adjustable gain and crossover Technical Specifications: 200 Watts Nominal Power Max Power - 200W Sensitivity - 79dB Voice coil - 38 mm Power System - 12 Vdc Frequency - 60Hz-200Hz Dimensions (W x H x D) - 13.6" x 10.4" x 2.9" In the Box: Marine subwoofer Wiring harness Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: QTY: Single Mounting Style: Surface Watts Max: 200w Cutout Size: 13.6" x 10.4" Watts RMS: 100w Size: 8" Box Dimensions: 5"H x 13"W x 18"L WT: 10 lbs UPC: 681787020032 Owner's Manual (pdf)

Read more less

SWA6+ Amplified Bluetooth Combined Stereo & SubwooferFrom boats and ATVs to indoor/outdoor marine and spa environments and more, if you’re looking to boost your sound quality, the SWA6+ Combined Bluetooth Stereo and Subwoofer could be the answer. This combined stereo and subwoofer boasts an 8″ cone to amplify your bass for the perfect vibration, as well as a 288-Watt amplifier and built-in crossover capabilities to allow for easy connection of additional speakers without the hassle of hooking up an external amplifier. Built to perform in harsh environments with a handheld remote control included for convenience, the SWA6+ Combined Stereo and Subwoofer is waterproof and UV/salt/fog protected, so the party never has to stop.Features: ABS Plastic Chassis Polypropylene Cone Environment Protection: IPx4 RoHS Specifications: Power: 4x 45W (4 Ohms), 4x 72W (2 Ohms) Impedance: 4 ohm & 2 ohm stable Current Draw: 7A (Max), 6mA (Standby) Inputs: Bluetooth, 1x RCA Stereo Pair Outputs: 1x Stereo Pair RCA (4V) Cone Size: 8" Dimensions: 368.3mm x 279.4mm x 144.2mm What's Included? 1x SWA6: Amplified Bluetooth Subwoofer 1x 12-Pin Male Molex Connector (AQ-UNH-2) 1x Bluetooth Antenna Extension

Read more less

Signature Series 3i 12" CRGBW Sports Subwoofer - White The Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers, and tweeters delivers crystal-clear audio and withstands marine conditions like never before.  With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection.  Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season. With the included CRGBW LED illumination, the vibe on board is complete.  Combining function and style, the Signature Series 3i range is made for life on the water, just like you.Features: Delivers premium sound quality suited for the marine environment  Marinized design with IP65 rating  Designed to optimally work with Fusion stereo systems and amplifiers  Custom DSP profiles with CRGBW illumination for a more ambient listening experience True-Marine™ design from Fusion Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction  Technical Specifications: Peak Power - 1,400 Watts RMS Power - 700 Watts Nominal Impedance - 4 ohms Overall Dimensions (Diameter x Depth) - 14.02" x 10" (356 x 254 mm) Mounting Depth Clearance - 8.15" (207 mm) Sensitivity - 86 dB Weight - 24.1 lbs per speaker (10.93 kg) LED Lighting - Yes, CRGBW  In the Box: One (1) Subwoofer Mounting hardware Two (2) water-resistant cable assemblies with 2-pin connector (5.9" (150mm)) Instruction manual *Sold as an Individual Specifications: Cutout Size: 12.05" Mounting Style: Surface QTY: Single Watts Max: 1400w Watts RMS: 700w Size: 12" Box Dimensions: 13"H x 18"W x 18"L WT: 34.55 lbs UPC: 753759298081 Quick Guide (pdf)Brochure (pdf)

Read more less

R1 10" Subwoofer - White - 250W RMS & 500W Peak PowerThe R1 10" marine subwoofer has a truly versatile design that will outperform in an infinite baffle configuration as well as being suited for sealed and ported enclosures. This sub will handle 250 watts RMS and have excellent low-end extension.For a little extra flash, the R1 10" grill option has built-in RGB LEDs that backlight the cone to create your desired visual atmosphere. All of this is packed into durable marine-grade plastic housings that need just over 5" of mounting depth, giving you ample placement possibilities. The only limit is your imagination. If you’re wondering what to power it with, check out the R1 1000.1 Marine Amplifier.Features: Integrated RGB LEDs backlight the cone to create your desired visual atmosphere   Custom-machined wire terminals allow for rock-solid wire connections Klippel® tested and certified to guarantee acoustic performance     Press fit inserts hide installation hardware, which provides a clean, finished look Klippel® optimizes motor structure for maximum power handling and sound quality  Extreme salt and UV resistance Specifications: Color: White Continuous Power (RMS): 250 Watts Peak Power (RMS): 500 Watts Frequency Response (+ / - 3 dB): 35Hz - 300kHz Impedance Ω: 4Ω Dimensions: Nominal Diameter: 10 in. I 25.4 cm Overall Diameter: 10.85 in. | 27.5 cm Basket Diameter: 9.25 in. | 23.5 cm Mounting Depth: 5.08 in. 12.9 cm Total Depth: 7.02 in. 17.8 cm Specifications: Cutout Size: 9.25" QTY: Single Watts Max: 500w Watts RMS: 250w Size: 10" Box Dimensions: 9"H x 13"W x 13"L WT: 12.35 lbs UPC: 066066218001

Read more less

SWA6 Mini Combined Stereo & SubwooferFeatures: 5” Active Subwoofer with Bluetooth 48Wx4 @ 4 Ohms/72Wx4 @ 2 Ohms 1x 144 Subwoofer Output 2x Full Range Speaker Outputs Built-In Electronic Crossovers Tuned Port Bluetooth “Halo Aerial Technology” Compatible Remotes: RF6/WR6 (Sold Separately)

Read more less

RMA 10" Subwoofer Package - BlackRoswell's RMA 10″ subwoofer package takes out the stress of shopping for the correct amp. Inside This Box: RMA 10” Subwoofer R1 550.2 Marine Amplifier RMA 10" SubwooferThe RMA 10" marine subwoofers have a truly versatile design that will outperform an infinite baffle configuration as well as being suited for sealed and ported enclosures. This sub will handle 250-watt RMS and have an excellent low-end extension. All of this is packed into durable marine-grade plastic housings that need just over 5" of mounting depth, giving users ample placement possibilities. Pairs perfectly with the R1 1000.1 marine amplifier.Features: Custom-machined wire terminals allow for rock-solid wire connections Klippel® tested and certified to guarantee acoustic performance     Klippel® optimizes motor structure for maximum power handling and sound quality  Extreme salt and UV resistance Specifications: Color: Black Continuous Power (RMS): 250 Watts Peak Power (RMS): 500 Watts Sensitivity: 88dB @ 1W/1M Frequency Response (+ / - 3 dB): 35Hz - 300kHz Impedance Ω: 4Ω Dimensions: Nominal Diameter: 10 in. I 25.4 cm Overall Diameter: 10.85 in. | 27.5 cm Basket Diameter: 9.25 in. | 23.5 cm Mounting Depth: 5.08 in. 12.9 cm Total Depth: 7.02 in. 17.8 cm R1 550.2 2-Channel Marine AmplifierRoswell’s R1 550.2 is the ideal amp to run an R1 tower speaker setup. It’s a 2-channel Class-D design that puts out 165 watts RMS per channel at 4Ω and 275 watts RMS per channel at 2Ω. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.Features: Ch 1-2 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 2-channel design Marine-grade durability 4 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology 2 Ohm Stable at 275 watts per channel     Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 165W x 2 / 2Ω: 275W x 2 Bridged: 4Ω: 550W x 1 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Phase Control: 0-180º Dimensions: Inches: 1.90 x 7.0625 x 11.125 Centimeters: 4.83 x 17.94 x 28.26 Specifications: QTY: Single Watts Max: 500w Watts RMS: 250w Size: 10" Box Dimensions: 13"H x 13"W x 14"L WT: 19.35 lbs

Read more less

R1 12" Subwoofer - White - 500W RMS & 1000W Peak PowerThis R1 12" marine subwoofer has a truly versatile design that will outperform an infinite baffle configuration as well as being suited for sealed and ported enclosures. This sub will handle 500-watt RMS and have an excellent low-end extension.For a little extra flash, the R1 12" grill has built-in RGB LEDs, which can be controlled through the Roswell RGB remote and controller, that backlight the cone to create a desired visual atmosphere. Wondering what to power it with? Check out the R1 1000.1 Marine Amplifier.Features: Integrated RGB LED backlight the cone to create your desired visual atmosphere     Dual spider ensures linear excursion Dual 3" voice coils     Custom machined wire terminals allow for rock-solid wire connections  Integrated impedance switch allows you to easily select series or parallel voice coil configurations     Press-fit inserts hide installation hardware which provides a clean finished look  Klippel® tested and certified to guarantee acoustic performance     Extreme salt and UV resistance Klippel® optimizes motor structure for maximum power handling and sound quality Specifications: Color: White Continuous Power (RMS): 500 Watts Peak Power (RMS): 1000 Watts Sensitivity: 88dB @ 1W/1M Frequency Response (+ / - 3 dB): 32Hz – 250 Hz Impedance Ω: 4Ω Dimensions: Nominal Diameter: 12 in. I 30.48 cm Overall Diameter: 12.80 in. | 32.5 cm Basket Diameter: 11.20 in. | 28.5 cm Mounting Depth: 6.38 in. 16.2 cm Total Depth: 8.50 in. 21.6 cm Specifications: Cutout Size: 11.2" QTY: Single Watts Max: 1000w Watts RMS: 500w Size: 12" Box Dimensions: 11"H x 15"W x 15"L WT: 21.8 lbs UPC: 066066218100

Read more less

RMA 10" Subwoofer - Black - 250W RMS & 500W Peak PowerThe RMA 10" marine subwoofers have a truly versatile design that will outperform in an infinite baffle configuration as well as being suited for sealed and ported enclosures. This sub will handle 250-watt RMS and have excellent low-end extension.All of this is packed into durable marine-grade plastic housings that need just over 5" of mounting depth, giving you ample placement possibilities. Pairs perfectly with the R1 1000.1 marine amplifier.Features: Custom-machined wire terminals allow for rock-solid wire connections Klippel® tested and certified to guarantee acoustic performance     Klippel® optimizes motor structure for maximum power handling and sound quality  Extreme salt and UV resistance Specifications: Color: Black Continuous Power (RMS): 250 Watts Peak Power (RMS): 500 Watts Sensitivity: 88dB @ 1W/1M Frequency Response (+ / - 3 dB): 35Hz - 300kHz Impedance Ω: 4Ω Dimensions: Nominal Diameter: 10 in. I 25.4 cm Overall Diameter: 10.85 in. | 27.5 cm Basket Diameter: 9.25 in. | 23.5 cm Mounting Depth: 5.08 in. 12.9 cm Total Depth: 7.02 in. 17.8 cm Specifications: Cutout Size: 9.25" QTY: Single Watts Max: 500w Watts RMS: 250w Size: 10" Box Dimensions: 9"H x 13"W x 13"L WT: 11.85 lbs UPC: 066066018007

Read more less

RMA 12" Subwoofer - Black - 500W RMS & 1000W Peak This RMA 12" marine subwoofer has a truly versatile design that will outperform in an infinite baffle configuration as well as being suited for sealed and ported enclosures. These subs will handle 500 watts RMS and have excellent low-end extension.This is the perfect sub, with a little wiggle room in the wallet for another pair of R1 marine speakers or R1 tower speakers. Wondering what to power it with? Check out the R1 1000.1 Marine Amplifier.Features: Dual spider ensures linear excursion Dual 3" voice coils     Custom machined wire terminals allow for rock-solid wire connections  Integrated impedance switch allows you to easily select series or parallel voice coil configurations     Klippel® tested and certified to guarantee acoustic performance     Extreme salt and UV resistance Klippel® optimizes motor structure for maximum power handling and sound quality Specifications: Color: Black Continuous Power (RMS): 500 Watts Peak Power (RMS): 1000 Watts Sensitivity: 88dB @ 1W/1M Frequency Response (+ / - 3 dB): 32Hz – 250 Hz Impedance Ω: Dual 4Ω Dimensions: Nominal Diameter: 12 in. I 30.48 cm Overall Diameter: 12.80 in. | 32.5 cm Basket Diameter: 11.20 in. | 28.5 cm Mounting Depth: 6.38 in. 16.2 cm Total Depth: 8.50 in. 21.6 cm Specifications: Cutout Size: 11.2" QTY: Single Watts Max: 1000w Watts RMS: 500w Size: 12" Box Dimensions: 11"H x 15"W x 15"L WT: 21.35 lbs UPC: 066066218117

Read more less

10" MRG10W Subwoofer w/RGB Lighting - White - 800WYou will be surprised when you get much more than you expected from Boss Audio MRGB10W subwoofer. With an incredible bass, this single 10" subwoofer with 4 Ohm aluminum voice coil is sure to satisfy all your music needs.  It comes with rubber surround, which gives this sub extremely high excursion, increasing the bass substantially into ultra-low frequency notes. With 800 Watts peak power and 400 Watts RMS this injection molded polypropylene cone is what you have been looking for to enhance the music scene.Features: Weatherproof 10" Woofer with SINGLE 4 ohm Voice Coil Works in 1 CuFt Sealed or 1.9 CuFt Ported enclosure Polypropylene Cone and Rubber Surround  Multi-color RGB illumination Technical Specifications: 400 Watts Nominal Power Max Power - 800W Sensitivity - 87dB Power System - 12 Vdc Frequency - 44Hz-200Hz Mounting diameter - 9.375" Mounting depth - 4.13" In the Box: Subwoofer Wireless RGB Remote Instruction manual  *Sold as a SingleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Flush Watts Max: 800w Cutout Size: 9.375" QTY: Single Watts RMS: 400w Size: 10" Box Dimensions: 8"H x 13"W x 13"L WT: 10 lbs UPC: 791489126120 Brochure (pdf)

Read more less

10" Marine RGB Kappa Series Speakers - Titanium/GunmetalThe standard in marine speakers.Engineered to overcome the limitations of vertical space that's common on boats to deliver premium sound whether seated or standing.  Feature a possible seven RGB colors in the center mount and perimeter for an exclusive appearance unlike anything else on the market.  UV- and water-resistant, they are built for a harsh marine environment.Big bass and cool LED lights - This marine-rated Infinity Kappa 10" marine subwoofer will boost your bass and brighten up your boat.  Made for outdoor use, this rugged sub can handle up to 300 watts RMS and look great doing it. The attractive multi-color RGB LED lighting will add style and functionality to any vessel.Switch-Selectable Impedance - This powerful sub gives you versatility, too, thanks to Infinity's innovative dual-impedance switch that lets you choose a 2- or 4-ohm load impedance option.  The “SSI” system lets you reconfigure your sub at the flip of a switch – something you can't do with ordinary marine subwoofers – so it always fit in your system as it evolves.Pick a color - When you buy Infinity Kappa speakers, great sound is a given.  But this subwoofer also give you attractive RGB LED lighting that'll add style to your boat. Seven cool colors are available out of the boxFeatures: 10" Marine RGB Passive Subwoofer Choose 2- or 4-ohm impedance with the flip of a switch Polypropylene cone with rubber surround One-piece cast polymer basket IPX5 rated for water resistance In the Box -One marine subwoofer with fixed white polymer grille 6" LED Harness Six 1-3/8" Stainless-steel screws (3mm Allen head) 6 Stainless-steel speed clips 3mm Allen wrench Adhesive backed foam gasket Installation manual *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Watts RMS: 300w Cutout Size: 9.25" Watts Max: 900w Mounting Style: Surface QTY: Single Size: 10" Box Dimensions: 8"H x 15"W x 15"L WT: 10.65 lbs UPC: 050667373115 Owner's Manual (pdf)

Read more less