Entertainment

Elite 500W Mono-Block Class D AmplifierBoss Audio Systems MPD500.1 Elite Series Monoblock Class D Car Amplifier - 500 High Output, 1 Ohm, Low-Level Inputs, Low Pass Crossover, MOSFET, Full Range, Hook Up To Subwoofer For Bass.Features: Monoblock Full-Range, Class D PWM MOSFET Power Supply RCA Level Inputs Low Pass Filter Subsonic Filter Bass Boost Input Sensitivity LED Illuminated End Panels Remote Subwoofer Control IP66-Rated (Dustproof/Weatherproof) Thermal, Short, and Overload Protection Circuits Specifications:Dimension Features: Overall: 7.8"x 5.12" x 1.97" (198 x 130 x 50 mm) Brochure (pdf)

Read more less

Elite 740W 5 Channel Class D AmplifierBoss Audio Systems MPD740.5 Elite Series 5 Channel Class D Car Amplifier – 740 High Output, 2 Ohm Stereo Stable, Low-Level Inputs, High/Low Pass Crossover, MOSFET, Full Range, Bridgeable, Hook Up To Subwoofer For Bass.Features: 5/4/3/2 Channel Full-Range, Class D PWM MOSFET Power Supply RCA Level Inputs HP and LP Filters Bass Boost Input Sensitivity Bridgeable LED Illuminated End Panels Remote Subwoofer Control IP66-Rated (Dustproof/Weatherproof) Thermal, Short, and Overload Protection Circuits Specifications:Dimension Features: Overall: 15.3"x 5.12" x 1.97" (388 x 130 x 50 mm) Brochure (pdf)

Read more less

RCA Cable Splitter - 1 Female to 2 Male - 1'This RCA connector cables is designed to connect your Fusion stereo to your Fusion amplifier. Features: Superior Noise Rejection - The directional, shielded twisted pair cable provides superior noise rejection, resulting in a cleaner, clearer, enhanced audio signal. Nickel-Plated Connectors - Designed to prevent corrosion, these gold-plated connectors will last season after season. Color-Coded Connectors - Avoid unnecessary installation issues with easily identifiable colored bands on the left and right connectors. Technical Specifications: Type - 1 Female to 2 Male Length - 1' or .3 M Connector - Nickel-plated RCA *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cables Box Dimensions: 2"H x 5"W x 6"L WT: 0.15 lbs UPC: 753759223779

Read more less

MS-CBUUSB3.5 Panel Mount USB & 3.5mm Headphone JackThe Fusion MS-CBUSB3.5 panel mount auxiliary connector features a two meter (6.5 foot) USB and 3.5mm auxiliary extension cable. Perfect for limited space in areas such as the helm and fly-bridge where a dock or stereo installation isn't always practical. Designed to connect any Apple, Android, Windows or USB flash device to the USB connector, while any traditional MP3 or standard media player is connected to the 3.5mm auxiliary socket. Ideally suited for the MS-BB300 and MS-RA205 Fusion marine entertainment systems.Features: The MS-CBUSB3.5 includes a rubber seal cap to protect the connectors against the harsh marine environment when not in use Ideally suited for the MS-AV650, MS-AV750, MS-UD650, MS-UD750, MS-BB100, MS-RA70, MS-RA70N, MS-BB300 and MS-RA205 Marine Entertainment SystemsNote: Refer to the connected stereos supported device list before connecting a smartphone or media player. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Elite 380W 4 Channel Class D AmplifierBoss Audio Systems MPD380.4 4 Channel Marine Amplifier - Class D, 380 High Output, IP66 Rated, 2 Ohm Stable, Low-Level Inputs, High/Low Pass Crossover.Features: 4/3/2 Channel Full-Range, Class D PWM MOSFET Power Supply RCA Level Inputs HP & LP Filters Bass Boost Input Sensitivity Bridgeable LED Illuminated End Panels IP66-Rated (Dustproof/Weatherproof) Thermal, Short, and Overload Protection Circuits Specifications:Dimensions Features: Overall: 9.76"x 5.12" x 1.97" (248 x 130 x 50 mm) Brochure (pdf)

Read more less

SeaWatch® 15" Marine TV Antenna - 12VDC - 110VACThe SeaWatch® series of TV antennas are omni-directional over-the-air digital HDTV solutions that bring sleek lines and 360 degrees high-performance coverage to your watercraft. Designed to accept common 1in-14 threaded mounts, the antennas are well suited to fit virtually any application. Everything needed to connect the antenna to your converter or television is in the box. When paired with an optional 2-way band separator between the antenna and the amplifier, these antennas can also receive AM/FM radio signals. A full line of mounts and extension masts are available to fine-tune the installation.The 3015 antenna is designed for the mobile lifestyle and can be used on marine vessels, RVs, pop-up campers and more! Watch your favorite sports, sitcoms, reality TV, crime dramas, local news, weather, kids programming and more for FREE and in 1080 HD!Features: Low noise amplifier Omni-directional Recieves ALL local HD broadcast signals AC, DC and USB power adapter Best suited for areas up to 40 Miles from Broadcast Towers Specifications: Frequency Range: VHF:47-230MHz;UHF: 470-862MHz Receiving Range: FM/VHF/UHF Gain: 30dB Noise Figure: 3db Max. output lever: 110dBuV Impedance: 75ohms Connector: F-connectors Power Supply: DC 12V, AC 110v Dimensions: 15" x 3" Package Includes: 3015 Panel TV Antenna 20' RG-59 Coax Cable/F-Connectors USB/AC/DC Power Cords Specifications: Length (Inches): 15" Color: White Antenna Band: TV Box Dimensions: 6"H x 16"W x 16"L WT: 5.4 lbs UPC: 719441140533 Brochure (pdf)

Read more less

Subwoofer Flying Lead with Water-Resistant Two-Way ConnectorUse this 5.9-inch (150 mm) water-resistant connector to connect your compatible marine subwoofer to a compatible marine stereo or amplifier.

Read more less

MIM-2 Interface for Dish Wally ReceiversThis multiswitch module for Dish Wally receivers enables automatic satellite switching and is compatible with all new t-Series, s-Series, i-Series, and t-Series satellite TV systems when used with Dish Network (USA) Wally receivers.Features: White-colored unit with four receiver connector ports Installation and configuration are very easy and simple Can be daisy-chained to support both new and legacy receivers Intellian's MIM-2 allows you to select which receiver connected to the MIM will be the "master" receiver The "master" receiver will control which satellite the antenna is focused on Simply choose your desired channels by using the receiver's remote control through the master receiver *Dedicated to the DISH Wally receiver and is not backwards compatible with the DISH VIP211 and VIP711 Specifications: Type: Switches Box Dimensions: 5"H x 11"W x 13"L WT: 4 lbs UPC: 886310034344

Read more less

Clear 18/2 AWG Two Conductor Speaker Wire - 100'18 AWG Speaker wire is commonly used in home theaters, digital audio, and stereo speakers. 18 AWG Speaker wire is not built for nor rated for in-wall usage. How is it built? Well, speaker wire is built from finely stranded tinned copper conductors. The conductors are then covered with translucent PVC insulation. To help identify polarity, Pacer added a positive (+) symbol to one of the conductors. This insulation is made to be flexible which makes installation easy.How do you use 18 AWG speaker wire? They start by selecting the correct gauge. The gauge can be determined by determining how long the wire needs to be. It's a good idea always to add a few extra feet. This leaves room for error and keeps the run from becoming too tight. After you know the length of the wire, you need to consider the power requirements of your application. Once you know the length of your run and the power requirements, you can choose the correct gauge wire for your job. If you would like help selecting the proper speaker wire, contact a Pacer expert today.Features:Highly flexible clear insulationCompliances:RoHS Compliant Directive 2002/95/ECCharacteristics: Conductor: Fully annealed finely stranded tinned copper per ASTM B-174 Insulation: Clear PVC Temperature Range: -20 °C to 105 °C Voltage Rating: 90V Applications:Digital Audio, Stereo Speakers, and Home TheatersSpecifications: AWG: 18/2 Length: 100 ft. Conductor Stranding: 16/0.0100 Nom. O.D.: 0.100 x 0.187 Approx LB/M: 17 *Not Rated for In-Wall Use Specifications: Color: Clear Gauge: 18/2 AWG Length (Feet): 100' Box Dimensions: 3"H x 7"W x 7"L WT: 2.8 lbs

Read more less

18/2 AWG Two Conductor Speaker Wire - Clear - 250'18 AWG Speaker wire is commonly used in home theaters, digital audio, and stereo speakers. 18 AWG Speaker wire is not built for nor rated for in-wall usage. How is it built? Well, speaker wire is built from finely stranded tinned copper conductors. The conductors are then covered with translucent PVC insulation. To help identify polarity, Pacer added a positive (+) symbol to one of the conductors. This insulation is made to be flexible which makes installation easy.How do you use 18 AWG speaker wire? They start by selecting the correct gauge. The gauge can be determined by determining how long the wire needs to be. It's a good idea always to add a few extra feet. This leaves room for error and keeps the run from becoming too tight. After you know the length of the wire, you need to consider the power requirements of your application. Once you know the length of your run and the power requirements, you can choose the correct gauge wire for your job. If you would like help selecting the proper speaker wire, contact a Pacer expert today.Features:Highly flexible clear insulationCompliances:RoHS Compliant Directive 2002/95/ECCharacteristics: Conductor: Fully annealed finely stranded tinned copper per ASTM B-174 Insulation: Clear PVC Temperature Range: -20 °C to 105 °C Voltage Rating: 90V Applications:Digital Audio, Stereo Speakers, and Home TheatersSpecifications: AWG: 18/2 Length: 250 ft. Conductor Stranding: 16/0.0100 Nom. O.D.: 0.100 x 0.187 Approx LB/M: 17 *Not Rated for In-Wall Use Specifications: Color: Clear Gauge: 18/2 AWG Length (Feet): 250' Box Dimensions: 5"H x 7"W x 7"L WT: 6.5 lbs

Read more less

Clear 16/2 AWG Two Conductor Speaker Wire - 250'Speaker wire is often used with home theaters, digital audio as well as stereo speakers. The speaker wire is not rated for in-wall usage. So, how is it manufactured? Speaker wire is made from finely stranded tinned copper conductors that carry translucent PVC insulation. To make identifying the polarity easy, we added a positive symbol (+) to one of the conductor's insulation. This insulation is designed to be flexible which makes installation easy.How do you use speaker wire? Well, you start by choosing the proper gauge. This can be determined by determining how long the wire will need to be. It's always a good idea to always add a few extra feet to leave room for error. This also keeps the run from becoming too tight. Once you know the length of the wire, you will need to consider the power requirements for your application. After you know the length of your run and the power requirements, you can select the proper gauge wire for your job. If you would like help selecting the proper speaker wire, contact a Pacer expert today.Features:Highly flexible clear insulationCompliances:RoHS Compliant Directive 2002/95/ECCharacteristics: Conductor: Fully annealed finely stranded tinned copper per ASTM B-174 Insulation: Clear PVC Temperature Range: -20 °C to 105 °C Voltage Rating: 90V Applications:Digital Audio, Stereo Speakers, and Home TheatersSpecifications: AWG: 16/2 Length: 250 ft. Conductor Stranding: 26/0.0100 Nom. O.D.: 0.112 x 0.210 Approx LB/M: 25 *Not Rated for In-Wall Use Specifications: Color: Clear Gauge: 16/2 AWG Length (Feet): 250' Box Dimensions: 5"H x 7"W x 7"L WT: 6.1 lbs UPC: 840248229449

Read more less

TV-Hub A for Circular TV Series SystemsKVH's TV-Hub A specifically for Circular TV Series Systems.

Read more less