Hunting & Fishing - Outrigger Accessories

Sidewinder Bolt-On Outrigger MountBelow top operation. Fully locked in Running and 80 degree out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just pull down the Ridged Collar and lower or raise the pole. No ball bearing to rust. Internal Delrin Bushings and Nylon Bearing Surfaces provide smooth operation and prevent metal to metal contact.

Read more less

Series 20 Ball Bearing Orbit Block - Single - Dyneema Lashing - Becket OptionThe incredible Series 20 Orbit Block™ is capable of loads up to 250kg (550lb) while weighing a mere 9 grams. It's so light that it needs to be lashed down!Features: Integrated stainless steel hub to accept lashing attachment and through-sheave becket Suits up to 4mm(5/32") lashing Includes 750mm (30") x 1.7mm(1/16") diam lashing Applications:Control lines on dinghies and catamarans to 5M(16')Materials: Sheave: High compression strength carbon acetal Ball bearings: stainless steel Frame/Cheeks: Nylon Brochure (pdf)

Read more less

Elite Rigging Kit - Black NylonTop Quality KitFeatures: 100' of Black Nylon Braid Pair of EZ release clips Pair of 1-3/4" cork stops Pair of single swivel snubbers Pair of eye straps with screws 4 leader snaps

Read more less

Outrigger Holder Reducer - 1-1/2" to 1-1/8" - PairDownsize your outrigger holdersReduce from 1-1/2" to 1-1/8"

Read more less

XD Crank Top MountFeatures: For use on sport fishing boats up to 50 feet Adjustable Upper Arm with ‘Run’ & ‘Laydown’ position Stops User-friendly Folding Crank Handle with Integrated Drive Brake Upper-Arm adjusting Ball-bearing drive system, with Integrated Balance Spring-assist Extreme Duty Top Plate, Upper Arm, and Housings for Outriggers up to 22ft in length Stainless-Steel & Bronze bushed Head pivot for Maximum trolling strength & durability Unique invertible Tigress handle design for use on both soft and hard tops over 2” thick Accepts all Tigress XD 1-1/2” butt diameter outriggers and XD 1-1/8” butts using an adapter Fits Tigress and other industry-standard 4” x 6” mounting plates (four 5/16” diameter fasteners) Extreme-duty 316L Stainless Steel and anodized aluminum and sealed construction with UV protection 24 adjustable/locking system positions featuring Tigress XD 316L Stainless Steel design Ergonomic 316 Stainless Steel mirror-polished lever design with inverting ability for extra hand clearance on the thickest tops User-friendly underside lever actuation, with 8 optional indexable set-up positions Fits through all standard 3” diameter mounting plates and hardtop holes Sold as pair 3-Year Limited Warranty

Read more less

Replacement Tube f/Outrigger Holders - 1-1/8" I.D Cut BaseOur premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy.

Read more less

316 Stainless Steel Snap Hooks - PairThe Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman.Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging accessory for you. All accessories feature top quality materials and are ready to be installed.

Read more less

Deluxe Rigging Kit - Black NylonFor single rigged riggers up to 20'Features: 100' of Black Nylon Braid Pair of high impact release clips Pair of 1-1/4" cork stops Pair of glass ring snubbers Pair of eye straps with screws 4 leader snaps

Read more less

Pro Series Single Rigging KitFeatures: Mesh Bag 50yd spool LP 400lb Blue Outrigger Mono 2 1 ¼” black stops, 2 release clips 2 Tigress Single Locking Halyards Crimps and Snap Lock Swivels

Read more less

16" Ultimate SnubberWith Nickel Plated Snap & Double Stainless Swivel

Read more less

XD Bay Series Top MountFeatures: For use on sport fishing boats up to 40 feet Accepts all Tigress XD 1-1/8” butt diameter Outriggers 19 upper-arm angle/locking (@10 deg.) using Tigress XD 316L Stainless Steel tooth locking design with horizontal stops for Trailering and bridges Large 3-lobe UV ergonomic knob for changing and locking the outriggers’ elevation 24 adjustable/locking system positions (15-degree increments) featuring Tigress XD 316L Stainless Steel locking design with HD Spring return User-friendly Side Operating Lever Large ‘XD’ Aluminum 14.5mm thick baseplate with four corner mounting 5/16” through x 3.000” x 5.000” 4-bolt pattern Fits Tigress and other industry-standard 4” x 6” mounting plates (four 5/16” diameter fasteners) Extreme-duty 316L Stainless Steel and anodized aluminum and fully sealed construction with UV protection Ambidextrous mounting option to accommodate the side that the tri-lobe knob is positioned on 3-Year Limited Warranty

Read more less

Pro Series Double Rigging KitFeatures: Mesh Bag 100yd spool LP 400lb Blue Outrigger Mono 4 1 ¼” black stops 4 release clips 2 Tigress Double Locking Halyards 2 SS Teaser Rings, Crimps, Snap Lock Swivels

Read more less