Hunting & Fishing - Rod Holders

Triple Rod Holder - 30° Bent ButtMuch like our double rod holder, the fisherman now has three options from one holder. It has a solid weld construction, bent butt and is made from high quality aluminum. Like the old saying goes, "the third line's the charm"!

Read more less

Swivel Base Rod HoldersRH575Standard Angle 30°Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 3.1 lbs UPC: 096811517509

Read more less

Plastic 30° Rod & Cup Holder - Drain - Round Top - WhiteFeatures: ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Color: White

Read more less

Stainless Steel 30° Rod & Cup Holder - Open - Oval TopFeatures 316 Stainless with Oval Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.35 lbs UPC: 857515002032 Quick Guide (pdf)

Read more less

Stainless Steel 30° Rod & Cup Holder - Drain - Round TopFeatures 316 Stainless with Round Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002018

Read more less

Swivel Base Rod HoldersRH5169Half Angle 15° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 14"L WT: 2.4 lbs UPC: 096811516533

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-529HS/XS Medium 15°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 15"L WT: 1.85 lbs UPC: 096811512917

Read more less

Plastic 0° Rod & Cup Holder - Drain - Round Top - WhiteFeatures ABS Plastic with Round Top 0º Rod Angle Drain at Bottom Specifications: Angle: 0 Degrees Construction: Plastic Finish: White Mounting Style: Gunwale Box Dimensions: 5"H x 5"W x 10"L WT: 0.5 lbs UPC: 857515002209 Quick Guide (pdf)

Read more less

Plastic 0° Rod & Cup Holder - Drain - Round Top - BlackFeatures ABS Plastic with Round Top 0º Rod Angle Drain at Bottom Specifications: Angle: 0 Degrees Construction: Plastic Finish: Black Mounting Style: Gunwale Box Dimensions: 4"H x 5"W x 10"L WT: 0.5 lbs UPC: 857515002193 Quick Guide (pdf)

Read more less

Bolt On Transom Mount Rod HolderFeatures: Polished aluminum 4 hole 3" x 4-1/2" brushed pad 10" flared rod holder WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. PipeColor:BlackPipe Size:#1Fits:1.050" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 13"L WT: 1.75 lbs UPC: 096811520134

Read more less

700A Series Rod HolderThis rod holder is constructed of anodized aluminum and stainless steel for use in all freshwater and saltwater environments. More specifically, this rod holder is suitable for most walleye and panfish rods. An excellent choice for light trolling or still fishing.Features: Panther Rod Holders are designed and manufactured by CMP Group, the world’s leading producer of state-of-the-art boating and fishing equipment Posi-LOCK technology – 25 and 45-degree angles For optimum fishing performance, Panther gives you a full 360-degree hemisphere of possible positions The mounting base on all Panther models can be easily removed from the unit with an Allen Wrench for storage Panther Rod Holders are precision-made out of rust-resistant stainless steel and aluminum for freshwater and saltwater fishing 7 3/4 in. depth fits most standard rod sizes Mounting hardware is included Specifications: Base Plate (inch): 2-3/4" Tube Diameter (inch): 1-3/4" Tube Depth (inch): 7-3/4" Specifications: Diameter (Inches): 1-3/4" Box Dimensions: 1"H x 7"W x 18"L WT: 1.5 lbs UPC: 628309279790 Quick Guide (pdf)

Read more less