Hunting & Fishing - Rod Holders

RH5167VVertical 0° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811516526

Read more less

Cannon Rod HolderThe Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Triple Threat Three Pole Rod Holder - WhiteThe Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and plier storage with holders that can accommodate up to 16 different fishing lures. Constructed of one-piece injection molded, UV stabilized, polypropylene construction. No assembly is required. This is a fisherman’s dream and is a must-have for any boat, kayak, or dock!Features: Accessory Track Mounting System™ Scent bottle storage Four leashes and two bungee cord attachment points Built-in knife and plier holder Can accommodate up to 16 different fishing lures Accommodates rods up to 1-3/4 inch in diameter Installs with four #8 fasteners (included in the display-packed product) Specifications: Color: White Length (inch): 13-1/2” Height (inch): 10-3/4” Distance Between Screw Holes Horizontally (inch): 7” Distance Between Screw Holes Vertically (inch): 4-1/2” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Finish: White Length (Inches): 13-1/2" Box Dimensions: 3"H x 11"W x 14"L WT: 0.9 lbs UPC: 035514329910 Brochure (pdf)

Read more less

Economy Stainless Steel Gunnel Mount Rod Holder- 15°Features: 316 Stainless Steel Black Liner 9” w/ Oval Cast Flange Top Pin Base Specifications: Angle: 15 Degrees Box Dimensions: 4"H x 4"W x 10"L WT: 1.5 lbs UPC: 661033772717

Read more less

4 Hole Swivel Rectangular Head Rod Holder - 0° - 10-1/2" Head Size: 4.25" x 4.75" Angle: 0° Head Length: 10-1/2" Inner Diameter: 1-7/8" Specifications: Angle: 0 Degrees Length (Inches): 10-1/2" Box Dimensions: 4"H x 6"W x 14"L WT: 2.6 lbs UPC: 661033852228

Read more less

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.900 O.D. PipeColor:BlackPipe Size:#4Fits:1.900" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.85 lbs UPC: 096811500433 Quick Guide (pdf)

Read more less

Weld On Aluminum Flared Rod Holder without Blade Mill Finished 10" Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Oval Head Closed Base Rod Holder - 30° - 9"Heavy duty oval head closed end base, with drain hole to accept 1/4"NPT pipe to hose fitting Head Size: 3.28" x 4.06" Length: 9" Angle: 30° Head Inner Diameter: 1-5/8" Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Length (Inches): 9" Box Dimensions: 4"H x 4"W x 11"L WT: 1.8 lbs UPC: 661033885356

Read more less

Oval Head Closed Base Rod Holder - 0° - 9"Heavy duty oval head closed end base, with drain hole to accept 1/4"NPT pipe to hose fitting Head Size: 3.28" x 4.06" Length: 9" Angle: 0° Head Inner Diameter: 1-5/8" Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Length (Inches): 9" Box Dimensions: 4"H x 4"W x 11"L WT: 1.9 lbs UPC: 661033885370

Read more less

Oval Head SS Gunnel Mount Rod Holder - 30° - 9"Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 30° Head Inner Diameter: 1-5/8" Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Length (Inches): 9" Box Dimensions: 4"H x 6"W x 14"L WT: 2 lbs UPC: 661033885257

Read more less

Oval Head SS Gunnel Mount Rod Holder - 15° - 9"Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 15° Head Inner Diameter: 1-5/8" Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Length (Inches): 9" Box Dimensions: 5"H x 6"W x 13"L WT: 2 lbs UPC: 661033885295

Read more less

Oval Head SS Gunnel Mount Rod Holder - 0° - 9"Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 0° Head Inner Diameter: 1-5/8" Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Length (Inches): 9" Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 661033885271

Read more less