Hunting & Fishing

Flush Mount Rod HolderRH-529HS Medium 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 14"L WT: 1.9 lbs UPC: 096811512900

Read more less

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 30WConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. Specifications: Construction: Anodized Aluminum Finish: Gold Mounting Style: Surface Box Dimensions: 1"H x 4"W x 8"L WT: 0.3 lbs UPC: 096811075658

Read more less

Protector Series Four-Pistol Case Holds up to 8 reels High-density pluck foam Padlock tabs Molded-in carry handle Dimensions: L 16.75" x W 14.5" x H 6" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rod Holder - Medium - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9 " Mounting Style: Surface Box Dimensions: 1"H x 6"W x 15"L WT: 1.75 lbs UPC: 096811530027

Read more less

Swivel Base Rod HoldersRH575Standard Angle 30°Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 3.1 lbs UPC: 096811517509

Read more less

Swivel Base Rod HoldersRH570Stainless Steel Side Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Bulkhead Box Dimensions: 5"H x 6"W x 13"L WT: 3.3 lbs UPC: 096811517004

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):1-1/16" & 1-5/16" O.D. (Pipe), 1-1/4" O.D. (Tube)Location:T-Top Ring, Leaning Posts, Poling PlatformsRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 3.2 lbs UPC: 630838028534

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):7/8" & 1" O.D. (Tube)Location:Bow RailsRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 2.95 lbs UPC: 630838022136

Read more less

800A Series Rod HolderThis rod holder is constructed of anodized aluminum and stainless steel for use in all freshwater and saltwater environments. This is Panther's most popular rod holder. It will accept most heavy-duty trolling rods and is the choice of serious anglers and charter captains throughout the Great Lakes as well as the Pacific Northwest.Features: Panther Rod Holders are designed and manufactured by CMP Group, the world’s leading producer of state-of-the-art boating and fishing equipment Posi-LOCK technology – 25 and 45-degree angles For optimum fishing performance, Panther gives you a full 360-degree hemisphere of possible positions The mounting base on all Panther models can be easily removed from the unit with an Allen Wrench for storage Panther Rod Holders are precision-made out of rust-resistant stainless steel and aluminum for freshwater and saltwater fishing 10 in. depth for larger fishing rods Mounting hardware is included Specifications: Base Plate (inch): 2-3/4" Tube Diameter (inch): 1-3/4" Tube Depth (inch): 10" Specifications: Diameter (Inches): 1-3/4" Box Dimensions: 3"H x 7"W x 20"L WT: 1.7 lbs UPC: 836125098000 Quick Guide (pdf)

Read more less

Premium Outrigger Release Clips (Pair)The Premium Outrigger Release Clip is constructed from premium stainless-steel and PVC. It features a stainless-steel adjustment spring for heavy duty fishing applications and superior corrosion resistance. Features: Stainless-steel and PVC construction Stainless-steel adjustment spring Light to heavy duty Sold in pairs 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

X-Rap® Saltwater 5-1/2" - BunkerSuspending X-Rap® saltwater lures are designed to be cast or trolled and display the X-Rap attitude these baits are known for. Built to withstand saltwater fisheries with Perma Steel 3X hooks, these baits can be cast or trolled. Rip 'em for extreme, erratic Slashbait® action or troll for classic Rapala® "wounded-minnow" action. Prominent scales and lateral lines, internal holographic foil for optimum flash, an internal long-cast system, and 3D holographic eyes combine to create the ultimate fishing lure. Hand-tuned and tank-tested for premium performance right out of the box.Features: X-Rap® Slashbait® action Textured translucent body Internal long-cast mechanism 3D holographic eye VMC® Perma Steel® hooks Perfect match saltwater patterns Hand-tuned and tank-tested Specifications: Color: Bunker Body Length: 5-1/2 in. Running Depth: 4-8 ft. Weight: 1-1/2 oz Buoyancy: Suspending Treble Hook Size: Two No. 2/0 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Series: X-Rap Saltwater Size: 5-1/2" Box Dimensions: 1"H x 2"W x 7"L WT: 0.2 lbs UPC: 022677135618

Read more less

Sarda™ 22 - Pink DoradoBuilt from stainless steel, one-piece construction with a reinforced body and internal rib design for strength, Sarda™ doesn’t fear the meanest predators in the sea. Sarda™ can be trolled up to 14 knots, allowing it to cover more water and catch more fish. Loaded with two forged VMC 7286 TechSet® hooks with split rings and welded rings to reduce the fish's leverage.Features: Stainless Steel One-Piece Construction Reinforced Body Internal Rib Design Fast Stable Action Up To 14 Knots Multi-Species Saltwater VMC® TechSet Hooks Split & Welded Rings Specifications: Color: Pink Dorado (PKD) Body Length: 7" Running Depth: Variable Weight: 7 oz WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Series: Sarda Size: 7" Box Dimensions: 1"H x 4"W x 10"L WT: 0.7 lbs UPC: 022677375298 Brochure (pdf)

Read more less