Hunting & Fishing

Backing Plate for 80 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80 series rod holders. Each size fits all 3 models of the Series.Features: Use this backing plate on all 80 series rod holders (53680CA, 53680SA, 53681CA, 53681SA, 53682CA, and 53682SA) 316L cast stainless steel 4-1/4" x 6" 4mm thick Use your 1/4" stainless bolts and nuts (hardware not included)

Read more less

536810S - Flush Mount Rod Holder - 15 Degree - Swivel - 10.5" DeepThe larger 80 series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Swivel Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2.5 Finish: Silver Length (Inches): 10.5 Mounting Style: Surface Box Dimensions: 5"H x 6"W x 16"L WT: 3.25 lbs

Read more less

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.660" O.D. PipeColor:BlackPipe Size:#3Fits:1.660" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 10"W x 13"L WT: 1.6 lbs UPC: 096811520332

Read more less

Swivel Base Flush Mount Rod HolderMedium, 15 Degree, Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2 lbs UPC: 096811530737

Read more less

RH5930Stainless Steel Backing Plate for 0°, 15° & 30° Heavy Rod Holders.

Read more less

Swivel Base Rod HoldersRH5169Half Angle 15° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 14"L WT: 2.4 lbs UPC: 096811516533

Read more less

Tackle Caddy Track MountIf you’re looking for a tackle storage solution that’s just as versatile and durable as you are, the Tackle Caddy Track Mount is exactly what you’ve been waiting for! This handy device attaches tool-free to most gunnel tracks, so you can customize its placement depending on your space and needs. There’s no need to bring extra tools or cases with you out on the water—just attach them, then store all of your lures, tackle boxes, pliers, and cell phones with ease. Thanks to the removable TracMount hardware which comes included, you can put the Tackle Caddy where it counts when fishing and quickly stow it away when not in use. So don’t worry about running out of mounting options; relax knowing that your essentials stay close by but out of sight!Get ready to head out on the lake with everything you need in one place! Our Tackle Caddy Track Mount attaches tool-free to most gunnel tracks, so you can customize the placement and make sure your fishing gear is always within reach. No more bulky tackle boxes or fishing cases; just strap it on, store your lures and essentials, and catch those fish!Tackle Caddy Track Mount Overview:TACKLE STORAGE SOLUTION - The Tackle Caddy Track Mount is perfect for anyone looking for a versatile and durable tackle storage solution. This handy device attaches tool-free to most gunnel tracks, so you can customize its placement depending on your space and needs.EASY TO USE - There's no need to bring extra tools or cases with you out on the water—just attach them, then store all of your lures, tackle boxes, pliers, and cell phones with ease. Thanks to the removable TracMount hardware which comes included, you can put the Tackle Caddy where it counts when fishing and quickly stow it away when not in use.MOUNTING OPTIONS - So don't worry about running out of mounting options; relax knowing that your essentials stay close by but out of sight! The Tackle Caddy Track Mount fits most gunnel tracks, so you can find the perfect placement for your tackle storage needs.Features: Holds 2 x Plano 3400 series Original Stowaway tackle boxes or similar Slots for pliers, keys, lures, phones, VHFs, binoculars, drink bottles, sunblock, mugs & much more... Supplied as a kit, easy to assemble UV resistant material Specifications: Weight: 1.03 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x Tackle Caddy 2 x track hardware 1 x 800mm (31.5”) of 3mm (1/8”) bungee cord for tool and tackle box retention

Read more less

Element-Proof Field Ammo Medium Box - Olive Drab A very Handy Ammo or Accessories case with the benefit of being fully waterproof. The full-length o-ring seal keeps the box airtight to prevent dust and other fine unwelcome objects from entering. This mid-sized storage box is ideal for .50 cal ammo storage, but the element-proof medium field ammo box can hold so much more than that! The water-resistant O-ring seal and brass-bailed latch secure contents to keep dust and water out. Protect .50 caliber ammunition, power tools, electronics with this heavy-duty storage box from the storage experts at Plano. Features: O-ring exterior Lockable 13.7 x 7 x 8.7 inches exterior 11.2 x 5.5 x 7 inches interior

Read more less

HydroWave H2 System Package - KVD Kevin Van Dam Signature EditionThe HydroWave KVD H2 is a Marine Audio Device based on the reactive senses of a Bass and other predatory fish. The HydroWave H2 delivers the latest in patented, sound emitting technology, effectively imitating the audible underwater sounds of baitfish and fish-feeding activities. Research has proven these sounds stimulate feeding in game fish. In addition to the 16 sound patterns on the H2 Bass HydroWave, the KVD H2 has 9 additional sound patterns designed by Kevin VanDam for specific fishing situations: Shallow Power Shallow Finesse Vegetation Top Water Schooling Off Shore Structure Off Shore Schooling Off Shore Finesse Marinas/Docks Crawfish WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Reel HangersAdjustable marine grade 316 stainless steel reel hangers securely store trolling reels on ceiling or gunnel. Fits most popular trolling reels. Hangers are easily adjusted to accomodate a wide range of reel sizes. Set includes Stainless Steel Snap-Lock Rod Holder.Features: Marine Grade 316 Stainless Steel hardware Internal stainless steel spring loaded pins Concealed fasteners Mounts horizontally, vertically, or overhead Adjustable widths Includes snap-lock rod tip holder 3 year guarantee Benefits: Non-corrosive, ideal for interiors or exteriors Spring-loaded to secure reels safely in place Sleek, clean look showcases rod and reels Versatile mounting options sure to fit any space Adjustable widths for a customized fit Mating rod tip holders feature spring activated snap locks for secure closure even in rough seas Scratch resistant vinyl interiors protect rod guides and tips This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Round Tube Rail Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Mounting system includes: Rail mount adapter, Rail mount clamps (pr), and all assembly hardware UV stabilized high-density polypropylene construction Large table is 30" by 12-5/8" deep Fits round tubing 3/4"-1-1/4" diameter Easily accessible knife and pliers holders, large table features additional hose holder and towel bar Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 30" Box Dimensions: 3"H x 17"W x 34"L WT: 9.4 lbs UPC: 035514326797

Read more less

Rod Holder Gimbal Mount Fillet Table - 20" Features: Solid one-piece construction for long life and easy maintenance Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage UV stabilized high-density polypropylene construction Medium, 20" wide by 12-5/8" deep, UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 20" Box Dimensions: 3"H x 17"W x 21"L WT: 6.9 lbs UPC: 035514326711

Read more less