Hunting & Fishing

Tournament Fish Cooler BagFeatures: 4 Strong Handles make easy work of transporting a catch of big fish Huge Capacity for the big ones that don't fit in the cooler!! Keeps your catch cool all day preventing weight loss and spoilage. Thick 3/4" closed cell foam insulation all around. Reflective liner helps preserve ice to keep fish cooler longer. Tough marine grade white vinyl exterior. Large corrosion proof zipper. 4 reinforced carry handles allow carry by 1, 2 or even 4 persons. Convenient roll-up design for compact storage until needed, then unrolls to 22" x 70". Includes nylon storage bag.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 30° LENGTH: 10-1/2" I.D.: 1-7/8" Specifications: Angle: 30 Degrees Mounting Style: Flush Box Dimensions: 5"H x 6"W x 16"L WT: 3.1 lbs UPC: 768296005573

Read more less

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 0° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 1-5/8" Length (Inches): 9" Mounting Style: Flush Angle: 0 Degrees Finish: Polished Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 2.1 lbs UPC: 768296005207

Read more less

1 Ton Twing BlockThe Twing block features a spring-loaded side opening mechanism for true one-handed rigging, even while wearing sailing gloves. Black anodized aluminum sideplates are edged with robust bumpers to protect the block, topsides, and deck. The sheave is aluminum rolling on a bearing system shared with Harken's existing 2.3T high-load snatch block. Features: Side opening side plate - Easy to rig and remove from sheet Spring loaded button release - Quick one-handed rigging Anti-capsize bar - Keeps sheave aligned on sheet ULC main bearing - Sheave turns smoothly under extreme loading Sideload balls - Carry loads especially when the block is not aligned in light air Thimble at pivot base - Use 1:1 or 2:1 up-down control Machined aluminum inner sideplates - High strength, low weight Soft polyurethane outer side plate bumpers - Protects block and deck Uses: Twing, tweaker control for code zero sheets Can be used as a snatch block when combined with a soft shackle Spinnaker sheet and guy control Specifications: Sheave Ø (mm): 38.5 mm Sheave Ø (in): 1-1/2 in Maximum line Ø (mm): 11 mm Maximum line Ø (in): .43 in Maximum working load (kg): 1000 kg Maximum working load (lb): 2205 lb Breaking load (kg): 2000 kg Breaking load (lb): 4409 lb Owner's Manual (pdf)

Read more less

Depthpower 60" Electric Downrigger w/200lb Test BraidThe most popular Scotty Electric Downrigger, with a boom that telescopes for extra reach and collapses for storage. Makes for a great “big boat” downrigger.PRODUCT OVERVIEW:  Fully adjustable decent speed, lifts 7 lb. weights at 235 ft./min. and 15 lb. weights at 203 ft./min. Spray protected positive-drive depth counter and Kevlar drive belt by Optibelt™ 300 ft. of 200 lb. test, low drag microfilament premium power braid downrigger line (No. 2701) Boom mounted adjustable 358 Rodmaster II Rod Holder Includes Scotty/Marinco™ Plug and Receptacle The lowest amperage draw of any downrigger made with less than 1/3 the battery draw than some of the competition Marine grade stainless steel boom Multi-position auto-stop included (Use 1008 Stopper Beads to stop at any pre-set position) Includes Power Grip Plus Line Release Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position Includes 1026 Swivel Pedestal Mount with 16 available positions Fully assembled and factory tested with complete saltwater protection Downrigger Boom Length: 36″-60″ telescoping stainless steel boomDownrigger Boom Diameter: 1 1/4″Rod Holder Interior Diameter: 1.85″WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Boom Length (Inches): 36"-60" Cable Length (Feet): 300' Manual/Electric: Electric Rod Holder Included: Yes Spool Construction: Plastic Swivel Base Included: Yes Box Dimensions: 8"H x 13"W x 42"L WT: 21.7 lbs UPC: 062017211060 Brochure (pdf)

Read more less

15' Telescoping Outriggers 1-1/2" DiameterTelescopes to less than 6 feet for bridge clearance, trailering and storage. Designed for universal use with Grand Slams, Sport Slams, Striker Bases, and other brands of mounts that accept 1-1/2" butt end diameter outriggers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Anodized Aluminum Diameter (Inches): 1-1/2" Finish: Silver/Silver Length (Feet): 15' Box Dimensions: 6"H x 9"W x 75"L WT: 13.5 lbs UPC: 630838011772 Brochure (pdf)

Read more less

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.900" O.D. PipeColor:WhitePipe Size:#4Fits:1.900" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.85 lbs UPC: 096811500570 Quick Guide (pdf)

Read more less

Vinyl Rubber InsertsClamp-On Rod Holder Rubber InsertsOutside diameter is about 1-7/8” or (1.902”) inches.Inside diameter is about 1-5/8” inches.Overall length is 7-1/2” inches

Read more less

Swivel Base Rod HoldersRH570Stainless Steel Side Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Bulkhead Box Dimensions: 5"H x 6"W x 13"L WT: 3.3 lbs UPC: 096811517004

Read more less

RH53130  Degree Heavy Duty Vinyl Rubber Insert for RH530, RH530SS, RH5330, RH530SS/XS, RH575

Read more less

Swivel Base Flush Mount Rod HolderPart #: RH-5367SS Medium 0 Degree Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2.05 lbs UPC: 096811530720

Read more less

Swivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 13"L WT: 3.2 lbs UPC: 096811517707

Read more less