Hunting & Fishing

X-Rap® Magnum® 15 RedheadThe massive diving-lip takes the X-Rap® Magnums deep… unassisted. Nothing to hinder the action. Each dives to its preset depth…the XRMag10 to 10 feet, the XRM15 to 15 feet, etc. Run up to 13 knots for big game fish worldwide.Features: Deep Diving Lip Models with Colored Lip for Extra Attraction Textured Translucent Body Internal Holographic Foil 3D Holographic Eye VMC® 4X Perma Steel® Hooks 3X Split Rings Big Water Patterns Specifications: Running Depth: 15' Body Length: 4-3/4" Weight: 1-1/8 oz Treble Hooks: Two No. 1/0 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Series: X-Rap Magnum Size: 4-1/4" Box Dimensions: 2"H x 2"W x 7"L WT: 0.1 lbs UPC: 022677143385

Read more less

No. 1071 Clamp MountComes with fully portable anodized aluminum clamp for mounting on the gunnel or transom (2" opening).Great for aluminum boats and canoesWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Boom Length (Inches): 12" Cable Length (Feet): 100' Manual/Electric: Manual Rod Holder Included: No Spool Construction: Plastic Swivel Base Included: No Box Dimensions: 6"H x 8"W x 18"L WT: 3.15 lbs UPC: 062017110714 Owner's Manual (pdf)Brochure (pdf)

Read more less

Backing Plate for 70 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders, or perhaps even tear through, causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and one for 80 series rod holders. Each size fits all 3 models of the series.Features: Use this backing plate for all 70 series rod holders (53670A, 53670CA, 53671A, 53671CA, 53672A, and 53672CA) 316L cast stainless steel 4" x 5-1/4" 4mm thick Use your 1/4" stainless bolts and nuts (hardware not included)

Read more less

Narrow Gunnel Flush Mount Rod Holder - Black These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: Black Length (Inches): 10" Mounting Style: Flush Box Dimensions: 3"H x 5"W x 12"L WT: 0.25 lbs UPC: 035514326674

Read more less

Fillet Table Rod Holder Gimbal Mount Gimbaled Rod Holder Mounting Accessory works on all of our fillet tables (326510-3, 326515-3, 326580-3, and 326585-3) and comes complete with hardware to mount to the table. Great for mounting a variety of accessories.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Allows side/deck mount to attach to rail. Adjustable to fit different diameter rails.

Read more less

Trap-ease750Includes No. 241 side / deck mountCrab and prawn trap roller for easy retrieval. Fits Scotty post rod holder mounts for convenient mounting and versatile positioning. Touch reinforced nylon and rigid design gives the Trap-ease ultimate strength Larger size roller with pivoting head makes for smooth operation For use with rope up to 1/2" diameter Long arm for extended reach over gunnel Adjustable arm angle WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Mini Power Grip Plus118018" wire leader with stacking, self-locating snapWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 0-degrees Length: 9 in. Inner Diameter: 1-5/8 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 14"L WT: 2.15 lbs UPC: 768296005528

Read more less

536810C - Flush Mount Rod Holder - 15 Degree - Cast - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.  The Rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Cast Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Silver Length (Inches): 10.5" Mounting Style: Surface Box Dimensions: 6"H x 6"W x 16"L WT: 3.05 lbs UPC: 768296011253

Read more less

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/16" Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010607

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 1.90" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.6 lbs UPC: 768296009755

Read more less