Hunting & Fishing

Shur-Lok Boating & FishingCrab Netw/ treated nylon netting12" x 13" x 15" Specifications: Length (Inches): 23" Width: 11" Box Dimensions: 1"H x 11"W x 23"L WT: 0.45 lbs UPC: 703485318225

Read more less

FL50 50W/120VAC Flood Light - WhiteHydro Glow Fishing Lights manufactures high quality, energy efficient, water proof lights for both above the water and underwater applications. Hydro Glow Fishing Lights utilize high output LEDs for great fish attracting capability. The fish attracting capability of our high output LED dock lights will enhance fishing, and just watching fish, right off your dock for the entire family. Factors such as water depth, clarity, boat traffic, and the desired appearance of the illuminated area should be considered when choosing the best suited dock light.The FL-50 is an "above the water" style light. The FL-50 LED floodlight is designed with a more focused beam than the DM260. This model is recommended for docks high off the water or where water conditions is stained or not very clear. The FL-50 features a focused light beam to provide greater depth of penetration. The FL-50 is 120v and comes with a 10' cord. The size of this model is about 8 inch x 8 inch in size. With only 1/2 amp draw and 50W you can easily run several lights on a single circuit. Specifications: Voltage - Input Range (Volts): 120 LED: Yes Box Dimensions: 3"H x 10"W x 13"L WT: 4.55 lbs UPC: 814347005143

Read more less

4-Rod Hanger w/Poly RackPolished Stainless/WhiteRod-tip spring design securely locks rods in position. Easy to install UV-stabilized polyethylene racks. Pre drilled recessed mounting holes and beveled edges for clean, attractive look.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Finish: Polished Mounting Style: Surface Box Dimensions: 2"H x 6"W x 25"L WT: 4.25 lbs UPC: 630838030094

Read more less

Rod Storage Systems Rod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 130Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. Specifications: Construction: Anodized Aluminum Finish: Gold Box Dimensions: 1"H x 4"W x 8"L WT: 0.4 lbs UPC: 096811075627

Read more less

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 130, 130H, 130SConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. Specifications: Construction: Anodized Aluminum Finish: Gold Mounting Style: Surface Box Dimensions: 1"H x 4"W x 5"L WT: 0.2 lbs UPC: 096811075238

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 30 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003772

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 30 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003710

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 15 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 8858541005686 Brochure (pdf)

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 0 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 835719003734 Brochure (pdf)

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 0 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3 lbs UPC: 835719003673

Read more less

Fibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pin Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

1153Terminal Kit1 Coastlock snap with swivel, (No. 1150) 3 sleeves and 1 soft bumperWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less