Hunting & Fishing

Nylon Knife & Plier Holder Constructed of injection molded polypropylene. This Knife & Pliers Holder is great for storing knives, pliers, and fishing lures. Installs with two #8 FH fasteners (included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Swivel Base Rod HoldersRH575Standard Angle 30°Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 3.1 lbs UPC: 096811517509

Read more less

3′ Flag Pole for Rod Holders/ Rocket Launchers.The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

Read more less

Plastic 30° Rod & Cup Holder - Drain - Round Top - WhiteFeatures: ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Color: White

Read more less

Stainless Steel 30° Rod & Cup Holder - Open - Oval TopFeatures 316 Stainless with Oval Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.35 lbs UPC: 857515002032 Quick Guide (pdf)

Read more less

Stainless Steel 30° Rod & Cup Holder - Drain - Round TopFeatures 316 Stainless with Round Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002018

Read more less

Swivel Base Rod HoldersRH5169Half Angle 15° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 14"L WT: 2.4 lbs UPC: 096811516533

Read more less

RH53515 Degree Heavy Duty Vinyl Rubber Insert for RH534H, RH534HS, RH5334H, RH579H

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-529HS/XS Medium 15°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 15"L WT: 1.85 lbs UPC: 096811512917

Read more less

Plastic 0° Rod & Cup Holder - Drain - Round Top - WhiteFeatures ABS Plastic with Round Top 0º Rod Angle Drain at Bottom Specifications: Angle: 0 Degrees Construction: Plastic Finish: White Mounting Style: Gunwale Box Dimensions: 5"H x 5"W x 10"L WT: 0.5 lbs UPC: 857515002209 Quick Guide (pdf)

Read more less

Plastic 0° Rod & Cup Holder - Drain - Round Top - BlackFeatures ABS Plastic with Round Top 0º Rod Angle Drain at Bottom Specifications: Angle: 0 Degrees Construction: Plastic Finish: Black Mounting Style: Gunwale Box Dimensions: 4"H x 5"W x 10"L WT: 0.5 lbs UPC: 857515002193 Quick Guide (pdf)

Read more less

Series 20 Ball Bearing Block - SingleFeatures: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction Applications: Dinghy control lines Dinghy Vangs Cunninghams Traveller controls Materials: U.V. Stabilized Acetal sheaves Stainless steel ball bearings Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks Specifications:Sheave Ø:t20mm(3/4")Max. Rope Ø:t6mm(1/4")Pin Ø: 3mm(1/8")M.W.L.:t250kg(550lbs)B. L.:t550kg(1,210lbs)Weight:t20g(0.7oz)

Read more less