Hunting & Fishing

Kayak Fishing Starter PackFishing essentials for outfitting your Kayak. The Kayak Starter Pack includes a 282 Baitcaster Spinning Rod Holder with Gear Head & Track-Holds a bait caster reel securely in the cushioned cradle. 438 Gear Head Track Adapter-slide the Gear Head into any of our 440 series track, twist the gear head clockwise to securely lock. 440-4 4” Low Profile Track-top load design allows for quick and easy setup. 311 Drink Holder-fits cans, coffee mugs and insulated sleeves. 136 Paddle Clip-holds your paddle, net, gaff & boat hook. 455 Baitboard & Accessory Tray-Exterior tray walls lets you cut bait and prep lures. Also included are your Stainless steel fasteners-18 pieces #10 x 5/8.*Not intended for use with inflatable kayaks.Includes the following Scotty part numbers: 440-4, 455, 438, 311, 282 and 136

Read more less

Original Rod Holder 8" & 6" Set - Double StrapThe Original 8 Inch and 6 Inch strap is our smallest set of 2 straps.  8 Inch strap for the handle end of the rod and the 6 inch strap for the tips.  Holds up to 4 Rods.  includes stainless steel mounting hardware.

Read more less

70 Series Standard Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water. Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 1.95 lbs Quick Guide (pdf)

Read more less

Elite Rigging Kit - Black NylonTop Quality KitFeatures: 100' of Black Nylon Braid Pair of EZ release clips Pair of 1-3/4" cork stops Pair of single swivel snubbers Pair of eye straps with screws 4 leader snaps

Read more less

Rod/Cup Holder - 304 Stainless Steel - 15°Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place. Features: 304 S.S. 15° Rod/Cup Holder Material: 304 Stainless Steel Rod Holder Degree: 15° Cupholder O.D.: 4-3/4" Depth: 2-1/2" Cut-Out: 4"

Read more less

10.5" 15-Degree Swivel Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-5/8" Cut Out Requires Installation Wrench

Read more less

Power Grip Plus Release18" heavy monofilament leader with cannonball snap.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1153Terminal Kit1 Coastlock snap with swivel, (No. 1150) 3 sleeves and 1 soft bumperWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Power Grip Plus11906 Replacement Power Grip Pads

Read more less

200 ft. Downrigger CableOne strand, wrapped and reinforced with 6 surrounding strands to provide the ultimate in strength and consistency. Includes terminal kit.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Aqua-Life™ Single Output 110V AeratorAqua-Life® Products run so quietly you'll forget you're aerating your bait. You'll know you are by the healthy condition of your bait. Aqua-Life® products feature a whisper quiet motor that runs efficiently at a low volume. Aqua-Life® products also utilize a special micro-bubble oxygen diffuser that produces clouds of tiny bubbles. Smaller more numerous bubbles mix readily as they collide and dispense through the entire water column. In bait containers, smaller bubbles are important as they are less prone to damage delicate baitfish. Each Aqua-Life® product includes the diffuser and a 30" non-kink air hose (Hoses and stones also sold separately as an accessory).Features: Aerates up to 15 gallons Produces close to 100% saturation of dissolved oxygen Rubber non-marking feet UL approved 6' power cord Includes: 30" of flexible air hose, 2" long air stone, anti-siphon valve Specifications: Volts: 110v Width: 8" Length (Inches): 9" Height: 4" Box Dimensions: 4"H x 8"W x 9"L WT: 0.85 lbs UPC: 082271214225

Read more less

Concept A Baitcast Reel - 5.6:1 - RHConcept A Gen II is the ultimate fishing partner. Tough as nails, reliable, and more capable than ever, you won’t ever leave this reel at home. The new Bulldog Carbon Drag system is back and ready to stop the biggest trophy fish you can find with 25 lbs of stopping power. Equipped with our H.A.M. hardened brass main gear and cut with Japanese Hamai precision, it’s a formidable weapon. The ultra-low palm fitting design now features 25% more line capacity without increasing the overall size of the reel. The strength and durability of the Concept A Gen II can be seen through new design features like its Railed Clutch Cam, Gen II Line Guide, and new Water Channeling Design intelligence. It’s packed with unique and patented 13 Fishing only features like the Arrowhead Line Guide, Beetle Wing Rapid Access Side Plate, and KeepR Integrated Hook Keeper. A new Low-Friction Braking system provides anglers with smaller more relevant adjustments for all lure weights. The Concept A Gen II delivers the performance, reliability, and features you need for day-after-day tournament-level fishing. Features: HD Aluminum Frame with Ocean Armor 2 Treatment and Anti-Electrolysis Screw Pads H.A.M. Japanese Hamai Cut Hardened Brass Drive Gear 25 lb Bulldog Drag System 7BB (2 High Spin Corrosion Resistant BB, 4 Stainless BB, 1 Dead Stop Anti-Reverse) Arrowhead Line Guide Reinforced Clutch Cam KeepR Integrated Hook Keeper Generation II Hard Anodized Worm Shaft Low-Friction 6-Way Braking System Beetle Wing Rapid Access Side Plate System Dead Stop Anti-Reverse Specifications: Retrieve: Right-hand Gear Ratio: 5.6:1 Weight: 7.4 oz Max Drag: 25 lbs Bearing: 7 Line Capacity: 12/125 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bearing Count: 7 Gear Ratio: 5.6:1 Handle Position: Right Max Drag: 25 lbs Style: Baitcast Low Profile Box Dimensions: 3"H x 5"W x 6"L WT: 0.7 lbs UPC: 850007590727

Read more less