Hunting & Fishing

Aqua-Life® Aerator Dual Output 110V Greater Than 25 GallonsAqua-Life® Products run so quietly you'll forget you are aerating your bait. You'll know you are by the healthy condition of your bait. Aqua-Life® products feature a whisper quiet motor that runs efficiently at a low volume. Aqua-Life® products also utilize a special micro-bubble oxygen diffuser that produces clouds of tiny bubbles. Smaller more numerous bubbles mix readily as they collide and dispense through the entire water column. In bait containers smaller bubbles are important as they are less prone to damage delicate baitfish. Each Aqua-Life® product includes the diffuser and a 30 inch non-kink air hose. (Hoses and stones also sold separately as an accessory.)Features: Dual pumps-aerates 1 or 2 livewells (Up to 50 gallons) Produces close to 100% saturation of dissolved oxygen Rubber marking feet UL approved 6' power cord Includes: 5ft of flexible air hose, 2 each 2" long air stones, t-connector, 2 anti-siphon valves Specifications: Volts: 110v Width: 10" Length (Inches): 10" Height: 5" Box Dimensions: 5"H x 10"W x 10"L WT: 1.7 lbs UPC: 082271114211

Read more less

Knife Plier Rack and Tackle Molded Solid Single Piece of Tough Polpropylene. Holds Two Knives, Plier and has 15 Tackle Hang Holes. Corrosion proof. UV Resistant. 9" tall x 4" wide x 2-1/4" deep. Stainless Mounting Screws Included. **Knives, Plier and lures not included**

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5202SLColor:   SilverFits:      1.315" O.D. PipeMount:  HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Silver Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.8 lbs UPC: 096811520219

Read more less

GoPro Camera AdapterCamera Adapter compatible with GoPro Cameras and Shurhold Handles. Extend the versatility of your camera by quickly and easily attaching it to any Shurhold handle.Hundreds of great uses: Capture underwater footage from inside the boat or on the dock Use to get above the crowd Use to capture moments of yourself scuba diving and more Set in rod holder for aerial view of all the fishing action Use to inspect under vessel or vehicle or other hard to reach areas

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-534HS/XS Heavy 15°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.6 lbs UPC: 096811513419

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5005SLColor:   SilverFits:      2.375" O.D. PipeMount:  VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Silver Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.9 lbs UPC: 096811500518

Read more less

Fishing Series HandlesThe Fishing Series handles are a unique new design that focus on the same quality as Shurhold?s original handles but also places emphasis on the handles aesthetic. The handles are sleek black with hand wrapped gold trim, and extra long foam fishing style grips for added comfort. This handle will match the look and feel of most fishing rods. The Fishing Series handle also features Shurhold?s exclusive SHUR-LOK quick release system which positively locks quickly and easily with any Shurhold accessory. 760FS - 5' (152 cm) Fixed Length HandleLightweight and convenient. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 61"L WT: 1.05 lbs UPC: 703485120484

Read more less

Fluorocarbon Leader - 150lb - 18"This premium fluorocarbon leader features an extra-strong clear Sufix® 100% fluorocarbon line with a premium ball bearing swivel and unique Touch-Lok Snap. This strong, light, and ultra-thin snap offers “easy on – easy off” lure replacement, but ensures exceptional locking strength, thanks to its unique design. Features: Extra Strong Clear Sufix® 100% Fluorocarbon Welded Rings Hex-Crimp Premium Ball Bearing Swivels Unique Touch-Lok Snap Strong, Light, and Thin WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Top Gun Backing PlateSecure your new Top Guns with custom-designed backing plates made of anodized aircraft aluminum. These backing plates work with any bolt-in Top Gun or Z-30 outrigger bases. Needed when top thickness is not sufficient to support outrigger bases. Sold individually - 2 required.

Read more less

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30° The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 3-5/9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 1.45 lbs UPC: 035514325042

Read more less

Shur-Lok AdaptersThreaded Adaptercompatible with most internally threaded products Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 4"W x 7"L WT: 0.15 lbs UPC: 703485101018

Read more less

Premium Mono Double Rigging KitIf you want to get on the water fast and have exactly the right components to rig your outriggers, the Premium Double Mono Rigging Kit is packaged just for you. Complete with 400-pound mono halyard line, this kit provides high-quality parts to get two baits on each outrigger pole swimming and covering a wide spread.Includes: Used on Carbon Fiber Outrigger Poles 20' long Double roller pulley shock cord with stainless-steel snap hooks 1/8" thick, 180' coil of Lindgren Pitman 400# Monofilament in Black Adjustable tension release clips 1-3/4" outrigger line stops Stainless-steel eye strap and screws Double sleeve crimps Coastlock-style swivels and snap swivels Quick-dry mesh bag 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less