Hunting & Fishing

832® Advanced Superline® Braid - 10lb - Low-Vis Green - 300 ydsSufix® 832® Advanced Superline® is the strongest, most durable small diameter braid on the market. R8 Precision Braiding and fiber technology provide superior strength, roundness, and line consistency. 832 Advanced Superline has 8 fibers (7 HMPE fibers plus 1 GORE® Performance Fiber) and 32 weaves (pics) per inch. GORE® Performance Fibers improve abrasion resistance, increase casting distance & accuracy and reduce line vibration. HMPE fibers provide high strength & sensitivity, hydrophobic water-repellent protection, and small diameter.Features: 8 Fibers (Featuring one GORE® Performance Fiber and 7 HMPE Fibers) 32 pics (weaves) per inch R8 Precision Braiding Technology Ultimate Abrasion Resistance Unbeatable Strength Proven Castability Improvements TPG™ Technology Enhances Color Retention WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Break Strength: 10 lb. Color: Green Length: 300 yds Series: 832 Box Dimensions: 1"H x 4"W x 5"L WT: 0.15 lbs UPC: 024777662605

Read more less

The Original "Snapper" Line Release104118" leader with stacking, self-locating snapThe fishing line is gripped between the soft pads with variable release tension attained by moving the line in or out of the jawsWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

No. 350 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinIncludes No. 241 combination deck or side mount.Bolting dimensions: 1 5/16" x 3 3/16"

Read more less

Knife Plier Rack and Tackle Molded Solid Single Piece of Tough Polpropylene. Holds Two Knives, Plier and has 15 Tackle Hang Holes. Corrosion proof. UV Resistant. 9" tall x 4" wide x 2-1/4" deep. Stainless Mounting Screws Included. **Knives, Plier and lures not included**

Read more less

Fishing Series HandlesThe Fishing Series handles are a unique new design that focus on the same quality as Shurhold?s original handles but also places emphasis on the handles aesthetic. The handles are sleek black with hand wrapped gold trim, and extra long foam fishing style grips for added comfort. This handle will match the look and feel of most fishing rods. The Fishing Series handle also features Shurhold?s exclusive SHUR-LOK quick release system which positively locks quickly and easily with any Shurhold accessory. 760FS - 5' (152 cm) Fixed Length HandleLightweight and convenient. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 61"L WT: 1.05 lbs UPC: 703485120484

Read more less

Top Gun Backing PlateSecure your new Top Guns with custom-designed backing plates made of anodized aircraft aluminum. These backing plates work with any bolt-in Top Gun or Z-30 outrigger bases. Needed when top thickness is not sufficient to support outrigger bases. Sold individually - 2 required. Specifications: Construction: Aluminum Product Class: Mounting Brackets Box Dimensions: 0"H x 6"W x 9"L WT: 0.62 lbs UPC: 784703000573

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 2.375" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 2-3/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.8 lbs UPC: 768296009779

Read more less

Pontoon Square Rail Adjustable Clamp On Rod HolderAll the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. Our clamp fits 1" to 1-1/4" square rail Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp Angle around the rail is infinitely adjustable Angle to the left or right adjusts in 15 degree increments 9" tall tube with 1-5/8" ID Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Rail Box Dimensions: 2"H x 8"W x 13"L WT: 1.9 lbs UPC: 768296008338

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:BlackPipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.8 lbs UPC: 096811500587

Read more less

Backing Plates For Grand Slam Outriggers (pair)Part #: BP-150BSY-320-1Specifically made for additional support for Grand Slam Outriggers when mounting to hard tops and gunnels. Made of Anodized Aluminum.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Aluminum Length (Feet): 6" Product Class: Mounting Brackets Box Dimensions: 2"H x 6"W x 8"L WT: 1.2 lbs UPC: 630838015428

Read more less

Grand Slam 170-2 Center Mount Uses TACO's spline lock technology for secure outrigger elevation Designed for use with standard 1-1/8" butt OD outriggers Locks every 18° Derlin bearings and stainless steel internal locking mechanism offer smooth adjustments, secure positioning and prevent movement Rugged, sure-grip knob adjusts and locks-in desired height & laydown position for safe trailering and navigation under bridges Stainless steel arm with locking feature ensures TACO outriggers remain securely in place This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-1/8" Finish: Silver Product Class: Mounting Brackets Box Dimensions: 7"H x 9"W x 12"L WT: 6.3 lbs UPC: 630838082710

Read more less

Side Mount 6 Rod HolderSide Mount Rod Savers are for vertical or horizontal applications. They are designed to hold rods and reels in a crisscross manner to enable more rods to be stored in a smaller space. Holds up to 4-6 Rods. 

Read more less