Hunting & Fishing

X-Rap® Magnum Stick 17 - HD Hot Pink UVThrow the stick out and let them fight over it. The X-Rap® Magnum Stick 17 casts far and swims in wide curves, making it a natural for fast and aggressive retrieves. Once stopped, this lipless bait dives head-down with a flutter that will make any saltwater predator pounce. To make it better, the X-Rap® Magnum Stick’s scalloped internal reflective construction gives off a life-like flash – even with the slightest motion. The lure’s heavy-duty construction with strong through-wire makes sure this stick won’t crack on you. Features: Magnum Durability Through-wire Construction X-Rap Finishes Textured Translucent Body 3D Holographic Eye Saltwater Prey Patterns Long Casting Internal Holographic Foil VMC® 7266 TI Inline Single Hooks Specifications: Body Length: 17cm Running Depth: Variable Weight: 88g Hook Size: Two No. 6/0 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Series: x-Rap Magnum Stick Size: 6-3/4" Box Dimensions: 2"H x 2"W x 10"L WT: 0.25 lbs UPC: 022677327631 Brochure (pdf)

Read more less

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 0-DegreeThese are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. They are fully engineered and made of a UV-resistant rubber compound.Note: It is recommended that a small application of either Sikaflex or Loctite 480 be applied after installation between the rubber and stainless tube down at the gimbal pin height for extra holding properties.

Read more less

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 15-DegreeThese are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. They are fully engineered and made of a UV-resistant rubber compound.Note: It is recommended that a small application of either Sikaflex or Loctite 480 be applied after installation between the rubber and stainless tube down at the gimbal pin height for extra holding properties.

Read more less

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 30-DegreeThese are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. They are fully engineered and made of a UV-resistant rubber compound.Note: It is recommended that a small application of either Sikaflex or Loctite 480 be applied after installation between the rubber and stainless tube down at the gimbal pin height for extra holding properties.

Read more less

XD Top MountFor use on sport fishing boats up to 40 feet.Features: Unique invertible Tigress handle design for use on both soft and hard tops over 2” thick Accepts all Tigress XD 1-1/2” butt diameter outriggers and XD 1-1/8” butts using adapter Fits Tigress and other industry standard 4” x 6” mounting plates (four 5/16” diameter fasteners) Extreme-duty 316 Stainless Steel and anodized aluminum and sealed construction with UV protection 24 adjustable/locking system positions (15° increments) featuring Tigress XD 316 Stainless Steel design 19 upper-arm angle/locking positions (10° increments) using Tigress XD 316 Stainless Steel detent design with ambidextrous horizontal stops Tigress XD 316 Stainless Steel detent design with ambidextrous horizontal stops Large 3-lobe UV ergonomic knob with integral detent feature when changing outrigger elevation Ergonomic 316 Stainless Steel mirror-polished lever design with inverting ability for extra hand clearance on the thickest tops. User friendly underside lever actuation, with 8 optional indexable set-up positions Standard ¼” diameter locking stainless steel push-in-pin for outriggers Fits through all standard 3” diameter mounting plates and hard top holes Sold as pair 3-Year Limited Warranty

Read more less

XD Flag PoleSpecifications:• 42” Rod Holder Flag Pole• Holds two 12” sandbar flags or one 20”x 24” dive flag• Gimbal butt makes flying in any rod holder a breeze• Made of anodized aluminum• Easy to store

Read more less

Portable Cleat - 15" Tall with 9" CleatFeatures: Constructed of anodized aluminum Perfect for holding a fender at the sandbar, using as an extra cleat, or using as a hose holder while washing your boat 15" Portable Cleat is ideal for transom cross tie Easily stowable, portable, and great for travel Fits standard 1-5/8” rod holders

Read more less

1-1/2" Polished SS Adjustable Clamp-On Rod Holder Choose the angle you need while providing the versatility of mounting either horizontally or vertically Clamp-on rod holders are sized IPS pipe Includes a heavy white vinyl liner Rod holder ID 1-5/8" Quick Guide (pdf)

Read more less

XD Telescoping Aluminum Outrigger PolesFor use on sport fishing boats up to 40 feet.Features: Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignment Larger tube diameters and wall thicknesses for increased strength and durability Anodized cold draw tubes inside and out for maximum protection from corrosion Double-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less ‘hole wallowing’ Redesigned rings and tips 316 Stainless Steel polished eyelets UVI marine grade thermoplastic internal bushings for trouble free sliding operation Double ¼” cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pin UVI thermoplastic butt sleeves to fit all 1-1/2" top and center rigger mounts Retracts to under 6’ for trailering, bridges and storage Includes a handy, heavy duty mesh storage bag Sold as pair 3-Year Limited Warranty Specifications: Length: 18' Base OD: 1-1/2" Color: Black Specifications: Construction: Aluminum Diameter (Inches): 1-1/2" Finish: Black Length (Feet): 18' Box Dimensions: 3"H x 4"W x 73"L WT: 14.9 lbs UPC: 661033892514

Read more less

XD Telescoping Aluminum Outrigger PolesFor use on sport fishing boats up to 40 feet.Features: Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignment Larger tube diameters and wall thicknesses for increased strength and durability Anodized cold draw tubes inside and out for maximum protection from corrosion Double-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less ‘hole wallowing’ Redesigned rings and tips 316 Stainless Steel polished eyelets UVI marine grade thermoplastic internal bushings for trouble free sliding operation Double ¼” cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pin UVI thermoplastic butt sleeves to fit all 1-1/2" top and center rigger mounts Retracts to under 6’ for trailering, bridges and storage Includes a handy, heavy duty mesh storage bag Sold as pair 3-Year Limited Warranty Specifications: Length: 15' Base OD: 1-1/2" Color: Silver Specifications: Construction: Aluminum Length (Feet): 15' Finish: Silver Diameter (Inches): 1-1/2" Box Dimensions: 3"H x 4"W x 73"L WT: 13.6 lbs UPC: 661033889248

Read more less

Stainless Steel Rod & Cup Holder Threaded Backing PlateThis threaded backing plate is designed to be used with ALL Mate Series Combination Rod and Cup Holders EXCEPT Elite Screw-less.Features: Cast 316L Stainless Steel Access to the underside is NOT required Machine screws included Quick Guide (pdf)

Read more less

5 Rod Aluminum Transom Mount Rod Holder - 35" Constructed of cold drawn anodized aluminum Includes white liners to protect your rod

Read more less