Hunting & Fishing

No. 1106The most popular Scotty Electric Downrigger, with a boom that telescopes for extra reach and collapses for storage. Makes for a great “big boat” downrigger.PRODUCT OVERVIEW:  Fully adjustable decent speed, lifts 7 lb. weights at 235 ft./min. and 15 lb. weights at 203 ft./min. Spray protected positive-drive depth counter and Kevlar drive belt by Optibelt™ 250 ft. of 150 lb. Test, Stainless Steel Downrigger Cable Boom mounted adjustable 358 Rodmaster II Rod Holder Includes Scotty/Marinco™ Plug and Receptacle The lowest amperage draw of any downrigger made with less than 1/3 the battery draw than some of the competition Marine grade stainless steel boom Multi-position auto-stop included (Use 1008 Stopper Beads to stop at any pre-set position) Includes Power Grip Plus Line Release Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position Includes 1026 Swivel Pedestal Mount with 16 available positions Fully assembled and factory tested with complete saltwater protection Downrigger Boom Length: 36″-60″ telescoping stainless steel boomDownrigger Boom Diameter: 1 1/4″Rod Holder Interior Diameter: 1.85″WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Boom Length (Inches): 36"-60" Cable Length (Feet): 250' Manual/Electric: Electric Rod Holder Included: Yes Spool Construction: Plastic Swivel Base Included: Yes Box Dimensions: 7"H x 13"W x 43"L WT: 23.45 lbs UPC: 062017111063 Owner's Manual (pdf)Brochure (pdf)

Read more less

Power Grip Plus117860" Wire leader with stacking, self-locating snap4 1/4" in length Streamlined design won't snag on weeds or foul lines Greater range of release tensions "tension adjuster" doubles the holding power if needed Large, easy to handle shape The line release is the critical link between the downrigger and the fishing rod. If it does not perform properly you will lose both valuable fishing time and fish. The fishing lien is gripped between the soft pads with variable release tension attained by moving the line in or out of the jaws. The line release is attached to either the weight or the cable. "tension adjuster" doubles the holding power.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

No. 1073 Bracket MountThis Laketroller comes with a No. 241 Combination Side/Deck Mount, allowing you to mount onto a flat deck surface, side of a gunnel or transom. The mounting option offers 360 degree rotation.  Easy adjust drag brake Stainless steel and nylon construction 100 ft. of 150 lb. Test, Stainless Steel Downrigger Cable 1 ft. per turn of the spool Includes 241 Combination Side/Deck Mount Includes Mini Power Grip Plus Line Release Recommended for use with weights under 4 lbs. Mount Dimensions: 4” x 2” x 2”Bolting Dimensions: 1 5/16” x 3 3/16”WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Boom Length (Inches): 12" Cable Length (Feet): 100' Manual/Electric: Manual Rod Holder Included: No Spool Construction: Plastic Swivel Base Included: No Box Dimensions: 6"H x 8"W x 18"L WT: 2.4 lbs UPC: 062017010731 Owner's Manual (pdf)Brochure (pdf)

Read more less

Bait Caster / Spinning Rod HolderHolds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.Includes No. 241 combination deck or side mount. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

280 Bait Caster / Spinning Rod HolderHolds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.Includes No. 241 combination deck or side mount. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

ORCA Rod HolderThe fastest rod release on any holder on the marketFibre reinforced engineering nylon, offers strength, resilience and reliabilityCompletely adjustable to multiple vertical and horizontal positions400 ORCA Rod Holder with 241L LOCKING push button combination side/deck mount

Read more less

A line release is the critical link between the downrigger and the fishing rod. If it does not preform properly you will loose both valuable fishing time and fish. The fishing line is gripped between the soft pads with variable release tension attained by moving the line in or out of the jaws. The line release is attached to either the weight or the cable.

Read more less

Triple Rod HoldersScotty's multiple rod holder comes with a built-in lur and accessory rack, which give you quick access to your lures and toolsNo. 362 Triple rod holder permanent mount board only

Read more less

No 358 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinFits 1 1/4" Scotty downrigger booms - clamp on sytleWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

No. 1010Works only with DepthKing & DepthMasterIncluded with DepthKing & Depthmaster, can also be used to work with the 1025 through 1029 optional mountsDimensions: 4 3/4" x 5 5/8"Bolting Dimensions: 2 5/8" x 4 7/8"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

No. 287 7/8" Round Rail MountProvides versatile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold this tough mount securely in place. Works with all Scotty post mount rod holdersFits 7/8" round rails.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Large Stainless Steel Bolt-less Swivel Rod Holder - 15°2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever!Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides. These larger diameter rod holders are available at 0° 15° & 30° angles. To be used with the Large Stainless Steel Backing Plates 10-1476-40WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less