Hunting & Fishing

Weld On Aluminum Flared Rod Holder without Blade 10" Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 30-degrees Length: 9 in. Inner Diameter: 1-5/8 in. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 11"L WT: 2.2 lbs UPC: 768296005542

Read more less

Adjustable Mid Mount Rod Holder - 1.66" or 1-1/2" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1.66" or 1-1/2" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-1/2" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010669

Read more less

Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with SleeveC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Horizontal Fits rails with 1.66" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/16" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010621

Read more less

70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Gimbal Bar Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.Features: 316L stainless steel Fits 2-3/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 15 degrees Bottom Style: Bar Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Gimbal Bar: ¼ in. wide x ½ in. tall Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 1.9 lbs UPC: 768296011307 Quick Guide (pdf)

Read more less

Knob & Nylon Washer Replacement knob and nylon washer.Compatible With: T10-449B-HDP Cleaning station T10-591 Horizontal Round rail mount R10-626 Rail-mounted kayak/SUP rack *Sold as an Individual

Read more less

Round Tube Rail Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Mounting system includes: Rail mount adapter, Rail mount clamps (pr), and all assembly hardware UV stabilized high-density polypropylene construction Large table is 30" by 12-5/8" deep Fits round tubing 3/4"-1-1/4" diameter Easily accessible knife and pliers holders, large table features additional hose holder and towel bar Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 30" Box Dimensions: 3"H x 17"W x 34"L WT: 9.4 lbs UPC: 035514326797

Read more less

Two Pole Side Mount Rod Storage Rack - WhiteThese Two Pole Side Mount Rod Holder are constructed from one-piece of injection molded UV stabilized polypropylene. No assembly required, easy installation. Built-in knife and lure holder. Accommodates rods up to 1-3/4” in diameter. 325028-1 and 325029-1 include four #8 stainless steel mounting screws.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

30 Degree Fixed Standard Rod HolderThis Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.Features:Forged end cap that gives an unbreakable rod supportSpecifications: Angle: 30-degrees Material: Stainless steel Liner: White Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 2.5 lbs UPC: 784703001297

Read more less

0 Degree Standard Swivel Rod HolderThis Rupp standard-size rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 0-degrees Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 4"H x 5"W x 13"L WT: 3 lbs UPC: 784703001266

Read more less

Double Lok-Up Halyard Line Lock w/BungeeRupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. Double Pulley with 12" military grade bungee for Double Rigging.Robust design that includes the following: Spring loaded trigger for positive locking and unlocking. Modular design that is adaptable to various rigging setups. Accepts a wide array of halyard line material and thicknesses. Replaceable, serviceable locking components. Available in Single, Double and Triple systems. Military grade bungee cord with stainless steel hardware. Specifications: Product Class: Rigging Box Dimensions: 2"H x 5"W x 8"L WT: 0.3 lbs UPC: 784703000320

Read more less

Halyard Line Locks Triple/Rope & ShackleRupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. Triple Pulley with 12" military grade bungee for Triple Rigging.Robust design that includes the following: Spring-loaded trigger for positive locking and unlocking. Modular design that is adaptable to various rigging setups. Accepts a wide array of halyard line material and thicknesses. Replaceable, serviceable locking components. Available in Single, Double, and Triple systems. Military grade bungee cord with stainless steel hardware.

Read more less