Lighting

Surface Mount Oblong LED Courtesy Lamp - White LED - Stainless Steel BezelOblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread.Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes.Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry.Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included.Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24v Housing: Stainless LED Color: White Dimming: No Box Dimensions: 2"H x 4"W x 6"L WT: 0.15 lbs UPC: 9416325234005 Brochure (pdf)

Read more less

Rub Rail Mounted Navigation Lights for Boats Up To 30' - Port & Starboard IncludedTACO's latest addition to its Rub Rail offering is the Rub Rail Mounted LED Navigation Light. These sleek, low-profile lights are mounted onto a heavy gauge Stainless Steel cover designed to fit several of Taco Marine's most popular Rigid Vinyl Rub Rail profiles that are ideal for 18' to 30' boats.Features & Benefits: 3-Watt Port (Red) and Starboard (Green) LEDs Low-draw, less than 0.25 Amperes Enables more deck space Easy installation Stainless Steel High Polish Reliable long-life LEDs will increase hours of maintenance-free service Designed to fit the popular Taco Marine V21-9659, V21-9904, V21-9909, and V21-9959 Rub Rail profiles For use on up to 30' boats 112.5° unobstructed view, with less glare Meets ABYC-USCG requirements Low-voltage 12-14VDC Anodized aluminum heat sink for maximum heat dissipation LED lights are mounted in a heavy gauge polished Stainless Steel joiner cover Water-resistant, IP68 rating Takes a 1" - #8 Stainless Steel fastener (not included) Kit Includes: Set of two LED navigation light assemblies, Port (Red) and Starboard (Green) Installation Instructions This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Housing: Stainless Lens Color: Red/Green Box Dimensions: 2"H x 4"W x 5"L WT: 0.45 lbs UPC: 630897088937

Read more less

Apelo A1 RGB Underwater Light - 1800 Lumens - Black Housing - Charcoal LensTurn up the party, select the mood, switch on the fish magnets. Apelo underwater lighting brilliance by Hella Marine lets you do it all. Select between incredibly intense white or vibrant blue for amazing illumination experiences. Take complete control and choose any color you wish with Apelo RGB.Features: Intense white and vibrant blue illumination, or select Apelo RGB for complete control of the color spectrum Optical Intelligence: Wide horizontal illumination with a narrow vertical angle for a spectacular effect Corrosion-resistant thermal polymer housing and Grilamid high strength nylon lens Completely sealed and electronically protected Robust surface mount design Advanced thermal management ensuring ongoing protection and no damage by operation out of the water Charcoal or white lens Suitable for hulls of any material Specifications: Material: Plastic Mounting Style: Surface Voltage - Input Range (Volts): 12/24 Box Dimensions: 4"H x 4"W x 6"L WT: 1 lbs UPC: 4082300823202 Brochure (pdf)

Read more less

Navilight 2NM Tricolor w/Navimount Base & RIB Mount - BlackNavimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount Base lights include a U-Bracket and Navibolt-bracket.Features: Tricolor Masthead light 135° white, 112.5° red, 112.5° green with 12 hour burn time BiColor side light with 20 hour burn time Red side light with 38 hour burn time Green side light with 38 hour burn time White Sternlight with 32 hour burn time Navimount RIB - Black The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly Includes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: White/Red/Green Visible Range (Miles): 2nm Housing: Black Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) LED: Yes Box Dimensions: 2"H x 4"W x 7"L WT: 0.7 lbs

Read more less

LED Aluminum Dock LightThe Marine Grade Solar Deck Lite is an industrial strength solar powered dock light made from anodized aluminum for superior weather resistance in marine environments. IP68 waterproof design. Super bright LEDs, powerful solar panel and changeable AAA (NiMH) batteries provide all night illumination. Low-profile design makes these lights perfect for docks and marina applications needing to provide ambient pathway and dock lighting. Added built-in reflector provides extra safety for passing boaters and makes them ideal for marking swim rafts. Easy hassle-free mounting, no wires, no mess, no electrical cost.Dimensions: 4-1/8" x 4-1/8" Approx. 7/8" Tall

Read more less

Natural White G4 Bulb 2W 10-30VDC Bottom Pin Silicon EncapsulatedThe Lunasea LED G4 Light produces light with a 360 degree spread instead of being the traditional directional beam. At over 200 lumen output this light replaces a 25-30W Halogen. This soft 2700K Natural White bulb will meet the requirement. Designed to be dimmable, there will be no flicker like older style LED's. Encapsulated to protect from the elements.Technical Information Input Voltage: 10-30VDC Warranty: 3 Year Input Watts: 1.5W Output: 210 Lumens Dimensions: 36mm x 10mm Specifications: Voltage - Input Range (Volts): 10-30v Box Dimensions: 2"H x 5"W x 6"L WT: 0.05 lbs UPC: 850001461214 Brochure (pdf)

Read more less

Multi-Zone Lighting Controller KitThe Shadow-Caster Zone Controller allows a user the ability to seamlessly control up to 4 zones of lighting independently, or synchronize zones together for a clean, uniform look. Easily switch colors, adjust brightness, or synchronize lights with music. The SCM-ZC-Kit comes with a remote push button head unit for easy push-button control. Features: Control Up to 4 Zones of Standard 4-wire RGB+ or Shadow-Caster Lights Quickly Adjust and Change Color and Brightness of Connected Lights Control Multiple Configurations of Color-Changing Patterns and Modes Includes 3.5 mm Audio Input for easy Lights and Music Synchronization Supports Up to 500 Watts of RGB Lighting Includes IP65-Rated Push-Button Head Unit 2-Year Warranty

Read more less

Ethernet Communications Bridge & Multi-Zone Controller KitThe Shadow-Caster MFD ( Multi-Function Display) Lighting Controller gives you full control of up to 6 independent zones of lighting on your vessel using your touchscreen MFD. Easily switch colors, adjust brightness, or synchronize lights with music. Set up scenes and deploy multiple changes to your zones all with one touch. Save your favorite settings and recall them later. Compatible with a wide range of MFD models from a range of manufactures including Garmin, Simrad, Lowrance, and B and G, Raymarine, and Furuno. The SCM-MFD-LC is a kit that comes with two Shadow-Caster products. The Multi-Zone Lighting Controller ( SCM-ZC-SA) and the MFD Ethernet Communication Bridge ( SCM-MFD-Bridge). Allows a user to easily control all of the Shadow-Caster and Standard RGB lighting on their vessel. Designed to comply with an emerging NMEA lighting standard, the controller is designed to work on a CAN or NMEA2000 type network, through the use of Shadow-NET protocol CAN ( Control Area Network) Commands. Features:  Control Up to 6 Zones of Standard 4 or 5 wire RGB or Shadow-Caster Lights  Quickly Adjust and Change Color and Brightness of Connected Lights  Control Multiple Configurations of Color-Changing Patterns and Modes  Includes 3.5 mm Audio Input for easy Music Synchronization

Read more less

LightLink™ Pro LED Module for Apeiron PROPress and hold momentary switch to initiate light color cycle. Dimming cycle continues to dim as long as switch is engaged. Briefly press and release momentary switch for on/off operation. For 2 and 3 Color enabled Fixtures, double-click momentary switch to enter color 2, triple-click for color 3. Add additional momentary switches in parallel with the shown switch for multi-location control. Upon loss of power, intensity and LED color of controlled Fixtures return to previous state, using LightLink’s onboard non-volatile memory.Features:9-36V DC Input Low Level Dimming Using Momentary Switch Interface Enables Smart Tri-Color Operation Small Size, Fully PottedNon-Volatile Memory Recalls Last Intensity Specifications: Type: Parts Box Dimensions: 2"H x 2"W x 4"L WT: 0.1 lbs Quick Guide (pdf)

Read more less

Ember E1150Z Snap-In - Polished Chrome - Round  - Cool White LightProduct Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24v Housing: Chrome LED Color: Cool White Dimming: Yes Box Dimensions: 3"H x 3"W x 3"L WT: 0.2 lbs Brochure (pdf)

Read more less

SR-L Series Flush Mount Spreader Light - Black Housing - Amber HaloThe RIGID SR-L Series Spreader light provides an easy way to add convenient area lighting and style to any vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any vehicle. The halo backlighting is available in one of four colors: red, blue, amber, or white. Use the flying leads wiring to wire the SR-L Series Spreader light directly into your vehicle’s electrical system or purchase the RIGID wiring harness separately (Part #40300 - Sold Separately). The SR-L Series Spreader offers the same legendary RIGID build quality as the rest of RIGID’s products, from the high-grade aluminum housing to the impact resistant polycarbonate lens. Packed with power and style, the SR-L Series makes it easier than ever to Own the Night. Features: 9-36 VDC Pressure Equalizing Valve High Impact Polycarbonate lens Dedicated Wire to Run Backlight Removable Surround for Color Matching Wiring Harness Sold Seperately #40300 Halo Backlight Available in Blue, Red, White, & Amber Surface Mount and Flush Mount Available 120 Degree Wide Beam Pattern No Exposed Hardware High Grade Aluminum Alloy Housing and Heatsink ∗ Sold as a Pair Brochure (pdf)

Read more less

Phoenix XL Pod 7" LED LightThe Phoenix XL 7" light pod features over 14,000 lumens and five selectable color modes, allowing drivers to instantly switch between Cool White, Natural, Full Power, Warm, and Amber at the push of a button. No stopping and no leaving the cab. Designed for UTVs, overland rigs, and trail-ready vehicles, the Phoenix lineup offers three selectable Power Modes to optimize a vehicle's power system. Three interchangeable Lens Options, Spot, Drive, and Combo, provide precise beam customization to cover every area with purpose-built performance and RIGID-tough durability.Features: Peak Performance: The Phoenix XL 7" light pod features over 14,000 Lumens. Amber to White: Switch Between 5 color modes, allowing drivers to instantly switch between Cool White, Natural, Full Power, Warm, and Amber at the push of a button. No stopping and no leaving the cab. 3 Selectable Power Modes: The Phoenix lineup offers three selectable Power Modes to optimize a vehicle's power system with a magnet switch. Swappable Lens: Three interchangeable Lens Options, Spot, Drive, and Combo, provide precise beam customization to cover every area with purpose-built performance and RIGID touch durability. *Drive and Combo Lens sold separately. Cast Aluminum Housing: To withstand the most brutal off-road conditions. Deutsch Connector: For easy installation. Protective Bezel: Cast aluminum bezel designed for lens protection and aerodynamics. Fortified Against The Elements: IP68+ related - sealed from water and dust. Connectable Mounting Solution: Designed for modular light bar applications. Specifications: Size: 7" Light Shape: POD Mount Type: SURFACE MOUNT Beam Category: SPOT Voltage Range: 9V - 36V Raw Lumens: 14213 Watts: 191 Lux@10m: 2216 Beam Distance @ 1 LUX: 471 Beam Distance @ .25 LUX: 941 Peak Beam Intensity (cd): 221579 Horizontal Beam Angle: 20.0 Vertical Beam Angle: 18.8 Dimensions: 6.65" H x 6.8" W x 4.64" D, Weight 6.1 lbs HARNESS IS SOLD SEPARATELY ADDITIONAL SWAPPABLE LENS SOLD SEPARATELY What's In The Box? Light Stainless Steel U-Shape Bracket Mounting Hardware Deutsch Connector 1 Spot Lens

Read more less