Lighting - Accessories

Pico OHM Expansion ModuleThe Pico OHM modules make it easy to connect 4-wire RGB accessories to a standard 2-wire DC electrical system and control the color output through a Poco Digital Controller.Features: Connect RGB accessories to a standard 2-Wire DC electrical system 4 Modules in the pack RGB only (no RGBW) 12VDC ONLY (0.4A max current draw) No TTP (Timed Toggle Protocol) Lumitec Digital Controller (POCO) is required to control Pico OHM

Read more less

6-Channel Digital Switch Module Shadow-NET™ Control for Single Color & 3rd Party LightingThe 6-channel digital switch module offers a convenient way to integrate any standard light with the Shadow-Caster™ MFD interface. Simply plug in the module to the Shadow-NET™ system and switch support will automatically populate on the screen.Each module provides 6 channels of support, that will handle up to 10 amps per channel with digital fault protection. There is also a manual switch input for overriding the interface.Features: 6 independent digital switches Control other brands of lights with the Shadow-Caster™ MFD interface and phone app Digital over current fault protection Manual switch override Green/red LEDs provide the status of each channel Full integration with Shadow-NET™ interface The blue backlight indicates the power state Specifications: 12/24V operation 10A each channel 5/16” power lugs IP67 Deutsch connections Power lug protection boots What's Included? 6 channel digital power switch Mounting hardware 4 #8 PH x.5” Pre-wired mating connectors 3 year standard warranty Quick Guide (pdf)

Read more less

Dimmer ControllerMaybe Black Oak's lights are too bright? This dimmer module allows users to dim the LEDs down to 25%, 50%, and 75%. With the handheld remote control, users can easily turn the light on/off and dim it to a preferred brightness. Note that the dimmer module must be wired in between the relay and light to get full range of function.Specifications: Product Dimensions (L x W x H): 5” x 1.5” x 1.25” Input/Output Voltage: 12-24V Max Output Current: 25 Amps Controller Battery: CR2025-CR2032 In the Box: Dimmer module Wireless controller Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 6"L WT: 0.45 lbs UPC: 850044517329

Read more less

4-Piece Connect CableBlack Oak's 4-piece Connect Cable allows users to connect 4 lights under 30'' in length to one wiring harness, allowing all the lights to power on with one switch. This is a great wiring solution when upgrading fog lights to Black Oak's Pod Series lights. Just make sure to upgrade the fuse in the applicable wiring harness to the appropriate size.Users will want the fuse size to be just above the amp draw of the lights. For instance, if users are running 4 of Black Oak's 40w pods with a 2.8 amp draw each, bringing a total draw of 11.2 amps, you'll need a 15 amp fuse.*Sold as an Individual  Specifications: Type: Parts Box Dimensions: 1"H x 5"W x 7"L WT: 0.15 lbs UPC: 850044517435

Read more less

LightArmor All-Round Plug-In Light - 36"Premium LED lights with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles.  The subtle, glare-free black matte finish complements many of today's boat designs.The threaded locking collar fits securely with LightArmor Plug-In Light Bases. OEM Part Number 5530-36BP1Features: Impact-resistant polycarbonate lens Water-resistant Corrosion/UV resistant The light head adjusts 15° fore to 15° aft Over 50,000-hour life Technical Specifications: Visibility Distance - 2NM Visibility Field of View - 360° Vessel Size - Up to 39.4' (12 M) Connection - Standard 2-Pin Pole Length - 36" Operating Range - 10.5 to 14.4V DC Certifications:U.S.C.G.*Sold as an Individual Specifications: Type: Lights Box Dimensions: 3"H x 5"W x 42"L WT: 0.7 lbs UPC: 022697021564

Read more less

LightArmor All-Round Plug-In Light - 42"Premium LED lights with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles.  The subtle, glare-free black matte finish complements many of today's boat designs.The threaded locking collar fits securely with LightArmor Plug-In Light Bases. OEM Part Number 5530-42BP1Features: Impact-resistant polycarbonate lens Water-resistant Corrosion/UV resistant The light head adjusts 15° fore to 15° aft Over 50,000-hour life Technical Specifications: Visibility Distance - 2NM Visibility Field of View - 360° Vessel Size - Up to 39.4' (12 M) Connection - Standard 2-Pin Pole Length - 42" Operating Range - 10.5 to 14.4V DC Certifications:U.S.C.G.*Sold as an Individual 

Read more less

OceanDMX RC Explore XFM Dual 915MHzThe OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colours only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual Quick Guide (pdf)

Read more less

Poco Digital Lighting Control 3.0Poco Digital Lighting Control is a low-cost, easy-to-install, and set up onboard digital lighting control system that offers full dimming and color control over all your Lumitec PLI-enabled lights at the touch of a button via any compatible MFD or connected smart device. Poco 3.0 adds enhanced wireless security, an external API for compatibility with networked third-party automation systems, and a "Triggers" feature which allows for the triggering of Poco virtual switches by external inputs - all packaged within a responsive user interface for better mobile device usability.Features: PWR: Positive 10-30 VDC POCO supply power. Line must be fused prior to connecting to POCO with 3 Amp ATC blade fuse or equivalent (Constant ON or Switched with ACC Line) GRND: Negative 10-30 VDC POCO supply power ACC: Positive 10-30 VDC, Low current enable line to turn POCO on from remote device (i.e. MFD) (Must be powered to enable Poco) 1-4 IN: Channel Input power. Line must be fused prior to connecting to POCO with 10 Amp ATC blade fuse or equivalent (14 AWG 300V 16 inch long cable) 1-4 OUT: Channel Output power to the lighting circuit. Maximum 10 Amp load per channel. The maximum total load across all channels is limited to 40 Amps. Load on the channel must be only one of the following (Lumitec PLI enabled lighting/lighting capable of dimming (through PWM) / device requiring a standard ON-OFF circuit) (14 AWG 300V 16 inch long cable) LAN: Local Area Network connection. 10/100 Base T data connection to POCO. Standard CAT-5 cable with RJ45 connector required to plug into sealed network cable adapter. (18 inch long cable with Link light) POWER: Indicator - Illuminates Green if POCO is powered on, both PWR and ACC lines must have supply voltage between 10 and 30 VDC CH1-4: Indicator - Illuminates Red if power is supplied to Channel from fuse/breaker panel: - Illuminates Green if power is supplied to Channel input and the channel is turned on inside of POCO controller; PLI enabled lights may be OFF: - Flashes Orange if PLI data is transmitted: - Illuminates Orange if the channel is dimmed through a PWM signal. STATUS: Green blinking light indicates WiFi connection status: - 0 blinks: WiFi disabled - 1 blink: WiFi-enabled but not connected to any peers - 2 blinks: WiFi is connected to one or more peers Blue blinking light indicates Bluetooth-LE connection status: - 0 blinks: Bluetooth-LE is disabled - 1 blink: Bluetooth-LE enabled but not connected - 2 blinks: Bluetooth-LE is connected Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Adapt XE & XP Magnetic Reed Switch Power ClipThe RIGID Adapt XE Magnetic Reed power clip is used for additional power customization.  Leaving the switch in place limits the light to consuming a maximum of 2.7 amps.  When the switch is removed the light will consume up to 5.6 amps when all zones are activated on your Adapt XE LED dirt bike light.*Sold as an Individual Specifications: Type: Cables Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 815711018592

Read more less

Pico S-8 Expansion ModulePico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in. The Pico S8 module provides the ability to assign Poco virtual switch commands to physical mechanical switches (8 max). This means that your MFD can remain on a dedicated screen, or even be turned off, and a physical switch will activate the virtual switch command through the Poco module. Requires Poco 3 for compatibility (S8 module is not compatible with all earlier versions of the Poco module).

Read more less

Wedge Plate for GS-850 & GS-950In case your T-top has a slight curve, keep the appearance of your Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light clean by mounting them perfectly straight with our plastic wedge plates.Features: Corrects angle of GS-850 and GS-950 to perpendicular to the T-top  Fits Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light No drilling 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Converter Navimount for Lights with MagnetWorks with Navilights with magnet. Fits in any Navibolt-bracket. Specifications: Type: Mounting Brackets Housing: Black Box Dimensions: 2"H x 2"W x 5"L WT: 0.35 lbs UPC: 814154019012

Read more less