LightLink LL-101 Marine Dimming ModulePart #: LL-101Operation is simple! Press and hold the momentary switch to initiate dimming cycle. Dimming cycle continues to dim as long as switch is engaged, ranging from 100% to approximately 5% intensity holding 2 seconds at each position before dimming the opposite direction. Briefly press and release momentary switch for on/off operation.Specifications:
Input Voltage: 6-36 Volt DC
Dimensions: Width: 1.5" x Height: 0.5" x Depth: 1.0"
Features:
Compatible with i2Systems Apeiron, Ember and Profile lights
Dimming control via a momentary switch or contact
Small size, encapsulated, fits into most switch boxes
The LL-101 means that no matter what level you have the lights at when you turn them off, they will resume at full brightness when turned back on. The LightLink LL-101 is capable of dimming and controlling up to (20) i2Systems Fixtures, including:
Apeiron A1110
Apeiron A2162
Ember E1150
Profile P1100
(20') i2SystemsS-Line S1200 Specifications:
Type: Parts
Box Dimensions: 2"H x 4"W x 4"L WT: 0.4 lbs
Quick Guide (pdf)
Scan-Strip Light - 8" - BlueScan-Strip LED lighting is a quality product for marine or RV use.Features:
8 in. blue light in retail packaging
Mount this scan strip light under gunwales, in storage lockers, coolers, fish boxes, and engine rooms
Use the below deck in cabin areas for general lighting or courtesy lights
*The "P" within the part number indicates retail packaging Specifications:
Type: Lights
Box Dimensions: 1"H x 4"W x 10"L WT: 0.15 lbs
UPC: 786142413471
16" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features:
Switching off for more than 4 seconds resets the color to white
RGBW LEDs
Colors are daylight white (4000-4500K), blue, red, green
Lifespan 30,000+ Hours
12/24 Volt
IP65 can be installed in engine rooms and exterior locations
Ideal for under-gunwale lighting
SS Mounting Screws Included
Specifications:
Beam Angle: 120°
Watts: 2.4
Lumens: 180
Dimensions (L X W x H) (inch): 16" x 7/8" x 1/2"
*The "P" within the part number indicates retail packaging Specifications:
Type: Lights
Box Dimensions: 1"H x 4"W x 17"L WT: 0.2 lbs
UPC: 786142416519
E-Series Lens Cover 6" - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features:
Easy to Snap On & Off
Polycarbonate Plastic
Extra Layer of Protection
Light Commander Version 2 - 6-Zone Lighting Controller with Bluetooth/Wi-Fi, NMEA 2000 & HTML Ethernet ConnectivityDiscover the SHADOW-CASTER® Light Commander NMEA 2000, a pioneering solution in LED lighting control for boats. This first-of-its-kind product is crafted in compliance with the latest NMEA 2000 lighting control standards, ensuring enhanced lighting control, seamless marine system integration, and improved interoperability.Control up to 6 zones of lighting per module, including 4 zones of RGB or RGBW lights, with ease and precision. Explore, set, and store a variety of lighting scenes – from color change, fade, rotation, and strobe, through to music sync effects, offering versatility and customization to illuminate your boat like never before.Encased in durable IP67 housing with Deutsch-style IP67 connections, the Light Commander NMEA 2000 ensures reliability and performance in the marine environment. The backlit logo signifies the quality and innovation that SHADOW-CASTER® is renowned for.Elevate your marine lighting experience with the Light Commander NMEA 2000 – where technology meets functionality and style.Features:
NMEA 2000 Backbone or MFD Network Port Connectivity
Global control for all lighting
Up to 6 separate zones of lighting control – expandable to 12 or 18 by connecting additional SCM-LC-N2K modules
6 “Instant ON” switch inputs for enabling lights without MFD control
Supports RGB and RGBW lighting
Optional wireless connectivity for control from a mobile device (SCM-LC-PLUS-V2)
IP67 Water-resistant housing with waterproof connections
Deutsch style IP67 rated connections, for clean OEM installations
All in one design, no need for a separate MFD communication bridge
“Digitally fused” over current protection circuits, 15amps/channel (X4)
Backlit logo and zone indicator LEDs to indicate functions and operation
Built-in 3.5mm female audio port and microphone for music sync input
Multi-zone Lighting Controller for NMEA 2000 & Ethernet connectivity with integrated HTML interface
Specifications:
IP67 rated enclosure
Power: Supports over 600 watts of RGB lighting and virtually limitless Shadow-NET® connected modules
15 amps per RGB(W) zone, 60 amps max
10 to 30V input range
Direct 3.5mm female audio input for music synchronization
Music sync created by onboard DSP (Digital Signal Processing)
Digital power protection set at 15amps/channel
Built-in switch inputs for instant lighting for each zone
24-bit color support and gamma correction for universal color support
Enclosure: 8.9” (226mm ) x 4.75” (120mm) x 1.8” (46mm)
Quick Guide (pdf)Owner's Manual (pdf)
Attwood LightArmor Plug-In Base - 2 Pin - Black - RectangleINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features:
Threaded Locking System for a secure fit
Unique cover design Stays secure while underway or trailered
Low-profile prevents water from pooling on top surface
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
NaviLED PRO Deck Mount Adapter - WhiteThe NaviLED PRO series of navigation lamps have been the preferred choice of commercial and large recreational vessels for over a decade. The Horizontal Deck Mount Adapter accessory increases the installation flexibility of the NaviLED PRO range. Now the lamps can be mounted on horizontal surfaces, expanding the mounting options and catering to customers with larger vessels.Features:
Mount NaviLED PRO lamps on horizontal surfaces
Fits existing product range including Port, Starboard, Stern, Masthead, Bi-color
Increases physical dimensions for larger vessels
Innovative design hides fastenings
Space for cable gland beneath the adapter
UV and impact resistant material
In addition to the increased mounting configurations, large vessels often prefer a larger fitting to match proportionately with the size of the boat. This adapter increases the physical appearance of the lamp by 50%.The Horizontal Deck Mount Adapter is ideal when retrofitting old incandescent lamps that were often deck-mounted designs, and caters for both rear and bottom exit cabling.The option of either black or white matches the NaviLED Pro offerings to complement the installed appearance.*Please note: Lamp is not supplied with the Adapter Specifications:
Type: Adapters
Box Dimensions: 4"H x 6"W x 11"L WT: 0.5 lbs
UPC: 9416325247876
1M Plastic Track for SCM-AL-LED StripsShadow-Caster LED Strip Mounting Track provides mounting options for Shadow-Caster Accent Lighting strips.Features:
1M plastic snap-in with 2x mounting screws included
1M length
2x mounting screws included
Compatible with SCM-AL-NEON and SCM-AL-LED
Quick Guide (pdf)
Adapt Lens Cover 10" - BlackThese ADAPT Light Covers from RIGID are the perfect solution for style and function. With multiple color options, you can give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your ADAPT light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features:
Easy to Snap On & Off
Polycarbonate Plastic
Extra Layer of Protection
Apelo Light ControllerControl, Group, and Create personalised dynamic RGB/W lighting experiences with the Apelo Light Controller. Configure any Apelo Ecosystem RGB lamp or light via the Apelo Light Controller App and/or multi-pole switching.Elevate your lighting experience with the Hella Marine Apelo Light Controller. Vibrant, dynamic, synchronized colors will transform your space into a stunning visual display.The Apelo Light Controller App lets you personalise your lighting configuration with ease. Download the Apelo App and pair Apelo RGB Step lamps, Apelo EuroLED 75 RGB/W Downlights, and Apelo Underwater Lights to the controller to enhance your lighting experience. Also compatible with universal RGB products such as rope lighting.Customizable LightingPersonalize your lighting with the Apelo Light Controller App and unlock endless color possibilities. Easily create custom lighting or switch between preset modes, combining convenience and creativity in every use.Effortless ControlSeamlessly move between a multi-pole switch and the intuitive Apelo App to control your lighting. Bluetooth mesh technology allows seamless integration of multiple devices without having to connect them together.Mesh CommunicationNo wiring required for controller integration – the units communicate wirelessly. Once paired, instructions are seamlessly transmitted between controllers via over-the-air communication.Specifications:
UV Resistant
IP67 Completely Sealed
12V/24V
RGB/W
3-Year Warranty
Quick Guide (pdf)Owner's Manual (pdf)
Wireless Dash Mount Remote for RCL85 & RCL95 SearchlightBlack Dash Mount Wireless Remote for RCL85 & RCL95 Searchlights. Enjoy the convenience of controlling your RCL85 or RCL95 searchlight with the Wireless Dash Mount Remote. The compact form factor and the sleek design of this remote ensure a visually appealing look when the remote is dash-mounted. It operates on the 433.92 MHz frequency and offers an impressive remote operation distance of 213' (65M).Features:
Sleek design and compact form factor
Impressive remote operation distance of 213' (65M)
Allows for directional control and provides the ability to switch rotation/tilt speed between fast and slow
The simple searchlight sync process
Sync up to 4 remotes with one searchlight
USCG Approved FCC CE
Specifications:
Dimensions: 3.98" L x 2.36" W x 0.71" H
Housing Color: Black
Mount Type: Dash Mount
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.