OceanConnect Junction BoxThe OceanConnect is a waterproof (IP66) DMX-controlled, low-voltage DC (9–32V) junction box.The OceanConnect provides one power unit and four individually switched fused power outputs (6 amps per output) to connect DC-powered lights or other DC-switched units. The unit also supports powering and individual addressing of up to four DMX-controlled OceanLED X-Series lights. Contents:
1x OceanConnect unit, including 4x 7.5A blade fuses
4x mounting screws
1x twin entry cable grommet
4x blanking plugs
Specifications:
Voltage: 12/24V DC (max 32V DC)
Input/Output Cable Glands: 1x M20-Power In, 4x M16 - DMX In/Out, and Lights Out
Power Input Terminals Wire Gauge: 8-20 AWG
DMX In/Out, and Lights Out Terminals Wire Gauge: 12-28 AWG
Light Outputs: DMX & Power- 4 x individual fused 6 Amp each max
DMX Input: 1x DMX Input (to connect the DMX controller)
DMX Output: 1x DMX Output (to link junction boxes in the chain)
DMX Terminator: Onboard DMX terminator with an on/off switch
Physical Specifications
Dimensions (Including Cable Glands): 228mm x 174mm x 60mm (9" x 6.8" x 2.3")
Enclosure: IP66-robust polycarbonate
Weight: 270g
Snap-On Rockguard Lens Cover for GT Series Halogen Lights - BlackSnap-on Rockguard lens cover for halogen units. This is not a universal part. Please verify the model number listed before ordering.Compatible With Current Golight GT Models:
2000GT
2051GT
2020GT
2021GT
2007GT
2057GT
7901GT
7951GT
7900GT
Previous Golight/Radioray Models:
2000
2051
2020
2021
2007
2057
7901
7951
7900
5149
4.5" Nav Light Riser for LL53 Nav Fixture SeriesRaises navigation light for better detection. Made of pure aluminum, anodized black.Features:
Increases height 4.5 inches
Cable routes through bottom or side
LL53 fixture can mount 0° or 90° on top
Lighted Rocker SwitchThis Switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID Industries lighting system. This switch will fit all RIGID Industries wiring harnesses. This product requires a 3/4" hole to mount.Features:
Lighted for Better Visibility
Water Resistant
Protective Rubber Boot
Works with All RIGID Industries Wiring Harnesses
Wedge Plate for GS-800 & GS-900In case your T-top has a slight curve, keep the appearance of your Grand Slam 800 VHF Antenna Mount and Grand Slam 900 Masthead Anchor Light clean by mounting them perfectly straight with our plastic wedge plates. Features & Benefits:
Corrects the angle of GS-800 and GS-900 to perpendicular to the T-top
Fits Grand Slam 800 VHF Antenna Mount and Grand Slam 900 Masthead Anchor Light
No drilling
Sold individually
1-year limited warranty
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Type: Wedges
Box Dimensions: 1"H x 4"W x 4"L WT: 0.25 lbs
UPC: 631115091111
Downlight - White Housing - Bimini BlueThis Shadow-Caster™ large marine LED downlight is bimini blue and is perfect for lighting overhead areas of the interior and exterior of your boat or yacht. At 3" overall diameter, its wide-angle spread of light and all-glass reveal make this the ideal light for T-Tops, cabins, towers, and more.Features:
LED color is bimini blue
120-degree viewing angle
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
All-Glass reveal provides a modern look
White finish
Durable glass lens
3-Year Warranty
Specifications:120-degree beam angle
3-watt power draw
10-30 volts input
250mA at 12 volts, 125mA at 24 volts
6000 Kelvin cool white color temperature
3000 Kelvin warm white color temperature
3 in. (76mm) OD, 0.175 in. (4mm) mounting height
2 in. (51mm) mounting hole
IP67 waterproof design
18 in. (45cm) lead wire
Includes:
Down light
Flush mounting bracket
(3) #4 X 0.5 in. (12.7mm) SS316PH screws
Specifications:
Type: Lights
Box Dimensions: 3"H x 4"W x 4"L WT: 0.25 lbs
UPC: 850024342866
Quick Guide (pdf)
Light SaverA convenient way to hold your running lights. 2 straps with the foam inserts create a tie-down system that can be mounted anywhere and keep your running lights secure.
Navimount Vertical White with ScrewsIncludes:2 self-tapping stainless steel screwsUse #960 converter for #001, 010, 305 and 341 lights. #950 replaces old #526 Specifications:
Housing: White
Type: Mounting Brackets
Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs
UPC: 7332640013922
Dash Mount Point Pad™Controller for RCL-95 Searchlight Add a surface mounted a 2nd searchlight controller with ACR's Dash Mount Point Pad™. Surface mounted and allows you to turn the searchlight on and off, change the rotation speed between high and low, and rotate the searchlight left and right, and to raise and lower the searchlight beam. *Does not include extension cable*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Parts
Box Dimensions: 5"H x 6"W x 7"L WT: 1.35 lbs
UPC: 791659096376
Owner's Manual (pdf)
Dimmer ControllerMaybe Black Oak's lights are too bright? This dimmer module allows users to dim the LEDs down to 25%, 50%, and 75%. With the handheld remote control, users can easily turn the light on/off and dim it to a preferred brightness. Note that the dimmer module must be wired in between the relay and light to get full range of function.Specifications:
Product Dimensions (L x W x H): 5” x 1.5” x 1.25”
Input/Output Voltage: 12-24V
Max Output Current: 25 Amps
Controller Battery: CR2025-CR2032
In the Box:
Dimmer module
Wireless controller
Specifications:
Type: Parts
Box Dimensions: 2"H x 3"W x 6"L WT: 0.45 lbs
UPC: 850044517329
E-Series Lens Cover 6" - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features:
Easy to Snap On & Off
Polycarbonate Plastic
Extra Layer of Protection