Lighting - Flood/Spreader Lights

Docking, Hull, Back-Up LED Lights - ChromeFeatures: Sold as a Pair Operates 12 Volt DC Systems Draws 4 Amps Each Sealed Built-in Rear Heat Sink Thermal Insulated Wires Pyrex Optical Lens LED Lamp Assembly Removable Lens Cover Water Tight Gaskets Included 7.60" x 4.15" x 3.75" Specifications: Bulb Watts: 7w LED: Yes Voltage - Input Range (Volts): 12v Box Dimensions: 5"H x 6"W x 8"L WT: 2.3 lbs UPC: 601373580023

Read more less

LED Docking Light- Mirrored Stainless Steel - PairFeatures: Operates 9-16 Volts Smart Driver Technology Senses Voltage Fluctuations Rated at 50,000 Hours Service Life Shock and Vibration Proof Corrosion Resistant and Waterproof Two high-power LED front lights and eight LED sidelights that operate independently of each other Total light spread of 160 degrees Stainless Steel mounting screws included for rust proof installation Installation only requires a 1/2" hole Made in the USA Specifications:Dimensions: 9.75" L x 5" W x 1" H Specifications: Voltage - Input Range (Volts): 9-16v LED: Yes Box Dimensions: 3"H x 10"W x 12"L WT: 1.7 lbs UPC: 601373580221

Read more less

ML-2 LED Combination Deck/Steaming LightThis top selling light has been completely retooled to provide better access for bulb replacement. At the same time, the deck light/bulb assembly has been greatly improved with a prismatic reflector for enhanced deck illumination.Features: Steaming Light meets Coast Guard requirements for yachts up to 65' LOA Separate Switching 10 Watt Boy Light Bulb is easily replaceable (WN-211).8 amps Deck Light features identical to ML-1 Provided with 6” of triple-lead wire Weighs 7 oz – measure 5 ¾” vertically Molded body Available in black finish only Mast Light Chafe Guard will also work with Aqua Signal model 254047-7 combo light Replacement bottom ring for NL-1 & 2. Top bulb ML-2 Bottom Bulb ML-1 & 2. Top Clear Lens, ML-2 only.

Read more less

100W Above-Water LED Floodlight 120V - GreenAttract Instead of Chasing.The FL100G delivers the concentrated fish-attracting power you need. This premium above-water LED floodlight features our signature IntensiTech LEDs arranged in a focused square pattern, creating intense illumination that penetrates deep into the water column to trigger the feeding chain that brings fish to you.Features: Precision 30° beam angle – concentrated light penetration for maximum fish attraction IP66 waterproof rating – engineered to withstand marine environments Plug-and-play 120VAC – simple installation, immediate results Elevated mounting design – perfect for maintenance-free enjoyment Professional-grade IntensiTech LEDs – unmatched intensity that fish recognize and react to The FL100G transforms any dock into a prime fishing spot. By directing concentrated light deep into the water, it stimulates the micro flora that bait fish feed on, creating the feeding frenzy that attracts predator fish. The focused beam design ensures maximum light intensity reaches the water, making it the ideal choice for anglers fishing from high docks or piers.Turn your dock into a fish magnet – Experience the HydroGlow difference.Specifications: Voltage 120VAC with 10-foot cord Current Draw 3.5A Wattage 50W Beam Angle 30 degrees Lumen Output: 5,000 total lumen output Length 11.5” Width 8.5” Weight: 6 lbs 316 stainless steel mounting bracket and hardware included Specifications: Bulb Watts: 100 LED: Yes Voltage - Input Range (Volts): 120 Box Dimensions: 2"H x 11"W x 13"L WT: 3.4 lbs

Read more less

SCM-SL Series Bracket Mount Spreader Light - White Housing - WhiteThe Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

Read more less

E-Series PRO 6" Flood LED - BlackThe E-Series is one of RIGID's most versatile, all-around lighting solutions, and recent enhancements in LED technology delivering up to 111% more raw lumens than ever before with the E-Series PRO. Among RIGID's most popular product lines, the E-Series PRO has recently benefited from several upgrades to improve both looks and performance. Plus, new branding and new blacked-out circuit boards give the E-Series PRO a more refined look. Available with your choice of optics, the E-Series features a host of beam options, including Spot, Flood, Driving, Hyperspot, Diffused, and new Driving/Spot and Spot/Hyperspot combinations. These and other innovations make it one of the brightest and most efficient LED light bars on the market. The E-Series was born in off-road, but its versatility makes it well suited for use with power sports, marine, general automotive and even first responder applications.2-Piece Housing - This LED Light Bar now features a 2-piece housing that is stronger, more durable and features an improved cooling system. 2-Piece housing are Torture Tested & Approved! With user serviceable mounting hardware and additional mounting bosses on the bottom and an integrated deutsch/amp plug, it makes this new 2-piece housing a more reliable sealing surface for you LED Light Bar.Features: Optics: Hybrid - Flood LED Color: Color: White Finish Color: Black Length: 6" Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.84 lb Sold As: Single Hybrid Optics 20° Flood Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Specifications: Watts: 80 Amp Draw: 5.71 LED's: 12 Raw Lumens: 9504 Lux @ 10m: 166.16 Beam Distance: 128.9 m Peak Beam Intensity: 16,616 cd Specifications: LED: Yes Bulb Watts: 80w Box Dimensions: 7"H x 7"W x 9"L WT: 4.8 lbs UPC: 849774028885 Brochure (pdf)

Read more less

High Intensity Outdoor Dimmable LED Spreader Light - WhiteLunasea Spreader offers 1,000 lumens of lights and focuses it from bow to stern.A spreader light that delivers. Designed for distance, engineered for quality. Using two of the brightest single point light source LED's married with a lens, Lunasea puts the light where you want it - On your boat deck! Most spreader lights cast a large quantity of light outside your boat while other spreaders focus their little intensity on small areas. If polarity is swapped on the power, the light dims down which is ideal for a beautiful night sipping on a cocktail. All this while only drawing 11 watts of power."Features: IP67 rated 3 different mounting positions 1,100 lumens of light White Specifications: Voltage - Input Range (Volts): 10-40v Bulb Watts: 11w LED: Yes Box Dimensions: 1"H x 9"W x 9"L WT: 0.76 lbs UPC: 855748005387 Quick Guide (pdf)Brochure (pdf)

Read more less

Flush Mount Spreader Light - BlackThe third-generation flush-mounted spreader light features five 3-watt LEDs to provide plenty of illumination. Composite trim ring snaps over housing for a finished look.  Mounts with two screws, concealed by the trim ring, on either side of the fixture. This latest version adds one more LED for a total of 5. The redesign still allows this updated model to fit in the same cut-out as the older models, to make upgrades easy.Features:   12/24 V - 12 W Polycarbonate Lens UV Resistant Hidden Mounting Screws Cool white LED color (5,500 - 6,300K) Temperature of LED: less than 158° with 77° ambient temperature Five 3 Watt Samsung 3535 LEDs 1,000 Lumens Equivalent to 120 Watt Halogen bulbs LED Lifetime: 50,000 Hours LED Beam angle: 110° 0.8 Amp draw at 12 Volt IP68 Fits the previous cutout Dimensions: 6” W x 2-1/2” H x 1-3/4” D Cutout: 4-1/2” W x 1-1/2” H

Read more less

4" Marine Spreader Light - Flood Optics - White Housing - Pro Series 3.0Black Oak 4" Marine Spreader Light Flood Scene - White Housing - Pro Series 3.0Designed and tested at a big name boat builder next door to Black Oak in Sarasota, Florida, this 4" spreader is perfect for those die-hard fishermen who love those late nights and early mornings. With a whopping 3,120 raw lumens, users no longer have to worry about rigging rods in complete darkness. This version has a 120° throw, much wider than the 45° throw of Black Oak's standard flood version. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Flood optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader light (bow/stern) Aft deck fishing lights    Foredeck lights Overheard lighting (marine/non-marine use) Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Width x Height): 5" x 2.13" x 2.15”  In the Box: Marine spreader light (1) Wiring pigtail with 2-pin waterproof deutsch connector  Mounting hardware required to install *Sold as an Individual Specifications: Bulb Watts: 20 LED: Yes Box Dimensions: 5"H x 5"W x 7"L WT: 1.2 lbs UPC: 850044517275

Read more less

10W Slimline LED Floodlight, 120VAC Only, Cool White, 1200 Lumens, 3' Cord - White HousingLunasea LED food light is both bright and ultra thin. Available in both 12W and 35W. Sleek design It's anywhere while offering bright soft light output with a color rendering of >80CRI. Beam angle of 110 degree great for area lighting. Includes Stainless Bracket and Hardware, Tempered Glass, Breather Valve, completely sealed without the use of gaskets. Bright meets beautiful. Specifications: Power: 12W Voltage Range: 120VAC (108-132VAC - 60Hz) Output: 1200 Lumen, 4000K, >80CRI Dimensions: 130 (5.1”) W x 91 (3.6”) H x 28 (1.1”) D Specifications: Bulb Watts: 12w Voltage - Input Range (Volts): 108-132v LED: Yes Box Dimensions: 2"H x 7"W x 10"L WT: 1.1 lbs UPC: 850001461047 Brochure (pdf)

Read more less

Sea Hawk-XLR LED Floodlight - White LED/White HousingNext level technology offering incredible intensityOur brightest Sea Hawk to date!1300 lumens of crisp, white, darkness-busting illumination with all the proven Sea Hawk durability and efficiency advantages.Engineered light patternsAdvanced optical systems deliver incredible illumination without glare. Spread lamps illuminate a wide, close-range spread over a cockpit, foredeck or working area. Spot lamps provide a narrower, more concentrated illumination for tuna towers, masts or for forward facing lighting on a variety of applications.Unique Corrosion Proof HousingSea Hawk XLR housings are precision injection molded from thermally conductive ceramic polymer. This advanced material draws heat from internal electronics for reliable long-term operation and eliminates the need for an aluminium housing in this class of floodlight, removing corrosion risks in the harsh marine environment.Integrated DimmingBuilt-in convenience of switching between High level full intensity and low level dimmed output.Multivolt 9-33V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Specifications: Housing Description: ‘Non metal’ thermally conductive polymer housing Lens Material: Grilamid Bracket: Polished 316 stainless steel Color Temperature: 5000K (White) Cable: Pre-wired with 0.5M of triple core marine cable Operating Voltage: Multivolt™ 9-33V DC Degree of Protection: IP 67 - Completely Sealed High Power Consumption: 18W (<1.5A@12V / <0.75A@24V) Low Power Consumption: 2W (<0.17A@12V / <0.08A@24V) Weight: 450g (including cable) Light Output: 1300 lumens (White) Approvals: CE, RCM Manufactured In: New Zealand Specifications: Voltage - Input Range (Volts): 9-33v LED: Yes Box Dimensions: 3"H x 7"W x 9"L WT: 1.3 lbs UPC: 9416325233398 Brochure (pdf)

Read more less

D-Series PRO Hybrid-Diffused LED - Pair - WhiteThe D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.Features: Optics: Hybrid-Diffused Color: White Finish Color: White Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.3lb Sold As: Pair Hybrid Optics 60° Diffused Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Sealed Deutsch Connector Specifications: Watts: 30 Amp Draw: 2.14 LED's: 4 Raw Lumens: 3168 Lux @ 10M: 20.6 Beam Distance: 45.4M Peak Beam Intensity: 2060 cd Specifications: Bulb Watts: 30w LED: Yes Box Dimensions: 6"H x 7"W x 9"L WT: 4.1 lbs UPC: 849774027277 Brochure (pdf)

Read more less