Lighting - Interior / Courtesy Light

Waterproof IP68 LED Strip Lights - Blue - 5MThese LED strip lights provide excellent lighting, Silicone filled (not epoxy) for extensive UV protection.LED Strip Lighting offers the perfect solution to creating energy efficient,stylish task, accent and mood lighting. Strip lights are discreet, flexible, can be cut to size and they can be mounted virtually anywhere.IP20 for indoors and IP68 rated with extensive UV protection for outdoors makes these strip LED’s perfect for boating applications. Add one of the optional controllers and produce multiple colors, control brightness and create special effects.Features: 120 Degree Viewing Angle Efficient high output LED’s Works well in Marine, Auto and Home Applications Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Clear LED Color: Blue Dimming: No Box Dimensions: 2"H x 8"W x 9"L WT: 1.04 lbs UPC: 855748005196 Quick Guide (pdf)

Read more less

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - Stainless Steel Bezel - 12VAttractive, energy efficient lighting for interior and exterior use.Hella Marine round LED courtesy lamps can be installed almost anywhere on board.Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer. Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable) Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Stainless LED Color: White Dimming: No Box Dimensions: 2"H x 4"W x 8"L WT: 0.23 lbs UPC: 9416325177616

Read more less

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - White Plastic Bezel - 12VAttractive, energy efficient lighting for interior and exterior use.Hella Marine round LED courtesy lamps can be installed almost anywhere on board.Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer. Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable) Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: White LED Color: White Dimming: No Box Dimensions: 2"H x 4"W x 8"L WT: 0.22 lbs UPC: 9416325177807

Read more less

3 LED Surface Mount Step Light - White with Black CaseFeatures: Operates 9-16 Volt DC Systems 24 Volt Version Available Rated @ 100,000 Hours of Service Life Shock and Vibration Proof Cool to the Touch Energy Draw 26 Milliamps No Corrosion Potted to Seal Out Moisture 3 LEDs 1.69" x .65" x .40"  Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Black LED Color: White Dimming: No Box Dimensions: 1"H x 4"W x 6"L WT: 0.1 lbs UPC: 601373135070

Read more less

Surface Strip Light w/Switch - White/Red LEDs - 12VThe Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: White LED Color: White/Red Dimming: No Box Dimensions: 1"H x 4"W x 13"L WT: 0.3 lbs UPC: 9416325240754 Brochure (pdf)

Read more less

Oak Rock Accent Light - Red LEDs - White HousingLight up a console, compartments, under-gunnels, and much more with Black Oak's IP69K rated marine accent lights! This small yet powerful light has LEDs that are sure to provide users with the lighting needed while on the water. Features: Red LEDs Activities & Uses:  Accent lighting Compartment lighting Map lighting Trailer lighting Console lighting Under-gunnel lighting Technical Specifications: Total Wattage: 9W Amp. Draw: 0.35 LED Quantity: 3 Weight: 0.35 lbs. Raw Lumens: 220 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Width): 2-3/4" x 1-1/2" x 3/8”  Hole to Hole Distance: 2" In the Box: (1) Accent light with positive and negative lead (1) Rubber mounting pad (1) Stainless steel screw kit *Sold as an Individual Specifications: Bulb Type: LED Dimming: Yes Housing: White LED Color: Red Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 4"W x 4"L WT: 0.35 lbs UPC: 850044517251

Read more less

LED Alcor Courtesy Light - BlueLED Alcor Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-1/2” diameter round light with one LED bulb can be mounted to cast light down, up, or to the side, depending on the required application. Available in blue or white. 12V.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Stainless LED Color: Blue Dimming: No Box Dimensions: 2"H x 4"W x 6"L WT: 0.15 lbs UPC: 035514404686

Read more less

Stainless Steel Dome Light - 5" Lens These Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with an integral on/off toggle switch and an 18.4 watt DC double contact bayonet bulb. Can be converted to LED with a bayonet bulb socket adapter (442042-1) BA15D style base and G4 bulb (sold separately). Surface mounts with three RH fasteners (not included). 12VDC.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Stainless LED Color: White Dimming: No Box Dimensions: 2"H x 8"W x 12"L WT: 0.6 lbs UPC: 035514400350

Read more less

LED Pop-Up Table Light - 5" - ClosedLED Pop-Up Table Light is available in 2-3/4" and 5-1/2" pop-up heights. It automatically switches on with a simple twist of the cap, allowing the light to pop up, ready to use. Push the cap down, twist it to lock, and the light switches off and disappears into a table or deck. Can be used with an LED Touch Dimmer Switch (403061-1). Cap and bezel constructed of corrosion-resistant investment cast 316 stainless steel. Installs with #10 FH fasteners (included). Produces 500 lumens. 12-24VDC. IP67 waterproof rating. CE certified. Specifications: Bulb Type: LED Box Dimensions: 5"H x 5"W x 5"L WT: 1.4 lbs UPC: 035514405133

Read more less

Brass Berth Light - Small This Birth Light is constructed of machined and stamped brass and a lacquer coating to prevent tarnish with solid brass knurled adjusting knobs. The interior surface of the lamp shade is white enamel to reflect more light. Prewired with integral on/off switch. Includes a 15-watt DC double contact bayonet style bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA150 style base and G4 bulb (sold separately). Designed for bulkhead or wall mounting. Installs with three #6 RH fasteners (not included). 12VDC.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12v Housing: Brass LED Color: White Dimming: No Box Dimensions: 3"H x 8"W x 12"L WT: 0.6 lbs UPC: 035514400282

Read more less

L.E.D. Utility Light with Snap on Front CoverConstructionWhite Molded Plastic Snap-On Front Cover Conceals Mounting Screws Diffusion Lens Flush Mounting Easy Installation12 Volt L.E.D.Uses less than half the energy draw or standard lights supplied with 7" pig tail wire leads Specifications: Dimming: No Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: White LED Color: White Box Dimensions: 2"H x 3"W x 6"L WT: 0.09 lbs UPC: 085226350832

Read more less

Ember E1150Z Snap-In - Polished Chrome - Round  - Cool White LightProduct Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24v Housing: Chrome LED Color: Cool White Dimming: Yes Box Dimensions: 3"H x 3"W x 3"L WT: 0.2 lbs Brochure (pdf)

Read more less