Lighting - Navigation Lights
Hella Marine NaviLED Port & Starboard Pair - 2nm - Clear Lens/White Housing [980520911]
NaviLED Port & Starboard Pair - 2nm - Clear Lens/White HousingCompact LED navigation lamps. Attractive, power-saving, and ultra-reliable. Designed and manufactured in New Zealand, NaviLED® lamps save power on board and provide outstanding durability.Ultra-low current drawNaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined!No bulbs, No maintenance, ultra-long service lifeHella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration-proof for proven reliability and safety in demanding conditions.Multivolt™ 9-33V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Fully sealed for life. IP 67 certifiedEach NaviLED® lamp is a completely sealed unit. High-impact housings ensure durability from waves and impact.Pre-wired with Marine CableSingle-core (120mm) or twin-core (2.5m) sheathed marine cable assemblies available. Ensures time-saving, completely sealed installations.Specifications: Material Description: UV-resistant, enhanced impact-resistant acrylic lens High-impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with marine cable Operating Voltage: Multivolt™ 9-33V DC (earlier version 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 60g (with 120mm cable version) Approvals: IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ Specifications: Lens Color: Red/Green Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 2"H x 4"W x 8"L WT: 0.4 lbs UPC: 9416325196570 Quick Guide (pdf)
$220.00$133.50
Hella Marine NaviLED Deck Mount Port & Starboard Pair - 2nm - Clear Lens/White Housing [980620911]
NaviLED Deck Mount Port & Starboard Pair - 2nm - Clear Lens/White HousingCompact deck mount LED navigation lamps. Attractive, power saving and ultra reliable.Ultra low current drawNaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined!No bulbs, No maintenance, Ultra long service lifeHella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions.Multivolt™ 8-28V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Safe and highly visibleHella marine optics deliver 100% correct light output and enhanced visibility compared to bulb navigation lamps.Fully sealed for life. IP 67 certifiedEach NaviLED® lamp is a completely sealed unit. High impact housings ensure durability from waves and impact.Specifications: Material Description: UV resistant, enhanced impact resistant acrylic lens High impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with 500mm of twin core marine cable Operating Voltage: Multivolt 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Port and Starboard less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 75g (including cable) Approvals: IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ Specifications: Lens Color: Red/Green Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 3"H x 6"W x 9"L WT: 0.5 lbs UPC: 9416325202288
$253.33$153.50
Hella Marine Port Navigation Light - Incandescent - 2nm - Black Housing - 12V [002984335]
Port Navigation Light - Incandescent - 2nm - Black Housing - 12VInternationally approved navigation lamps. Non-magnetic and saltwater resistant. Housing 'snaps' to base without screws.2984 series navigation lamps feature a vertically hanging bulb and contacts in the upper area of each lamp to prevent corrosion.Specifications: Material Description: UV and impact resistant plastic housing and lens Minimum Visible Distance: 2 Nautical Mile Bulb: 12V / 25W BAY15d included Installation: Vertical surface mount Cable Entry: Through base plate with rubber grommet Degree of Protection: IP 55 Approvals: IMO Col Reg 72, USCG, ABYC A-16, Maritime NZ Specifications: Lens Color: Red Visible Range (Miles): 2nm Housing: Black Voltage - Input Range (Volts): 12v LED: No Box Dimensions: 4"H x 6"W x 8"L WT: 0.8 lbs UPC: 9002920130547
$68.89$49.50
Navisafe Navilight 2NM Tricolor w/Navimount Base Rail Mount - White [340KIT3]
Navilight 2NM Tricolor w/Navimount Base & Rail Mount - WhiteNavimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount Base lights include a U-Bracket and Navibolt-bracket.Features: Tricolor Masthead light 135° white, 112.5° red, 112.5° green with 12 hour burn time BiColor side light with 20 hour burn time Red side light with 38 hour burn time Green side light with 38 hour burn time White Sternlight with 32 hour burn time Navimount RAIL Mount - White The Navimount RAIL mount is designed to attach the Navilights with Magnetic base, Navimount base or Suction base onto any 25 or 35mm / 1" or 1-1/4" rail. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: White/Red/Green Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) LED: Yes Box Dimensions: 3"H x 3"W x 5"L WT: 0.6 lbs
$136.99$92.50
Navisafe Navilight 360 2NM White w/Navimount Base RIB Mount - White [040KIT4]
Navilight 360° 2NM White w/Navimount Base & RIB Mount - White Navimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount base lights include a U-Bracket and Navibolt-bracket.Features: 360° All-round/Anchor light with 15 hour burn time 225° Masthead light with 24 hour burn time 135° Sternlight with 32 hour burn time Safety/Flashing light with 85 hour burn time Cabin/Courtesy light with 72 hour burn time Navimount RIB - White The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly Includes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: White Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) LED: Yes Box Dimensions: 2"H x 3"W x 5"L WT: 0.6 lbs
$125.99$84.50
Lopolight Combined Sidelight - 2NM - Silver Housing w/FB Base [201-003-FB]
Combined Sidelight - 2NM - Silver Housing with FB BaseThis silver sidelight is horizontally mounted and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.Features: Silver anodized aluminum housing 0.75m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438043282 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: Red and green Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 2.5 meters shielded marine grade cable and installation guide Materials: Silver anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68 Connection: 2.5m cable Current Consumption (mA @ 24VDC): 90 Current Consumption (mA @ 12VDC): 163 Dimensions Metric: Ø92.5mm x 36mm Dimensions Imperial: Ø3.6" x 1.4" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 2.2 Vessel Size: Under 12 meters Specifications: Housing: Silver Lens Color: Red/Green Visible Range (Miles): 2NM Voltage - Input Range (Volts): 10 - 32 Box Dimensions: 4"H x 4"W x 4"L WT: 1.4 lbs UPC: 879343043414 Quick Guide (pdf)
$475.63
TACO Red Replacement LED f/Rub Rail Lights F38-6602-1, F38-6602-2, F38-6800D F38-6810B [F38-6000-R]
Red Replacement LED for Rub Rail Lights F38-6602-1, F38-6602-2, F38-6800D & F38-6810BSpecifically for Rub Rail Lights F38-6602-1, F38-6602-2, F38-6800D and F38-6810B.Replacement Navigation Lights for Rub Rail-Mounted: F38-6602-1 F38-6602-2 F38-6800D F38-6810B *Sold IndividuallyThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
$32.99$29.50
Sea-Dog Combination Bow Light - Injection Molded Polycarbonate/Stamped Stainless Steel [400005-1]
Combination Bow Light - Injection Molded Polycarbonate/Stamped Stainless Steel This Combination Bow Light is for replacement of existing lighting (not for new construction). Constructed of injection molded polycarbonate with stamped stainless steel. These navigation lights do not meet the USCG 33 CFR 183.810/ABYC standard A-16 from 2016, but can be used as replacement lights on vessels manufactured before 11/1/2003. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Housing: Black Lens Color: Red/Green Voltage - Input Range (Volts): 12v Box Dimensions: 3"H x 5"W x 7"L WT: 0.3 lbs UPC: 035514400268 Quick Guide (pdf)
$29.95$24.50
Sea-Dog Stainless Steel Rectangular Transom Light [400136-1]
Stainless Steel Rectangular Transom Light Rectangular Transom Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with two #10 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Housing: Stainless Lens Color: White Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12v LED: No Box Dimensions: 1"H x 6"W x 9"L WT: 0.35 lbs UPC: 035514400749
$39.95$31.50
Sea-Dog Combination Bow Light [400155-1]
Combination Bow LightCombination Bow Light is for replacement of existing lighting (not for new construction). Constructed of die cast chrome zinc. Lens can be reversed for under mounting. Installs with two #10 FH fasteners (not included). Recommended for fresh water use. These navigation lights do not meet the USCG 33 CFR 183.810/ABYC standard A-16 from 2016, but do meet the USCG 33 CFR/ABYC A-16 from 1997. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Housing: Stainless Lens Color: Red/Green Visible Range (Miles): 1nm Box Dimensions: 2"H x 4"W x 8"L WT: 0.5 lbs UPC: 035514400626 Quick Guide (pdf)
$24.50$21.50
Attwood Pulsar Bi-Color 2-Pin Stowaway Light - 10"Angled [5091-10-7]
Pulsar Bi-Color 2-Pin Stowaway Light - 10"AngledAttwood offers a variety of durable, stowaway, combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above trolling motors, anchors, or other equipment on the bow. When not in use, lights can be removed from the base and stowed, so they won’t interfere with fishing or anchoring.Features: 1-mile, 225° light visibility for boats up to 39.4 ft. (12 m) Includes 9W wedge base lamp 2-Pin Locking-Collar Pole Specifications:Pole Length: (inch) 10" Angled*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications: Lens Color: Red/Green Visible Range (Miles): 1 Box Dimensions: 3"H x 6"W x 17"L WT: 0.35 lbs UPC: 022697911070 Quick Guide (pdf)
$34.99$28.50
Lunasea Rechargeable Tri-Color Portable Navigation Light w/RailBlaza Quikport Mount - Black [LLB-72BK-UB-01]
Rechargeable Tri-Color Portable Navigation Light with RailBlaza Quikport Mount - BlackFully portable, fully waterproof, USCG certified, and it floats!The Lunasea Portable Nav light is a rechargeable lithium polymer battery-powered navigation LED fixture designed for rugged marine use and harsh outdoor conditions. Designed to work with both RAILBLAZA™, Navimount™, and Go-Pro™ mounting systems.The light boasts a bright, steady light that’s US Coast Guard-approved for visibility up to 2 nautical miles. It offers six selectable light modes.Easy to mount and operate, making it a reliable companion for various activities: sailing, paddling, surfing, jet skiing, or rowing on lakes or rivers.Features: 6 Modes, Tri, Bi, Red, Green, Stern, Flash 1800maH Lithium Polymer Rechargeable Battery Waterproof and Floats if dropped in water No more wasting batteries Certified ABYC A-16, 2NM 2-year warranty Specifications: Housing: Black LED: Yes Lens Color: Clear Visible Range (Miles): 2nm Box Dimensions: 2"H x 7"W x 10"L WT: 0.75 lbs UPC: 894953001029
$139.99$88.50