Lighting - Underwater Lighting
Shadow-Caster SC2 Series Polymer Composite Surface Mount Underwater Light - Full Color [SC2-CC-CSM]
SC2 Series Polymer Composite Surface Mount Underwater Light - Full ColorThe SC2 underwater light provides a vessel with 24 watts of intense LED lighting. The SC2s are designed with a sub-compact 2.99" polymer composite for under-the-waterline surface mounting. Single-color and color-changing versions are available with variable brightness and a wide array of control options. This underwater light has a Full color (RGBW) color output.Features: A proprietary clear gel-filled design, injected through the entire unit, eliminates condensation and/or water intrusion under stress Tough, scratch-resistant, tempered glass lens with polymer composite housing—impervious to acetone, solvents, and demanding marine environments Transient surge and reverse polarity protection dramatically prolong unit life Thermal throttling technology enables safe operation even in water From simple on-off to full-feature lighting effects, the unit is enabled for a host of control interfaces Specifications: Color: Full color (RGBW) Up to 3,000 lumens 120-degree beam angle 24-watt power draw 2 amps of operating current draw @ 12V 10-30 volts input 2.99” (75.9mm) outside diameter IP68 fully submersible waterproof design Includes: Lighting unit 3’ (1m) submersible grade cable 3 mounting screws 3-year standard warranty 2 Control Options: Power Toggle Control - Quickly toggle the power source to advance to the next color or brightness level Add Shadow-NET™ Control - Dramatic, full-feature control through your Multifunction Display (MFD) by adding the Light Commander Shadow-NET™ control module (SCM-LC-PLUS) and app Specifications: Color: Full Color RGBW Material: Composite Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 24 Box Dimensions: 3"H x 6"W x 8"L WT: 0.55 lbs UPC: 8500243429030
$264.00$249.00
Hella Marine Apelo A3 White/Blue Underwater Light - Bronze - White Lens [016830001]
Apelo A3 White/Blue Underwater Light - Bronze - White LensSupercharged with 6000-lumen light output, the Apelo A3 is the ultimate in the Hella Marine Apelo Underwater Light range.The A3 model has an improved formula with double the light output, maximizing the vibrant blue and intense white. This version sports the edge lighting Apelo is known for.Optical intelligence is at the heart of Hella Marine lighting, and Apelo is no exception. Intelligent optics spread light across the water without losing light to the depths, projecting wide across the transom. With the addition of nickel-silver to the extremely corrosion-resistant housing, the Apelo A3 is perfect for permanently submerged installations on larger boats and ships.Features: Suitable for fiberglass, timber, steel, and composite hulls Only mount on aluminum-hulled vessels with a suitable isolation spacer Made in New Zealand and backed by Hella Marine’s 5-year warranty (Apelo Underwater Lights are built to last) Specifications: Mounting: Transom/surface Voltage: Multivolt™ 12 / 24V DC Nominal Max. Power Consumption: Blue/white 70W / 5.9A @ 12V, 2.9A @ 24V & Edge Light <5W / 0.37A @12V, 0.2A @ 24V Max. Light Output: 6000 lumens (white) Color Temperature: 5000K (white) Beam: 90° x 24° Protection: Spike protected to +500 volts; reverse polarity protected to -700 volts; IP68 / IP69: Suitable for submersion in operation and high-pressure water jet cleaning; High-temperature thermal cutout for out-of-water Cable Length: 2.5m / 8.2ft, tinned marine cable Ideal Depth: 100–500mm Ideal Width: 600–1200mm Lens Material: Grilamid® (premium grade, UV stable, impact resistant nylon) Base Material: Marine grade bronze Compliance: CE, UKCA, EN55015 / CISPR 15, IEC60533, IEC61547, ICES-005, RCM Specifications: Color: White/Blue Material: Bronze Box Dimensions: 5"H x 6"W x 6"L WT: 2.8 lbs UPC: 9416325252535
$744.44$443.50
OceanLED Explore E2 Narrow Beam - Ultra White [E2002W]
Explore E2 Narrow Beam - Ultra WhiteThe E2 is our latest addition to the Explore range, giving customers a compact smaller XFM light for tight installation spaces, but with all the build quality and premium features of the larger lights in the range.Choice of BeamWith the E2, you can choose either the signature Explore Series wide-angle beam(90° x 20° Elliptical), or a new narrow “laser” beam shape (20° Circular), depending on your desired effect.Advanced Water Ingress ProtectionThe Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.XFM RemovalThe Explore E2 has the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat.Control your Explore E2 lightsControl your Explore E2 lights via the 3rd party switch or push button of your choice.Features: Elliptical 90° / 20° Wide Beam Option Circular 20° Beam Option Up to 3000 Fixture Lumens Compact design and built-in driver. Ultra-low profile outer bezel. IP69k Certification + In-hull Temporary Submersion Protection Specifications: Fixture Lumens* (total light output from a finished fixture): 3000 Beam angle (Wide): 90° / 20 ° Elliptical Beam angle (Narrow): 20° Circular IP Rating: IP69k Minimum-Maximum operating voltage DC: 10-30V DC Current / Amp draw (DC): 3.5A@12V DC / 1.5A@24V DC Driver type: Internal Correlated Color Temp: 6500k (White) Rear Temporary Submersion Protection: Yes Fish Strobe: Yes Anti-fouling properties: Tritonium coated lens LED Manufacturer: CREE Mounting Recommendations: Boat size: Up to 20m (65’) Transom / Hull spacing: 1 - 1.5m (3-5’) Installation depth below waterline: 25-30cm (10-12”) Maximum Hull Thickness: 60mm (2.4”) Physical: Total weight: 0.8kg (1.76lbs) Total Diameter (Including Bezel): 80mm (3.15”) Diameter Of Body: 59mm (2.32”) Profile Of Fixture: 3.5mm (0.14”) Overall Length: 101.5mm (4”) Minimum Space Required Inside The Hull: 172mm (6.78”) Hole Cut-Out: 60mm (2.37”) Material (Mounting Tube / Bezel): AB2 Aluminium Bronze Material (Light Body): AB2 Lens: Glass Optics (Wide Beam Option): Hybrid Collimated Optics (Narrow Beam Option): Collimated CE Approved: Yes Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
$1,224.00$815.50
OceanLED Explore E2 Narrow Beam - Midnight Blue [E2002B]
Explore E2 Narrow Beam - Midnight BlueThe E2 is our latest addition to the Explore range, giving customers a compact smaller XFM light for tight installation spaces, but with all the build quality and premium features of the larger lights in the range.Choice of BeamWith the E2, you can choose either the signature Explore Series wide-angle beam(90° x 20° Elliptical), or a new narrow “laser” beam shape (20° Circular), depending on your desired effect.Advanced Water Ingress ProtectionThe Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.XFM RemovalThe Explore E2 has the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat.Control your Explore E2 lightsControl your Explore E2 lights via the 3rd party switch or push button of your choice.Features: Elliptical 90° / 20° Wide Beam Option Circular 20° Beam Option Up to 3000 Fixture Lumens Compact design and built-in driver. Ultra-low profile outer bezel. IP69k Certification + In-hull Temporary Submersion Protection Specifications: Fixture Lumens* (total light output from a finished fixture): 3000 Beam angle (Wide): 90° / 20 ° Elliptical Beam angle (Narrow): 20° Circular IP Rating: IP69k Minimum-Maximum operating voltage DC: 10-30V DC Current / Amp draw (DC): 3.5A@12V DC / 1.5A@24V DC Driver type: Internal Correlated Color Temp: 6500k (White) Rear Temporary Submersion Protection: Yes Fish Strobe: Yes Anti-fouling properties: Tritonium coated lens LED Manufacturer: CREE Mounting Recommendations: Boat size: Up to 20m (65’) Transom / Hull spacing: 1 - 1.5m (3-5’) Installation depth below waterline: 25-30cm (10-12”) Maximum Hull Thickness: 60mm (2.4”) Physical: Total weight: 0.8kg (1.76lbs) Total Diameter (Including Bezel): 80mm (3.15”) Diameter Of Body: 59mm (2.32”) Profile Of Fixture: 3.5mm (0.14”) Overall Length: 101.5mm (4”) Minimum Space Required Inside The Hull: 172mm (6.78”) Hole Cut-Out: 60mm (2.37”) Material (Mounting Tube / Bezel): AB2 Aluminium Bronze Material (Light Body): AB2 Lens: Glass Optics (Wide Beam Option): Hybrid Collimated Optics (Narrow Beam Option): Collimated CE Approved: Yes Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
$1,224.00$815.50
Shadow-Caster SC3 Series Bimini Blue Bronze Surface Mount Underwater Light [SC3-BB-BZSM]
SC3 Series Bimini Blue Bronze Surface Mount Underwater LightThe SC3 underwater light provides your vessel with 24 watts of intense LED lighting. The SC3s are designed with a sub-compact 3.4-inch diameter bronze housing for under-the-waterline surface mounting.Features: Proprietary clear gel-filled design, injected through the entire unit —eliminates condensation and water intrusion under stress Tough, scratch-resistant, tempered glass lens with bronze housing — impervious to acetone, and solvents common in demanding marine environments Transient surge and reverse polarity protection — dramatically prolong unit life Thermal throttling technology — enables safe operation even out of water Can be operated from a standard on/off switch Use compatible Shadow-NET™ controller for full-feature lighting control Specifications: Color: Bimini blue Up to 3,000 lumens 120-degree beam angle 24-watt power draw 2 amps operating current draw @ 12 v 10-30 volts input 3.4” (86mm) outside diameter IP68 fully submersible waterproof design Includes: Lighting unit 3 ft. (1m) submersible grade cable 3 mounting screws 3-year standard warranty 2 Control Options: Power Toggle Control - Quickly toggle power source to advance to next color or brightness level Add Shadow-NET™ Control for CC versions - Dramatic, full-feature control through your Multifunction Display (MFD) by adding the Light Commander Shadow-NET™ control module (SCM-LC-PLUS) and app Specifications: Color: Blue Material: Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30 Watts: 24 Box Dimensions: 4"H x 5"W x 5"L WT: 1.55 lbs UPC: 8500243426824 Quick Guide (pdf)
$339.99$319.00
OceanLED Explore E6 Thru Hull - Blue White [E6TH009BW]
Explore E6 Thru Hull - Blue & WhiteThe Explore E6 TH is the perfect choice for transoms that require a thru-hull-style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design.The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition.The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht.IP69k Protection & Temporary Rear Submersion ProtectionAs part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k.IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts.The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.Superior Protection. Total Peace of Mind.Features  90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control Specifications:Warranty: 3 years Specifications: Color: White/Blue Material: Aluminum Mounting Style: Thru-Hull Watts: 113 Box Dimensions: 7"H x 8"W x 11"L WT: 5.15 lbs UPC: 5051803008712 Quick Guide (pdf)
$2,680.00$1,785.50
OceanLED Discover Series D3 Underwater Light - Ultra White [D3009W]
Discover Series D3 Underwater Light - Ultra WhiteThe Discover Series D3 underwater LED light from OceanLED, is ideal for boats that want to discover the many benefits of underwater lighting.Superior Protection, Total Peace of MindThe Discover D3 is rated at IP69k, the highest achievable rating of protection against water ingress. IP69k goes one step further than the industry standard IP68, giving you additional protection and peace of mind. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Compact DesignThe D3’s compact dimensions make it ideal for tight-fitting areas or smaller boats.Advanced Signature Optics - Wide Surface BeamThe Discover D3 benefits from OceanLED’s signature optics (90° x 20°), producing an unrivaled optimal lighting effect.Advanced Signature Optics - Narrow side BeamThe OceanLED signature optics produce a narrow side beam, that has a minimal light loss, focusing the beam where you need it and penetrating further through the water.Control your lights  Control your Discover D3 lights via the 3rd party switch or push button of your choice. Consult the installation manual for more information.Features: 700 Fixture lumens 90° Top Beam Elliptical Beam Shape 20° Side Beam IP69k Protection Compact size for tight spaces and smaller boats Rear Submersion Protection Can be used above water Specifications: Color: White Material: Anodized Aluminum Mounting Style: Thru-Hull Box Dimensions: 4"H x 4"W x 4"L WT: 0.6 lbs UPC: 5051803008330 Quick Guide (pdf)
$318.40$233.50
OceanLED Discover Series D3 Underwater Light - Ultra White with Isolation Kit [D3009WI]
Discover Series D3 Underwater Light - Ultra White with Isolation KitThe Discover Series D3 underwater LED light from OceanLED, is ideal for boats that want to discover the many benefits of underwater lighting.Superior Protection, Total Peace of MindThe Discover D3 is rated at IP69k, the highest achievable rating of protection against water ingress. IP69k goes one step further than the industry standard IP68, giving you additional protection and peace of mind. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Compact DesignThe D3’s compact dimensions make it ideal for tight-fitting areas or smaller boats.Advanced Signature Optics - Wide Surface BeamThe Discover D3 benefits from OceanLED’s signature optics (90° x 20°), producing an unrivaled optimal lighting effect.Advanced Signature Optics - Narrow side BeamThe OceanLED signature optics produce a narrow side beam, that has a minimal light loss, focusing the beam where you need it and penetrating further through the water.Control your lights  Control your Discover D3 lights via the 3rd party switch or push button of your choice. Consult the installation manual for more information.Features: 700 Fixture lumens 90° Top Beam Elliptical Beam Shape 20° Side Beam IP69k Protection Compact size for tight spaces and smaller boats Rear Submersion Protection Can be used above water Specifications: Color: White Material: Anodized Aluminum Mounting Style: Thru-Hull Box Dimensions: 4"H x 4"W x 4"L WT: 0.6 lbs UPC: 5051803008361 Quick Guide (pdf)Owner's Manual (pdf)
$318.40$233.50
OceanLED Discover Series D3 Underwater Light - Midnight Blue with Isolation Kit [D3009BI]
Discover Series D3 Underwater Light - Midnight Blue with Isolation KitThe Discover Series D3 underwater LED light from OceanLED, is ideal for boats that want to discover the many benefits of underwater lighting.Superior Protection, Total Peace of MindThe Discover D3 is rated at IP69k, the highest achievable rating of protection against water ingress. IP69k goes one step further than the industry standard IP68, giving you additional protection and peace of mind. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Compact DesignThe D3’s compact dimensions make it ideal for tight-fitting areas or smaller boats.Advanced Signature Optics - Wide Surface BeamThe Discover D3 benefits from OceanLED’s signature optics (90° x 20°), producing an unrivaled optimal lighting effect.Advanced Signature Optics - Narrow side BeamThe OceanLED signature optics produce a narrow side beam, that has a minimal light loss, focusing the beam where you need it and penetrating further through the water.Control your lights  Control your Discover D3 lights via the 3rd party switch or push button of your choice. Consult the installation manual for more information.Features 700 Fixture lumens 90° Top Beam Elliptical Beam Shape 20° Side Beam IP69k Protection Compact size for tight spaces and smaller boats Rear Submersion Protection Can be used above water Specifications: Color: Blue Material: Anodized Aluminum Mounting Style: Thru-Hull Box Dimensions: 4"H x 4"W x 4"L WT: 0.6 lbs UPC: 5051803008378 Quick Guide (pdf)Owner's Manual (pdf)
$318.40$233.50
Shadow-Caster SC3 Series Underwater Light - Great White [SC3-GW-ALSM]
SC3 Series Underwater Light - Great WhiteThe SC3 underwater light provides your vessel with 24 watts of intense LED lighting. The SC3s are designed with a sub-compact 3” diameter hard anodized aluminum housing for under the waterline surface mounting. Single color or color-changing versions are available with variable brightness and a wide array of control options.Features: Proprietary clear gel-filled design, injected through the entire unit - eliminates condensation and/or water intrusion under stress Tough, scratch-resistant, tempered glass lens with hard-anodized aluminum housing - impervious to acetone, solvents, and demanding marine environments Transient surge and reverse polarity protection — dramatically prolong unit life Thermal throttling technology - enables safe operation even out of water From simple on-off to full-featured lighting effects, the unit is enabled for a host of control interfaces Specifications: Up to 3,000 lumens 120-degree beam angle 24-watt power draw 2 amps operating current draw @ 12V 10-30 volts input 3.6” (91.44mm) outside diameter IP68 fully submersible waterproof design Includes: Lighting unit 3’ (1M) submersible grade cable 3 mounting screws 3 year standard warranty Quick Guide (pdf)Brochure (pdf)
$269.99$249.00
Shadow-Caster SC3 Series Underwater Light - Bimini Blue [SC3-BB-ALSM]
SC3 Series Underwater Light - Bimini BlueThe SC3 underwater light provides your vessel with 24 watts of intense LED lighting. The SC3s are designed with a sub-compact 3” diameter hard anodized aluminum housing for under the waterline surface mounting. Single color or color-changing versions are available with variable brightness and a wide array of control options.Features: Proprietary clear gel-filled design, injected through the entire unit - eliminates condensation and/or water intrusion under stress Tough, scratch-resistant, tempered glass lens with hard-anodized aluminum housing - impervious to acetone, solvents, and demanding marine environments Transient surge and reverse polarity protection — dramatically prolong unit life Thermal throttling technology - enables safe operation even out of water From simple on-off to full-featured lighting effects, the unit is enabled for a host of control interfaces Specifications: Up to 3,000 lumens 120-degree beam angle 24-watt power draw 2 amps operating current draw @ 12V 10-30 volts input 3.6” (91.44mm) outside diameter IP68 fully submersible waterproof design Includes: Lighting unit 3’ (1M) submersible grade cable 3 mounting screws 3 year standard warranty Quick Guide (pdf)Brochure (pdf)
$269.99$249.00
Shadow-Caster SC3 Series Underwater Light - Full-Color Change - 12-Color Standard or Unlimited Colors w/Shadow-NET [SC3-CC-ALSM]
SC3 Series Underwater Light - Full-Color Change - 12-Color Standard or Unlimited Colors with Shadow-NET®The SC3 underwater light provides your vessel with 24 watts of intense LED lighting. The SC3s are designed with a sub-compact 3” diameter hard anodized aluminum housing for under the waterline surface mounting. Single color or color-changing versions are available with variable brightness and a wide array of control options.Features: Proprietary clear gel-filled design, injected through the entire unit - eliminates condensation and/or water intrusion under stress Tough, scratch-resistant, tempered glass lens with hard-anodized aluminum housing - impervious to acetone, solvents, and demanding marine environments Transient surge and reverse polarity protection — dramatically prolong unit life Thermal throttling technology - enables safe operation even out of water From simple on-off to full-featured lighting effects, the unit is enabled for a host of control interfaces Specifications: Up to 3,000 lumens 120-degree beam angle 24-watt power draw 2 amps operating current draw @ 12V 10-30 volts input 3.6” (91.44mm) outside diameter IP68 fully submersible waterproof design Includes: Lighting unit 3’ (1M) submersible grade cable 3 mounting screws 3 year standard warranty Quick Guide (pdf)Brochure (pdf)
$309.99$279.00