Flush Mount Spreader Light - BlackThe third-generation flush-mounted spreader light features five 3-watt LEDs to provide plenty of illumination. Composite trim ring snaps over housing for a finished look. Mounts with two screws, concealed by the trim ring, on either side of the fixture. This latest version adds one more LED for a total of 5. The redesign still allows this updated model to fit in the same cut-out as the older models, to make upgrades easy.Features:
12/24 V - 12 W
Polycarbonate Lens
UV Resistant
Hidden Mounting Screws
Cool white LED color (5,500 - 6,300K)
Temperature of LED: less than 158° with 77° ambient temperature
Five 3 Watt Samsung 3535 LEDs
1,000 Lumens
Equivalent to 120 Watt Halogen bulbs
LED Lifetime: 50,000 Hours
LED Beam angle: 110°
0.8 Amp draw at 12 Volt
IP68
Fits the previous cutout
Dimensions: 6” W x 2-1/2” H x 1-3/4” D
Cutout: 4-1/2” W x 1-1/2” H
Scan-Strip Light - 8" - BlueScan-Strip LED lighting is a quality product for marine or RV use.Features:
8 in. blue light in retail packaging
Mount this scan strip light under gunwales, in storage lockers, coolers, fish boxes, and engine rooms
Use the below deck in cabin areas for general lighting or courtesy lights
*The "P" within the part number indicates retail packaging Specifications:
Type: Lights
Box Dimensions: 1"H x 4"W x 10"L WT: 0.15 lbs
UPC: 786142413471
16" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features:
Switching off for more than 4 seconds resets the color to white
RGBW LEDs
Colors are daylight white (4000-4500K), blue, red, green
Lifespan 30,000+ Hours
12/24 Volt
IP65 can be installed in engine rooms and exterior locations
Ideal for under-gunwale lighting
SS Mounting Screws Included
Specifications:
Beam Angle: 120°
Watts: 2.4
Lumens: 180
Dimensions (L X W x H) (inch): 16" x 7/8" x 1/2"
*The "P" within the part number indicates retail packaging Specifications:
Type: Lights
Box Dimensions: 1"H x 4"W x 17"L WT: 0.2 lbs
UPC: 786142416519
Mirage - Flush Mount Down Light - Glass Finish/White Bezel - Warm White DimmingLumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens).Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 500mA
24V DC Amps: 270mA
Correlated Color Temperature: 3000
Color Rendering Index: 90+
Rated Watts: 6
Lumens (White): 290
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 3.25" (8.25cm)
Height: 3.25" (8.25cm)
Depth: 1.11" (2.81cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
LED: Yes
Voltage - Input Range (Volts): 10-30v
Dimming: Yes
Housing: White
LED Color: Warm White
Box Dimensions: 2"H x 3"W x 3"L WT: 0.2 lbs
UPC: 089300103857
Brochure (pdf)
E-Series Lens Cover 6" - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features:
Easy to Snap On & Off
Polycarbonate Plastic
Extra Layer of Protection
E-Series PRO 30" Spot-Flood Combo LED - WhiteThe E-Series is one of RIGID's most versatile, all-around lighting solutions, and recent enhancements in LED technology delivering up to 111% more raw lumens than ever before with the E-Series PRO. Among RIGID's most popular product lines, the E-Series PRO has recently benefited from several upgrades to improve both looks and performance. Plus, new branding and new blacked-out circuit boards give the E-Series PRO a more refined look. Available with your choice of optics, the E-Series features a host of beam options, including Spot, Flood, Driving, Hyperspot, Diffused, and new Driving/Spot and Spot/Hyperspot combinations. These and other innovations make it one of the brightest and most efficient LED light bars on the market. The E-Series was born in off-road, but its versatility makes it well suited for use with power sports, marine, general automotive and even first responder applications.Features:
Optics: Hybrid - Spot / Flood Combo
LED Color: White
Finish Color:White
Length: 30"
Mount Type: Surface
Shipping Dimensions: 6" × 33.25" × 6"
Product Weight: 8.78lb
Sold As: Single
Specifications:
Watts: 165
Amp Draw: 11.96
LED's: 60
Raw Lumens: 13800
Lux @ 10M: 4010.0
Beam Distance: 1266.5M
Peak Beam Intensity: 401,000 cd
Specifications:
Beam Pattern: Spot-Flood Combo
Length (Inches): 30"
Housing: White
Voltage - Input Range (Volts): 12v
Box Dimensions: 7"H x 7"W x 34"L WT: 12.5 lbs
UPC: 849774029455
Brochure (pdf)
Light Commander Version 2 - 6-Zone Lighting Controller with Bluetooth/Wi-Fi, NMEA 2000 & HTML Ethernet ConnectivityDiscover the SHADOW-CASTER® Light Commander NMEA 2000, a pioneering solution in LED lighting control for boats. This first-of-its-kind product is crafted in compliance with the latest NMEA 2000 lighting control standards, ensuring enhanced lighting control, seamless marine system integration, and improved interoperability.Control up to 6 zones of lighting per module, including 4 zones of RGB or RGBW lights, with ease and precision. Explore, set, and store a variety of lighting scenes – from color change, fade, rotation, and strobe, through to music sync effects, offering versatility and customization to illuminate your boat like never before.Encased in durable IP67 housing with Deutsch-style IP67 connections, the Light Commander NMEA 2000 ensures reliability and performance in the marine environment. The backlit logo signifies the quality and innovation that SHADOW-CASTER® is renowned for.Elevate your marine lighting experience with the Light Commander NMEA 2000 – where technology meets functionality and style.Features:
NMEA 2000 Backbone or MFD Network Port Connectivity
Global control for all lighting
Up to 6 separate zones of lighting control – expandable to 12 or 18 by connecting additional SCM-LC-N2K modules
6 “Instant ON” switch inputs for enabling lights without MFD control
Supports RGB and RGBW lighting
Optional wireless connectivity for control from a mobile device (SCM-LC-PLUS-V2)
IP67 Water-resistant housing with waterproof connections
Deutsch style IP67 rated connections, for clean OEM installations
All in one design, no need for a separate MFD communication bridge
“Digitally fused” over current protection circuits, 15amps/channel (X4)
Backlit logo and zone indicator LEDs to indicate functions and operation
Built-in 3.5mm female audio port and microphone for music sync input
Multi-zone Lighting Controller for NMEA 2000 & Ethernet connectivity with integrated HTML interface
Specifications:
IP67 rated enclosure
Power: Supports over 600 watts of RGB lighting and virtually limitless Shadow-NET® connected modules
15 amps per RGB(W) zone, 60 amps max
10 to 30V input range
Direct 3.5mm female audio input for music synchronization
Music sync created by onboard DSP (Digital Signal Processing)
Digital power protection set at 15amps/channel
Built-in switch inputs for instant lighting for each zone
24-bit color support and gamma correction for universal color support
Enclosure: 8.9” (226mm ) x 4.75” (120mm) x 1.8” (46mm)
Quick Guide (pdf)Owner's Manual (pdf)
Radiance + Curved 50" Light Bar - RGBWThe stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ Curved RBGW light bars. The latest addition to the Radiance light family provides the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ Curved RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary RDS-Series but include a stylish color-changing backlight.Inside, the Radiance+ Curved RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ Curved RGBW light bars take the customization of your vehicle to the next level. Own the night in style with Radiance+ RBGW lighting.Features:
8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode)
Backlighting is independently controlled using switch logic.
Fits All RDS-Series Light Covers And Mounts
Black exposed printed circuit board
10-year warranty
9-15 V DC
Black powder coat finish
Pressure equalizing vent
IP68 compliant - dust and water ingress
High-grade aluminum alloy housing and heat sink
Over/under voltage protection
high-impact polycarbonate lens
Mounting brackets are included
RFI/EMI protection
Rohs compliant
Off-road use only
Product Comes with:
50-inch Radiance+ RGBW light bar
Harness
Mounting brackets
Media pack
Specifications:
Size (inch): 50"
Weight (Lbs): 14.20
Optics: Spot drive
Watts: 230
Amp Draw: 16.4
Raw Lumens: 21384
Specifications:
Beam Pattern: Spot-Driving Combo
Housing: Black
Length (Inches): 50"
Voltage - Input Range (Volts): 12v
Box Dimensions: 5"H x 10"W x 54"L WT: 17.85 lbs
UPC: 849774034220
40" Adapt E-Series Lightbar - BlackThe RIGID Adapt E-Series LED Light Bar features the same style and construction as RIGID’s legendary E-Series, from the high-strength aluminum heat sink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology. The Adapt E-Series takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions. Features:
Harness, Switch & Relay Included
3 Optic Zones - Scene, Driving, Spot
Seamless Beam Transition
Slow Speed, Moderate Speed & High Speed Beam Patterns
9-36 VDC
Two Layers of Adaptive Response
Active Power Management™ System - Power Capacity Sensing
Active View Technology™ - Internal GPS Module
Use In Adapt Mode Or All On
Alloy Housing and Heatsink
Unbreakable Polycarbonate Lens
Pressure Equalizing Vent
Black Exposed Printed Circuit Board
Patented Optics
50,000 Hr+ LED Lifespan
Off Road Use Only
In the Box:
Stainless Steel Mounting Brackets
Hardware Kit
Wire Harness
Relay
Switch
Install Instructions
∗ Sold as an Individual Specifications:
Voltage - Input Range (Volts): 12v
Length (Inches): 40"
Housing: Black
Box Dimensions: 7"H x 7"W x 44"L WT: 15.75 lbs
UPC: 849774033162
Brochure (pdf)
Deluxe LED Courtesy Light - Down Facing - White Large Deluxe LED Courtesy Lights are constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. Available with outward directed light or downward directed light. These lights feature 3 low amperage, long life white LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9–28VDC. IP67 waterproof rating.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12v
Housing: Stainless
LED Color: White
Dimming: No
Box Dimensions: 1"H x 4"W x 6"L WT: 0.15 lbs
UPC: 035514403818
20" Adapt™ Light Bar - BlackThe Adapt™ LED Light Bars are the world’s first off-road lighting products that can change instantly according to conditions. Adapt offers 8 selectable beam patterns that range from a 90 degree broad short-distance beam to a highly focused 15 degree long-distance spot beam in a single fixture. It also includes RIGID’s new Active View™ Technology, which allows the beam pattern to actively adjust with vehicle speed. There are no moving parts within the Adapt. Instead, RIGID uses advanced LED technology and combines it with optics to create a revolutionary lighting solution that can Adapt with changing conditions. Further, Adapt has built-in accent lighting that can be set to any color in the light spectrum, including white, for a custom look around town. The Adapt has a signature new look that is unlike any other light bar on the market, and it even has expanded mounting capabilities that include new base-mounting options in addition to traditional side mounts. Adapt LED light bars include a RIGID Dash Controller, which is a molded backlit dash-mounted unit that offers easy, intuitive control of Adapt’s beam patterns, Adaptive Mode, accent lighting, and programmable presets. RIGID Adapt Light Bars are available in 10-inch to 50-inch lengths and include a RIGID Dash Controller, Under Dash Module, wiring harness, and mounting hardware. With the RIGID Adapt, it has never been easier to Own the Night.*GPS Module Kit IncludedFeatures:
Active View Technology - Automatically Change Beam Patterns Based On Vehicle Speed (ADAPT GPS Module Required)
Dash Controller with Wiring Harness
8 Selectable Beam Patterns From 15-Degrees to 90-Degrees
Integrated Optic Design with Spot, Flood, and Driving Zones
Selectable RGB-W Accent Lighting – Choose From Any Color in the Light Spectrum
Back Lit Molded Dash Controller - Enables User to Select Mode, Accent Color, Adaptive Mode, and Select Between 2 User Presets
2 User Presets – Preset Both Beam Pattern Mode & Accent Lighting Colors
Multiple Mounting Locations; Traditional Side Mounting or Underside Low-Profile Mount
Specifications:
Length (Inches): 20"
Housing: Black
Voltage - Input Range (Volts): 12v
Box Dimensions: 7"H x 8"W x 24"L WT: 13.7 lbs
UPC: 849774031724
Owner's Manual (pdf)Brochure (pdf)
M6 Gen2 Mast Light - Surface Mount - Warm WhiteThe M6 Gen2 Mast Series light from OceanLED is 50% brighter than its previous model with an improved design.The narrow beam angle helps focus the powerful LEDs, enhancing the natural beauty of your vessel, making It perfect for illuminating your rigging.RiggingSuitable for aluminium, steel and composite rigs on all sizes of boats ranging from sport fishing to larger yachts.Easy to install, sturdy, weatherproof and exceptionally easy to maintain. Ultra low power draw, reverse polarity protection.Features:
38° Top Beam
Up to 660 Fixture Lumens
38° Side Beam
Circular Beam
1/2” (13mm) Hole
12/24vDC
40,000+ Hour Life
Active Thermal Control
Compact simple design
Easy to clean
Factory Sealed Unit
No Breakable Parts
Color: Warm White
Specifications:Warranty: 2 years Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12/24v
Housing: Clear
LED Color: Warm White
Dimming: No
Box Dimensions: 3"H x 5"W x 11"L WT: 1.3 lbs
UPC: 5051803007333
Brochure (pdf)