Lighting

NaviLED Port & Starboard Pair - 2nm - Colored Lens/White HousingCompact LED navigation lamps. Attractive, power saving and ultra reliable. Designed and manufactured in New Zealand, NaviLED® lamps save power on board and provide outstanding durability.Ultra low current drawNaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined!No bulbs, No maintenance, Ultra long service lifeHella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions.Multivolt™ 9-33V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Fully sealed for life. IP 67 certifiedEach NaviLED® lamp is a completely sealed unit. High impact housings ensure durability from waves and impact.Pre-wired with Marine CableSingle core (120mm) or twin core (2.5m) sheathed marine cable assemblies available. Ensures time saving, completely sealed installations.Specifications: Material Description: UV resistant, enhanced impact resistant acrylic lens High impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with marine cable Operating Voltage: Multivolt™ 9-33V DC (earlier version 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 60g (with 120mm cable version) Approvals:  IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ Specifications: Lens Color: Red/Green Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 2"H x 4"W x 8"L WT: 0.3 lbs UPC: 9416325196501 Quick Guide (pdf)

Read more less

4-Channel Underwater Light Relay Module The SCM-PD4CH is a 4-position power distribution box that provides a convenient way to connect up to 4 Shadow-Caster™ underwater lights. Digital over-current protection for each output ensures the safe operation of multiple lights and provides an easy way to manage the relatively high current switching needs of multiple light installations.The SCM-PD4CH is housed in a compact waterproof box that is ideal for mounting in the bilge and wet locations.Features: Compact remote power control box Green/red LED indicates the status of each output channel Individual digital over-current protection for each channel Compatible with Shadow-Caster™ single and multi-color lights Recommended when installing two or more underwater lights Can be used with a helm-mounted switch or with no switch when using a compatible Shadow-Caster™ controller Blue Shadow-Caster™ backlight indicates the state 3-Year Warranty Specifications: Compatible with 12 or 24V systems Up to 10 amps per channel 5/16-18” power lugs IP67 wash down rated enclosure What's Included? 4 position power control box Mounting hardware 4 #8 PH SS x.5” Quick Guide (pdf)

Read more less

NaviLED Port & Starboard Pair - 2nm - Clear Lens/White HousingCompact LED navigation lamps. Attractive, power-saving, and ultra-reliable. Designed and manufactured in New Zealand, NaviLED® lamps save power on board and provide outstanding durability.Ultra-low current drawNaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined!No bulbs, No maintenance, ultra-long service lifeHella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration-proof for proven reliability and safety in demanding conditions.Multivolt™ 9-33V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Fully sealed for life. IP 67 certifiedEach NaviLED® lamp is a completely sealed unit. High-impact housings ensure durability from waves and impact.Pre-wired with Marine CableSingle-core (120mm) or twin-core (2.5m) sheathed marine cable assemblies available. Ensures time-saving, completely sealed installations.Specifications: Material Description: UV-resistant, enhanced impact-resistant acrylic lens High-impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with marine cable Operating Voltage: Multivolt™ 9-33V DC (earlier version 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 60g (with 120mm cable version) Approvals:  IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ Specifications: Lens Color: Red/Green Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 2"H x 4"W x 8"L WT: 0.4 lbs UPC: 9416325196570 Quick Guide (pdf)

Read more less

Radiance + 10" Light Bar - RGBWThe stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ RBGW light bars. The latest addition to the Radiance light family provides you with the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary E-Series but include a stylish color-changing backlight.Inside, the Radiance+ RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ RGBW light bars take customization to the next level. Own the night in style with Radiance+ RBGW lighting.Features: 8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode) Backlighting is independently controlled using switch logic. Fits all E-Series light covers and mounts Black exposed printed circuit board 10-year warranty 9-15 V DC Black powder coat finish Pressure equalizing vent IP68 compliant - dust and water ingress High-grade aluminum alloy housing and heat sink Over/under voltage protection high-impact polycarbonate lens Mounting brackets are included RFI/EMI protection Rohs compliant Off-road use only Product Comes with: 10-inch Radiance+ RGBW light bar Harness Mounting brackets Media pack Specifications: Size (inch): 10"  Weight (Lbs): 4.40 Optics: Spot drive Watts: 51 Amp Draw: 3.65 Raw Lumens: 4752 Lux at 10m: 834.99 Beam Distance at 1Lux: 289 Beam Distance at .25 Lux: 577.9 Peak Beam Intensity (cd): 83499     Horizontal Beam Angle: 18  Specifications: Beam Pattern: Spot-Driving Combo Housing: Black Length (Inches): 10" Voltage - Input Range (Volts): 12v Box Dimensions: 7"H x 7"W x 13"L WT: 6.25 lbs UPC: 849774034145

Read more less

2" Marine LED Pod Light - Flood Optics - White Housing - Pro Series 3.0The Marine Series POD was crafted to handle water and salt corrosion, offering solid aluminum construction engineered with "Marine" as Black Oak's number one priority. The all-white marine POD provides a sharp look to any boat, ATV, white truck, Jeep, or UTV. These Cree light PODs are perfect as backup lights, headlights, bed lights, and so much more. Completely submersible by up to 9 feet of water, the 2x2 M-POD is IP69K marine-rated, all backed by Black Oak's limited lifetime warranty.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Sheer PowerThis light can be turned in any direction, allowing an absurd amount of light exactly where it's needed. Upgrade to the 10w CREE light POD and blast an impressive 3100+ lumens with ONLY 4 LEDs! Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual Specifications: Amps - Draw: 2.8 Bulb Type: LED Bulb Watts: 40 Waterproof: Yes Wireless: No Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs UPC: 850044517121

Read more less

Rock Accent Light - RGB - Black Housing LED's Rock Lights are the perfect addition to any vehicle.  Whether you're rock crawling in Moab or out in the sticks,  Black Oak LED's Off Road Rock Lights for trucks and other vehicles will keep your undercarriage and surrounding terrain lit up.  *Must be used with a RGB Controller. Technical Specifications: Light Color - RGB Total Wattage - 9W Amp. Draw - .35 Amp Raw Lumens - 220 In the Box: Accent light Mounting pad Mounting hardware *Sold as an Individual  Specifications: Housing: Black Bulb Type: LED Dimming: Yes LED Color: RGBW Box Dimensions: 3"H x 4"W x 4"L WT: 0.35 lbs UPC: 850044517404

Read more less

Rock Accent Light - Blue LEDs - White HousingLight up a console, compartments, under-gunnels, and much more with Black Oak's IP69K rated marine accent lights! This small yet powerful light has LEDs that are sure to provide users with the lighting needed while on the water. Features: Blue LEDs Activities & Uses:  Accent lighting Compartment lighting Map lighting Trailer lighting Console lighting Under-gunnel lighting Technical Specifications: Total Wattage: 9W Amp. Draw: 0.35 LED Quantity: 3 Weight: 0.35 lbs. Raw Lumens: 220 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Width): 2-3/4" x 1-1/2" x 3/8”  Hole to Hole Distance: 2" In the Box: (1) Accent light with positive and negative lead (1) Rubber mounting pad (1) Stainless steel screw kit *Sold as an Individual Specifications: Bulb Type: LED Dimming: Yes Housing: White LED Color: Blue Box Dimensions: 3"H x 4"W x 4"L WT: 0.35 lbs UPC: 860470002290

Read more less

Value Fit Mini 6 LED Flood Light Bar - WhiteFeatures: 6 High Intensity LEDs Die-Cast Aluminum Housing Adjustable Stainless Steel Bracket Calculated/Raw Lumens: 1080lm Measured Lumens: 800, 18W 10-30 VDC Dimensions: 6.3"W x 1.8"H x 2.5"D/160 x 45 x 88mm Specifications: Voltage - Input Range (Volts): 12/24v Length (Inches): 6" Housing: White Beam Pattern: Flood Box Dimensions: 4"H x 4"W x 8"L WT: 1.15 lbs UPC: 760687161561

Read more less

Port Navigation Light - Incandescent - 2nm - Black Housing - 12VInternationally approved navigation lamps. Non-magnetic and saltwater resistant. Housing 'snaps' to base without screws.2984 series navigation lamps feature a vertically hanging bulb and contacts in the upper area of each lamp to prevent corrosion.Specifications: Material Description: UV and impact resistant plastic housing and lens Minimum Visible Distance: 2 Nautical Mile Bulb: 12V / 25W BAY15d included Installation: Vertical surface mount Cable Entry: Through base plate with rubber grommet Degree of Protection: IP 55 Approvals: IMO Col Reg 72, USCG, ABYC A-16, Maritime NZ Specifications: Lens Color: Red Visible Range (Miles): 2nm Housing: Black Voltage - Input Range (Volts): 12v LED: No Box Dimensions: 4"H x 6"W x 8"L WT: 0.8 lbs UPC: 9002920130547

Read more less

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - Stainless Steel Bezel - 12VAttractive, energy efficient lighting for interior and exterior use.Hella Marine round LED courtesy lamps can be installed almost anywhere on board.Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer. Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable) Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Stainless LED Color: White Dimming: No Box Dimensions: 2"H x 4"W x 8"L WT: 0.3 lbs UPC: 9416325177616

Read more less

SeaBlaze Mini Underwater Light - Pair - Brushed Finish - Blue Non-DimmingThe diminutive SeaBlaze Mini packs a surprising punch! SeaBlaze Mini leverages many of the technologies utilized in the world's most popular underwater light, the SeaBlaze3, to ensure years of trouble free service. With an actual MEASURED output of more than 700 lumens, there is simply no better value in underwater lighting. Perfect for smaller trailer boats, skiffs, or dinghies. Sold as a pair.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 990mA 24V DC Amps: 450mA Correlated Color Temperature: N/A Color Rendering Index: N/A Rated Watts: 12 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 2.98" (7.57cm) Height: 2.98" (7.57cm) Depth: 0.58" (1.48cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Surface Color: Blue Material: Anodized Aluminum Watts: 12w Voltage - Input Range (Volts): 10-30v Box Dimensions: 4"H x 4"W x 6"L WT: 1.1 lbs UPC: 089300012463 Quick Guide (pdf)Brochure (pdf)

Read more less

Ember E1150Z Snap-In - Polished Chrome - Round - Warm White LightProduct Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces Specifications: Dimming: Yes Bulb Type: LED LED Color: Warm White Voltage - Input Range (Volts): 9-30v Housing: Chrome Box Dimensions: 3"H x 3"W x 3"L WT: 0.2 lbs Brochure (pdf)

Read more less