Bracket Mount LED Spreader Light - WhiteScandvik's bracket-mount LED Spreader Light is the perfect solution to illuminate your deck or cockpit. Featuring five daylight white 3W LEDs providing 900 effective lumens, A white Zytel® composite housing was designed specifically for the rigors of the marine environment. Features:
An adjustable stainless steel bracket mounting solution allows the light to be aimed where it is needed most
Guaranteed against corrosion, discoloration, and water intrusion
Comparable to a 120-watt Halogen bulb.
12/24 volts (8-30 volts)
UV-resistant Zytel® Nylon Resin housing
Polycarbonate Lens
IP68
*The "P" within the part number indicates retail packaging Specifications:
Bulb Watts: 3
LED: Yes
Box Dimensions: 3"H x 7"W x 8"L WT: 0.5 lbs
UPC: 786142414409
E360 Engine Room Light - 12V - Cool WhiteThe E-3600 is a surface-mounted engine room light. The impact-resistant PC lens allows the wires to exit straight back through the mounting surface or be routed to the side through the end cap. Featuring a total of 36 LEDs, this fixture produces 1,154 lumens, comparable to a 160-watt standard bulb. Drawing a mere 1.1 Amps at 12V, this fixture is often used in multiple quantities to eliminate any dark spots in the engine room.Features:12 Volt, 13.2 WattSurface Mount (hardware included)
Specifications:
LED Quantity: 36 (4 rows of 9 LEDs)
Lumens: 1,154
Protection: IP65
LED Type: SMD5630 cool white (5,500K-6,300K)
Beam Angle: 180°
*The "P" within the part number indicates retail packaging Specifications:
Bulb Type: LED
Housing: Clear
LED Color: Cool White
Voltage - Input Range (Volts): 12v
Box Dimensions: 2"H x 5"W x 17"L WT: 0.85 lbs
UPC: 786142413884
Tortuga Dimmer - 12/24VThe Tortuga Dimmer is designed to easily adjust the interior or exterior light level from 0-100% output. Touch the "up" button to turn the light on, and touch the "down" button to turn the light off. Press and hold either up or down on the included switch to increase or decrease the light output level to your liking. Release it at any point to maintain the current brightness.If users are leaving the boat, the Tortuga features an exit mode. Push the "down" button two times within 1.5 seconds, and the light will flash twice and turn off after 1 minute.Features:
The Tortuga is pulse width modulated, so it will work with LED, incandescent, or halogen lights
It is also rated for 12V or 24V
Die-cast aluminum housing
IP66
10-30VDC
Rated for 8A
Includes switch
*The "P" within the part number indicates retail packaging Quick Guide (pdf)
Gen3 Warm White, RGBW Full Color 3.5” IP65 Recessed Light with Polished Stainless Steel Bezel - 12VDCIndoor / Outdoor Recessed 3.5” LED Light 2700K, 85 CRI Dimmable COB & RGB Color LEDThe newest generation Lunasea LED RGBWW recessed light. The same great warm white high output light of our LLB-46 line with the addition of full color mixing. The Red, Green and Blue LED’s are high power not the typical low power found in other products. Color mixing requires RGBW controller. IP65 for Indoor or Outdoor use.Use with our dimmers: LLB-45WW-91-00, LLB-45WB-91-00, LLB-45WZ-91-00, LLB-45WG-01-00, LLB-45WR-91-00.Features:
High Output Warm White & Full Color
480 Lumen, 2700K Warm White equal to 40W
IP65 Indoor/Outdoor
Specifications:
Voltage - Input Range (Volts): 12/24/32v
Housing: Stainless
Dimming: Yes
Bulb Type: LED
LED Color: RGBW
Box Dimensions: 2"H x 7"W x 8"L WT: 0.4 lbs
UPC: 850001461009
Brochure (pdf)
Wall Mount with Touch Dimming & Rotating LightBeautiful 3 watt wall fixtures put out the light! Built-in touch dimming switch also produces a soothing blue glow. The main LED produces a warming light that will really light your cabin or dim to read by. Simply touch the switch and hold until you reach desired lighting. Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12/24v
Housing: Brushed
LED Color: Warm White
Dimming: Yes
Box Dimensions: 4"H x 6"W x 8"L WT: 0.67 lbs
UPC: 854760002305
S1R Ultra Thin Solar Light - RedProven Hurricane Tough!Specifications
Body Material: High Impact Polycarbonate
Power Supply: U.S.A made High Efficient Solar Panel
Battery: Lithium Ion 3.7v/340mah
LEDs: 6 F3 LEDs
Color: Red
Visual Distance: 500M
Working Temperature: -20c (-4F)
Life Expectancy: 5 Years
Waterproof: IP68 Totally Submersible
Size: 4.5" x 3.5" x .4"
Warranty: 2 years
Quick Guide (pdf)
35W Slimline LED Floodlight, 12/24V, Cool White, 4800 Lumens, 3' Cord - White HousingLunasea LED food light is both bright and ultra thin. Available in both 12W and 35W. Sleek design It's anywhere while offering bright soft light output with a color rendering of >80CRI. Beam angle of 110 degree great for area lighting. Includes Stainless Bracket and Hardware, Tempered Glass, Breather Valve, completely sealed without the use of gaskets. Bright meets beautiful. Specifications:
Power: 35W
Voltage Range: 12/24V
Output: 4800 Lumen, 5700K, >80CRI
Dimensions: 211 (8.3”) W x 165 (6.5”) H x 39 (1.5”) D
Specifications:
Bulb Watts: 35w
Voltage - Input Range (Volts): 12/24v
LED: Yes
Box Dimensions: 7"H x 7"W x 12"L WT: 1 lbs
UPC: 850001461061
Brochure (pdf)
Navilight Tricolor 2NM with Suction BaseThe Navisafe suction mount light "Navilight Tricolor 2NM" combines two successful Navisafe products into one - the Navi light TriColor 2 NM and the Bendable Suction mount.The Navilight Tricolor 2NM is the ready to go Navigation light solution to be securely mounted on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat. Furthermore the suction cup can be used to hold a GoPror camera (Hero / 2 / 3) when no light is needed - the mount is fully compatible!Features:
USCG Approval, 2 Nautical Miles
5 Modes: TriColor Masthead light (135° white, 112,5° red, 112,5° green), BiColor side light, red side light, green side light, white Sternlight
Includes dual function suction mount - holds Navi light TriColor S or GoPro®/Action camera or any other accessory utilizing the mounting bracket
Floats light facing up
Submersible to 20 m
Corrosion resistant
3M VHB self-adhesive "landing pad" to securely attach the light on abrasive surfaces
3M VHB self-adhesive curved "landing pad" to securely attach the light on inflatable boats
Powered by three AAA batteries (not included)
Neoprene stow away bag
Size: H = 95 mm, O = 68 mm
Weight (net): 141g
Mounting SystemThe Navilight Tricolor differs from the Navilight Tricolor through its mounting system - while the TriColor is supplied with the Navisafe magnetic mounting system the Navilight Tricolor S is directly fixed to a suction cup mount. The Navilight Tricolor S can be easily mounted on all flat and smooth surfaces like the outboard engine, the steering console, the windshield or any place on the hull where the lights are seen best. Navisafe supplies a 3M VHB self-adhesive "landing pad" to securely attach the light on abrasive surfaces and a curved "landingpad" to attach the light on inflatable boats.*Please note: Suction mounts are most suitable for short-term mountings - changes in temperature and humidity may make them lose their grip. Specifications:
Voltage - Input Range (Volts): 3 AAA Batteries (Not Included)
LED: Yes
Housing: Black
Visible Range (Miles): 2nm
Lens Color: White/Red/Green
Box Dimensions: 3"H x 4"W x 9"L WT: 0.6 lbs
UPC: 814154018671
Navimount Horizontal Black with ScrewsThe Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.Includes:
Horizontal Mount
Two self tapping stainless steel screws
Specifications:
Type: Mounting Brackets
Box Dimensions: 1"H x 3"W x 5"L WT: 0.2 lbs
UPC: 814154018978
LightArmor Vertical Surface Mount Navigation Light - Port (red) - Stainless Steel - 2NMTechnology that lights the way. Premium, LightArmor LED Navigation Lights meet today's global regulatory compliance.Introducing LightArmor LED Navigation Lights, a new line of streamlined surface mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.*LED Light Engine
Cool to the touch
Long lasting - 50,000+ hours
Color indicated cores for ease of installation
Be Safe, Be Seen
Sharper cut-off angles and vibrant starboard and port colors for better visibility
2 NM U.S.C.G. Certified
Corrosion Resistant
Water-Resistant (IP Rating 67)
Features tell-tale indicators for ease of use
Smaller footprint with refined styling
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Housing: Stainless
Lens Color: Red
Visible Range (Miles): 2nm
Voltage - Input Range (Volts): 12v
LED: Yes
Box Dimensions: 3"H x 5"W x 7"L WT: 0.2 lbs
UPC: 022697013699