LED Brass Reading Light - 10-30VThis is a polished brass LED cabin and reading light.Features:
12/24V
Adjustable swivel light
On/off rocker switch
8-30 VDC, 3.1 Watt
16 SMD 2835 warm white LEDs
154 lumen
120° Beam angle
*The "P" within the part number indicates retail packaging Specifications:
Bulb Type: LED
Housing: Brass
LED Color: Warm White
Voltage - Input Range (Volts): 12/24v
Box Dimensions: 3"H x 6"W x 8"L WT: 0.55 lbs
UPC: 786142190525
White LED Micro Light with Stainless Steel Bezel & Vertical MountThis Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail. Features:
0.66-watt draw at 12 volts DC
White LEDs
Rated for 50,000+ hours of use
Specifications:
Bulb Type: LED
Housing: Stainless
LED Color: White
Voltage - Input Range (Volts): 12v
Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs
UPC: 022697463500
Quick Guide (pdf)
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Warm White LED - Stainless Steel Bezel - 12VAttractive, energy efficient lighting for interior and exterior use.Hella Marine round LED courtesy lamps can be installed almost anywhere on board.Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer. Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12v
Housing: Stainless
LED Color: Warm White
Dimming: No
Box Dimensions: 2"H x 4"W x 8"L WT: 0.3 lbs
UPC: 9416325179849
Surface Mount Oblong LED Courtesy Lamp - Red LED - Stainless Steel BezelOblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread.Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes.Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry.Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included.Specifications:
Lens Material: UV and enhanced impact resistant Grilamid
Rim Material: 316 stainless steel
Cable: Pre-wired with 120mm of marine cable
Operating Voltage: Multivolt 12 / 24V DC
Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 35g (including cable)
Approvals: CE
Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12/24v
Housing: Stainless
LED Color: Red
Dimming: No
Box Dimensions: 2"H x 4"W x 6"L WT: 0.15 lbs
UPC: 9416325233985
Brochure (pdf)
FL50 50W/120VAC Flood Light - GreenHydro Glow Fishing Lights manufactures high quality, energy efficient, water proof lights for both above the water and underwater applications. Hydro Glow Fishing Lights utilize high output LEDs for great fish attracting capability. The fish attracting capability of our high output LED dock lights will enhance fishing, and just watching fish, right off your dock for the entire family. Factors such as water depth, clarity, boat traffic, and the desired appearance of the illuminated area should be considered when choosing the best suited dock light.The FL-50 is an "above the water" style light. The FL-50 LED floodlight is designed with a more focused beam than the DM260. This model is recommended for docks high off the water or where water conditions is stained or not very clear. The FL-50 features a focused light beam to provide greater depth of penetration. The FL-50 is 120v and comes with a 10' cord. The size of this model is about 8 inch x 8 inch in size. The FL-50 comes in green color to maximize fish attraction. With only 1/2 amp draw and 50w you can easily run several lights on a single circuit. Specifications:
Bulb Watts: 50
Voltage - Input Range (Volts): 120
LED: Yes
Box Dimensions: 5"H x 9"W x 10"L WT: 5 lbs
UPC: 814347000513
Green Starboard Light - 2NM - Silver Housing with FB BaseThis green starboard light has a silver housing, is horizontally mounted, and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile. Features:
Silver anodized aluminum housing
2.5m cable is included
Specifications:
Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR
Mounting: Horizontal
EAN: 5704438043664
Min. Feed Wire Gauge: 0.5mm2 AWG22
Light Color: Green
Visibility: 2NM
Included In the Package: 1 Navigation light, pre-cabled with 2.5 meters shielded marine grade cable and installation guide
Materials: Silver anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane
IP rating: IP68
Connection: 2.5m cable
Current Consumption (mA @ 24VDC): 60
Current Consumption (mA @ 12VDC): 110
Dimensions Metric: Ø92.5mm x 36mm
Dimensions Imperial: Ø3.6" x 1.4"
Operating Temperature: -25 degrees C to 55 degrees C
Operating Voltage: 10-32VDC
Power Draw (W): 1.4
Vessel Size: Under 12 meters, 12-20 meters, and 20-50 meters
Specifications:
Housing: Silver
Visible Range (Miles): 2NM
Voltage - Input Range (Volts): 10 - 32
Box Dimensions: 3"H x 3"W x 3"L WT: 1.4 lbs
UPC: 879343043797
Quick Guide (pdf)
PowerBase Light - Automated Light MountThe intelligent, automated folding light base. PowerBase easily stows and deploys lights and antennas with the push of a button.PowerBase is the only intelligent light/antenna with object detection technology:
SafeGuard Breakaway: In the event of an impact, the powerbase will safely return to a stowed position preventing potential damage to the fiberglass top
SmartDeploy Backdrive: In the event of a blocked deployment, PowerBase senses an obstruction and reverses the light/antenna back to its starting position
PowerBase is designed for worry-free installation and operation from the assembly line to the marina:
Standardized mounting patterns allow for upgradeability
Intuitive control without switch limitations
PowerBase is compatible/built with the leading industry equipment:Available in masthead and all-round configurations featuring Attwood’s LightArmor LED technology (PowerBase Light)Compatibility:Compatible with Attwood LightArmor LED All-Round and Masthead Nav LightsRequired for installation (not included):
7/32” & 3/4” Drill Bits
#2 Phillips Driver
Marine Grade Sealant
PTFE Lubricant
2x 1-1/4” Fender Washers and 10-24
Nuts (If Through-Hole Mounting)
2-Position SPST Switch (with LED Backlight)
PowerBase Light not included
Quick Guide (pdf)Owner's Manual (pdf)
1-Mile Deck Mount, Green Sidelight - 12V - Stainless Steel HousingPart #: 66319G7Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Each light provides 1-mile, 112.5 degree light visibility.Features:
7" Wire Lead
12V
Stainless Steel Housing
Green
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: Green
Visible Range (Miles): 1nm
Housing: Stainless
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 3"H x 5"W x 5"L WT: 0.3 lbs
UPC: 022697008916
Quick Guide (pdf)
10" Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0Thin, sleek, and stealthy, the single-row series 10-inch single-row light bar packs an enormous amount of power into a single row of intense LED light! Using the best-performing LEDs on the market, this thin LED light bar will quickly become a light user can not live without. With its IP69K rating (the highest rating possible), this light will last through the most intense conditions. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Combination Flood/Spot light pattern offers a superior lighting pattern
Activities & Uses:
Perfect duck boat bow light
Spotlight
ATV or UTV bumper lights
Front bumper truck lights
Technical Specifications:
Total Wattage: 50W
Amp. Draw: 3.3
LED Quantity: 10
Weight: 4.2 lbs.
Raw Lumens: 6,600
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 13" x 2.6"
In the Box:
10” light bar
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware is ready to install
*Sold as an Individual Specifications:
Beam Pattern: Spot-Flood Combo
Housing: Black
Length (Inches): 10"
Voltage - Input Range (Volts): 12v
Box Dimensions: 4"H x 7"W x 15"L WT: 4.25 lbs
UPC: 850079763074
D-Series PRO Hybrid-Flood LED - Pair - BlackThe D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.Features:
Optics: Hybrid - Flood
Color: White
Finish Color: Black
Mount Type: Surface
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.3lb
Sold As: Pair
Hybrid Optics
20° Flood Pattern
50,000+ Hr LED Lifespan
Instant On / Off - No Warm Up
RoHS Compliant
Over / Under Voltage Protection
Cast Aluminum Housing
Durable Polycarbonate Lens
Integrated Thermal Management
GORE® Pressure Equalizing Vent
Designed, Engineered, & Assembled in the USA
Sealed Deutsch Connector
Specifications:
Watts: 30
Amp Draw: 2.14
LED's: 4
Raw Lumens: 3168
Lux @ 10M: 58.19
Beam Distance: 76.3M
Peak Beam Intensity: 5819 cd
Specifications:
Bulb Watts: 30w
LED: Yes
Box Dimensions: 7"H x 7"W x 9"L WT: 3.6 lbs
UPC: 849774026935
Brochure (pdf)
Wire Harness f/4"-6" Light BarThis 11' wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Single), D2 (Single), 4" E-Series, 6" E-Series, 4" SR-Series, 6" SR-Series.Features:
18 AWG Wire
Deutsch Connector
Inline Fuse Holder
2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them!Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features:
Spreader light
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Spreader Light
Aft deck fishing lights
Foredeck lights
Accent lighting
Game fishing lights
Boat wake lights
Technical Specifications:
Total Wattage: 20W
Amp. Draw: 1.4
LED Quantity: 2
Weight: 0.7 lbs.
Raw Lumens: 1560
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”
Mounting Holes: 3-1/2” apart horizontally
In the Box:
2” marine white spreader light
Wiring pigtail
Stainless steel mounting kit
*Sold as an Individual Specifications:
Bulb Watts: 20
LED: Yes
Box Dimensions: 4"H x 5"W x 5"L WT: 0.85 lbs
UPC: 860470002276