Lighting

Caprera3 Spreader Light - White/Red Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

12V LED Bi-Color Navigation Light - BlackFeatures: High tech, self-contained LED modules New stylish designs: Classic or Rounded Variety of top options: Plain or Stainless Steel Standard Colors: Black or White 2-Mile (USCG 2nm) Certified Meets global specifications for EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU & USCG 33 CFR - 2nm Specifications: Voltage: 12 Volt LED Amperage: 0.21 amps Wattage: 2.5 watts Screw Size: #6 P.H.

Read more less

12V LED Bi-Color Navigation Light - Black/Stainless SteelFeatures: High tech, self-contained LED modules New stylish designs: Classic or Rounded Variety of top options: Plain or Stainless Steel Standard Colors: Black or White 2-Mile (USCG 2nm) Certified Meets global specifications for EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU & USCG 33 CFR - 2nm Specifications: Voltage: 12 Volt LED Amperage: 0.21 amps Wattage: 2.5 watts Screw Size: #6 P.H.

Read more less

OceanDMX RC Explore XFM Dual 915MHzThe OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colours only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual Quick Guide (pdf)

Read more less

Apelo A1 Blue White Underwater Light - 1800 Lumens - Black Housing - White LensTurn up the party, select the mood, switch on the fish magnets. Apelo underwater lighting brilliance by Hella Marine lets you do it all. Select between incredibly intense white or vibrant blue for amazing illumination experiences. Take complete control and choose any color you wish with Apelo RGB.Features: Intense white and vibrant blue illumination, or select Apelo RGB for complete control of the color spectrum Optical Intelligence: Wide horizontal illumination with a narrow vertical angle for a spectacular effect Corrosion-resistant thermal polymer housing and Grilamid high strength nylon lens Completely sealed and electronically protected Robust surface mount design Advanced thermal management ensuring ongoing protection and no damage by operation out of the water Charcoal or white lens Suitable for hulls of any material Specifications: Color: White/Blue Material: Plastic Mounting Style: Surface Voltage - Input Range (Volts): 12/24 Box Dimensions: 4"H x 4"W x 6"L WT: 1 lbs UPC: 4082300823196 Brochure (pdf)

Read more less

Series 200-018 - Navigation Light - 2NM - Vertical Mount - Green - Silver HousingLopolight started out back in 2004, offering many solutions and neat combinations for all size boats and yachts. The tradition continues. Lopolight offers a full range of navigation lights dedicated for boats and yachts, resulting in an elegant,  compact and precise solution with good value for money.  Features:Single light - NavigationTechnical Specifications: Visibility - 2NM Vessel size - Up to 164' (Up to 50M) Operating Voltage - 10 - 32 VDC Number of LED Bulbs - 1 Light Color - Green Mounting - Vertical Materials -  Anodized aluminum Connection - 19.69' (6M) cable  IP rating - IP68 Weight - 9.49oz (.27kg) Certifications: U.S.C.G. EN14744 COLREG72 In the Box: Navigation light w/19.69' (6M) cable  Mounting hardware Installation guide *Sold as an Individual Specifications: Voltage - Input Range (Volts): 10 - 32 Visible Range (Miles): 2NM Lens Color: Green LED: Yes Housing: Silver Box Dimensions: 4"H x 4"W x 5"L WT: 0.8 lbs UPC: 879343020538 Quick Guide (pdf)Brochure (pdf)

Read more less

Poco Digital Lighting Control 3.0Poco Digital Lighting Control is a low-cost, easy-to-install, and set up onboard digital lighting control system that offers full dimming and color control over all your Lumitec PLI-enabled lights at the touch of a button via any compatible MFD or connected smart device. Poco 3.0 adds enhanced wireless security, an external API for compatibility with networked third-party automation systems, and a "Triggers" feature which allows for the triggering of Poco virtual switches by external inputs - all packaged within a responsive user interface for better mobile device usability.Features: PWR: Positive 10-30 VDC POCO supply power. Line must be fused prior to connecting to POCO with 3 Amp ATC blade fuse or equivalent (Constant ON or Switched with ACC Line) GRND: Negative 10-30 VDC POCO supply power ACC: Positive 10-30 VDC, Low current enable line to turn POCO on from remote device (i.e. MFD) (Must be powered to enable Poco) 1-4 IN: Channel Input power. Line must be fused prior to connecting to POCO with 10 Amp ATC blade fuse or equivalent (14 AWG 300V 16 inch long cable) 1-4 OUT: Channel Output power to the lighting circuit. Maximum 10 Amp load per channel. The maximum total load across all channels is limited to 40 Amps. Load on the channel must be only one of the following (Lumitec PLI enabled lighting/lighting capable of dimming (through PWM) / device requiring a standard ON-OFF circuit) (14 AWG 300V 16 inch long cable) LAN: Local Area Network connection. 10/100 Base T data connection to POCO. Standard CAT-5 cable with RJ45 connector required to plug into sealed network cable adapter. (18 inch long cable with Link light) POWER: Indicator - Illuminates Green if POCO is powered on, both PWR and ACC lines must have supply voltage between 10 and 30 VDC CH1-4: Indicator - Illuminates Red if power is supplied to Channel from fuse/breaker panel: - Illuminates Green if power is supplied to Channel input and the channel is turned on inside of POCO controller; PLI enabled lights may be OFF: - Flashes Orange if PLI data is transmitted: - Illuminates Orange if the channel is dimmed through a PWM signal. STATUS: Green blinking light indicates WiFi connection status: - 0 blinks: WiFi disabled - 1 blink: WiFi-enabled but not connected to any peers - 2 blinks: WiFi is connected to one or more peers Blue blinking light indicates Bluetooth-LE connection status: - 0 blinks: Bluetooth-LE is disabled - 1 blink: Bluetooth-LE enabled but not connected - 2 blinks: Bluetooth-LE is connected Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Industries Radiance Plus SR-Series 40" LED Backlight - RGBWThe versatility of the RIGID Radiance lighting family got even better with the introduction of the Radiance Plus SR-Series. RIGID’s RGBW LEDs provide the user with the ability to toggle between eight available backlight options with the flip of a switch: Red, Green, Blue, Light Blue, Purple, Amber, White, or Rotating. The RIGID Radiance Plus SR-Series single-row LED light bar is the perfect solution for those who want RIGID’s legendary quality at a level everyone can attain. Utilizing RIGID’s LED technology, the Radiance Plus light bars feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand. The Radiance Plus SR-Series LED light bars are built with the same sleek low-profile high-grade aluminum alloy housing as the legendary SR-Series, but that’s where the visual similarities end. Inside, the Radiance SR-Series is feature-packed, with a black exposed circuit board, optimized forward projecting Broad Spot optics, prominent RIGID branding plates, and RGB LEDs with seven backlight colors. The RIGID Radiance Plus SR-Series light bar is for the customer who wants a truly custom look, making it easier than ever to Own the Night.Features: 8 Back Lighting Options: Red, Green, Blue, Light Blue, Purple, Amber, White, or Rotating Fits all existing SR-Series mounting options Same Construction as RIGID’s SR-Series Fits All SR-Series Light Covers and Mounts Black Exposed Printed Circuit Board 10 Year Warranty 9-15 V DC Back Lighting is Independently Controlled Using Switch Logic Black Powder Coat Finish Pressure Equalizing Vent IP68 Compliant - Dust/Water Ingress High Grade Aluminum Alloy Housing and Heat Sink Over/Under Voltage Protection High Impact Polycarbonate Lens RFI/EMI Protection RoHS Compliant Off-Road Use Only Specifications: Size: (inch) 40” Weight: (Lbs) 15.0 Optics: Broad Spot Watts: 197 Amp Draw: 14.8 Raw Lumens: 22848 Lux at 10m: 2800.68 Beam Distance at 1Lux: 529.2 Beam Distance at .25Lux: 1058.45 Horizontal Beam Angle: 24 Included:  40" Lightbar Mounting brackets Included *Wiring harness and switch sold separately

Read more less

Adapt XE & XP Magnetic Reed Switch Power ClipThe RIGID Adapt XE Magnetic Reed power clip is used for additional power customization.  Leaving the switch in place limits the light to consuming a maximum of 2.7 amps.  When the switch is removed the light will consume up to 5.6 amps when all zones are activated on your Adapt XE LED dirt bike light.*Sold as an Individual Specifications: Type: Cables Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 815711018592

Read more less

Adapt XP - PairThe RIGID Adapt XP has a signature look that is unlike any other off-road LED light on the market.  Feature-packed with the most advanced patented technology, this light features a high-strength aluminum heat sink and an impact-resistant polycarbonate lens.  On the inside, the Adapt XP contains cutting-edge technology.  The Adapt XP takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions.Features: 3 Optic Zones - Scene, Driving, Spot Seamless Beam Transition Slow, Moderate & High-Speed Beam Patterns Two Layers of Adaptive Response Active Power Management System - Power Capacity Sensing  Internal GPS Module 9-32 VDC Patented Optics Technical Specifications: Impact Resistant Polycarbonate Lens Durable UV Polyester Powder Coat • Universal Fit Operating Temp -22F to +158F/-30C to +70C 9-32 VDC 50,000 Hour+ LED Lifespan In the Box: Pair of Adapt XP lights Mounting bracket and Hardware Amber Light Covers Installation Manual *Wiring Harness Sold Separately  Specifications: Voltage - Input Range (Volts): 9 to 32 V LED: Yes Bulb Watts: 12/80 Box Dimensions: 6"H x 9"W x 17"L WT: 8.1 lbs UPC: 815711017946 Brochure (pdf)

Read more less

DLX Series Down Light - Black Housing - Full-ColorThe Shadow-Caster® Large Down Light (SCM-DLX) is perfect for lighting overhead areas of the interior and exterior of your boat or yacht. At 3” overall diameter, its wide-angle spread of light and all-glass reveal makes this the ideal light for T-Tops, cabins, towers, and more. The SCM-DLX series is available in 3 light output choices; single color white, 3 colors (white, blue, and red) as well as a full-color version. Choose from three beautiful color finishes – white, black and polished chrome. Easily control the brightness and color from a standard switch.Features: Soft start technology ramps the brightness up gently over 2 seconds Power toggle feature to set brightness and change color True white LED for best color performance 120-degree viewing angle High-efficiency switch mode power supply Waterproof low-profile aluminum housing White, black, or polished chrome finish All-Glass reveal provides a modern look Specifications: 300-lumen output 120-degree beam angle 3-watt power draw 10-30 volts Input 250mA at 12 volts, 125mA at 24 volts 6200 Kelvin cool white color temperature 3” (76mm) OD, 0.175” (4mm) mounting height 2” mounting hole IP67 waterproof design Durable glass lens Color change version includes Shadow-NET® interface for control Includes: Down light Flush-mounting bracket and (3) #4 X 0.5” SS316PH screws Quick start guide Standard 2 year warranty

Read more less

SCM-SL Series Flush Mount Spreader Light - White Housing - White/Blue/RedThe Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

Read more less