Lighting

2013-2018 RAM 1500 Bumper Mount for 30" Lightbar - Black2013-2018 Dodge RAM 1500 Bumper Mount - Urethane bumper only. Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar. Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar ∗ Lights sold separately Brochure (pdf)

Read more less

2018+ Ford F-150 Hidden Grille Mount f/6" Lightbar - Black2018+ Ford F-150 Grille Mount, fits any two (2) 6" SR-Series, 6" SAE, or 6" Midnight SR-Series RIGID LED light bar. Features: Agrressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any (2) 6" SR-Series, 6" SAE, or 6" Midnight SR-Series RIGID LED light bar ∗Lights sold separately Brochure (pdf)

Read more less

12V Converter Module for Perko LED Combination Masthead/Anchor Lights This module is designed to allow the installation of a Perko LED combination masthead/all round light as an upgrade to an existing incandescent combination masthead/all round light without rewiring the original incandescent switching arrangement of the boat navigation light system.Wiring Note: Because direct wire-to-wire substitution of an older style incandescent light with this new style L.E.D. light will not work, there are two installation alternatives: Rewire the existing switch to match the diagram supplied in the L.E.D. light instructions or, Use the optional converter module (Cat. No 1680DP012V) and follow the wiring in the instructions provided with the new L.E.D. light so that no rewiring of the switch is necessary. Owner's Manual (pdf)

Read more less

LED Utility Light White with White Faceplate These LED Utility Lights are constructed of injection molded Delrin for strength, heat resistance, and dimensional stability. Comes standard with low amp draw white LED bulbs. Surface mounts with four #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: White LED Color: White Dimming: No Box Dimensions: 2"H x 4"W x 6"L WT: 0.1 lbs UPC: 035514403474

Read more less

2007-2017 Jeep JK 20" Light Hood MountAll of RIGID’s grilles, OE Brackets, and Mounts are made with 100% stainless steel and covered with UV and abrasion resistant powder-coat to ensure years of use in the harshest conditions. Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware ∗ Lights sold separately

Read more less

Color-Changing White, Blue & Red Dimmable - White Powder Coat Down LightShadow-Caster’s line of above water marine lights, the SCM-DL Down Light is perfect for lighting overhead areas in the interior and exterior areas of your vessel. Ideal for lighting T-Tops, cabins, and more, the SCM-DL offers a wide spread of light available in multiple colors and varieties. All Down Lights are built into high-quality, powder-coated white housing and include a bracket and hardware for flush mounting,  and include a full install diagram. Features: Thin Design (.175” thick) 2” Outside Diameter (1 ¼ “ Mounting Hole) 250 Lumens 10-40 Volts Input 3 Watts Includes Bracket and Hardware for Flush Mounting Option Install Diagram Shadow-Net Enabled 2 Year Warranty Made in the USA Specifications: Dimming: Yes Housing: White LED Color: White/Blue/Red Box Dimensions: 3"H x 3"W x 4"L WT: 0.15 lbs UPC: 8557260057296

Read more less

Barbados Courtesy Accent LED Light - Black with Red LightOriginally engineered for military application, our robust, high-output Barbados light is popular with marine and industrial customers alike because of its amazing performance and clean lines. Extremely durable composite housing. Smooth rounded profile to avoid snagging pant cuffs, lines, or clothing, Barbados is the ideal for lighting toe kicks on stairwells and deck steps.Specifications: Lumens (White): 45 Voltage: 10-16V DC 12V DC Amps: 45mA 24V DC Amps: N/A Rated Watts: 0.55 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to +131/55 Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Height: 1.28" (3.25cm) Width: 1.81" (4.60cm) Depth: 0.52" (1.33cm) Diameter: N/A Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Black LED Color: Red Dimming: Yes Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs

Read more less

Contour Series Inset Navigation Light - Starboard GreenContour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern.Features: Output: Starboard Green  Visibility: USCG2NM Voltage: 10-30V DC 12V DC Amps: 18-26mA 24V DC Amps: 12-15mA Conforms to: ABYC A16 Specifications: Housing: White Lens Color: Green Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 1"H x 3"W x 3"L WT: 0.1 lbs UPC: 089300015754 Brochure (pdf)

Read more less

Razor 18" Light Bar - Flood - Flush Mount - WhiteThe World’s FIRST flush-mount light bar. Razor was carefully designed to be easily integrated into most existing hardtop, arch, and pilothouse designs – typically with little or no modification to production tooling.Razor is designed to drop into a contoured pocket molded into a hardtop, radar arch, brow, or other surface. Alternatively, use Razor’s surface mount kit for a sleek, low profile installation on existing flat or slightly crowned tops. Mount forward or aft, horizontal or downward facing. In all installations Lumitec’s careful thermal analysis and self-venting design puts an end to ‘pod’ mounted lightbars, which can overheat and damage surrounding composites in hard tops. Flood and spot/flood beam patterns ensure the light goes where you need it.Advanced Thermal ManagementRazor has been designed and analyzed as a complete system – with careful consideration of the top in which it is mounted. This means that Razor delivers maximum performance while protecting hardtops and pods from dangerously high temperatures.80% Lower Profile Than Most Other Light Bars On The MarketRazor’s integrated design delivers more power with a cleaner, more streamlined look. Up to 80% more streamlined in fact. As the images to the right demonstrate Razor allows builders to eliminate light pods which must be molded and added separately, saving many hours of costly finishing labor. Razor simply drops into an as-molded recess. CAD models of mold plugs or tooling inserts may be provided upon request.Features: 10,000+ TRUE lumens output Surface mountable on top or inverted Dimmable with no additional dimmer switch required Available with two beam patterns (spot or flood) Low profile (1.5") with sleek streamline design Powder-coated die-cast aluminum construction Voltage: 10-30V DC Dimensions - 17.8" Length x 1.5" High x 3.5" Depth Specifications: Beam Pattern: Flood Housing: White Length (Inches): 18" Voltage - Input Range (Volts): 12/24v Box Dimensions: 6"H x 6"W x 26"L WT: 3.9 lbs UPC: 089300015860 Brochure (pdf)

Read more less

Contour Series Inset Navigation Light - Port RedContour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern.Features: Output: Port Red Visibility: USCG2NM Voltage: 10-30V DC 12vDC Amps: 18-26mA 24vDC Amps: 12-15mA Conforms to: ABYC A16 Specifications: Housing: White Lens Color: Red Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 3"H x 3"W x 3"L WT: 0.1 lbs UPC: 089300015747 Brochure (pdf)

Read more less

Contour Series Inset Navigation Light - Stern WhiteContour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern.Features: Output: Stern White Visibility: USCG2NM Voltage: 10-30V DC 12V DC Amps: 18-26mA 24V DC Amps: 12-15mA Conforms to: ABYC A16 Specifications: Housing: White Lens Color: White Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 2"H x 4"W x 4"L WT: 0.6 lbs UPC: 089300015761 Brochure (pdf)

Read more less

2018 Jeep Wrangler JL Cowl Mount Tall Standoff KitCompliment your RIGID Jeep Wrangler JL Cowl mount with the tall standoff mounting option for adding a 2nd pair of lights.  Used in combination with Wrangler JL Cowl Mount P/N 41656.These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL. Lights sold separately. In the Box:All Necessary Hardware∗ Sold as a Pair

Read more less