Marine Hardware

Power-Rise Adjustable Sit-Down Post - Stainless SteelStainless Steel Pedestal, Adjusts From 15″ To 21-1/2″ Use As Seat Or Leaning Post. 3 Degree Tilt Cast Aluminum Swivel, Rotates 360°. Use With Any Non-Locking Spring-Lock™ Base (sold separately).Rated ABYC Class H-31 B (Fishing Only) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Sliding Door Latch - Square - AluminumFeatures: Allows for 100 - 150mm (4”- 6”) more door travel than traditional sliding-door lock styles Safety lock prevents the door from being locked from the inside. To activate: turn the key clockwise and remove Shipped with striker and two keys Locks can be matched to other SOUTHCO® deck latches Color/Appearance: Bright Access Restriction: Key Locking Sealed: No Gasketed: No Door Thickness Range: 10.000-12.700mm (0.39-0.50") Profile: Flush Operation: Sliding Door

Read more less

Teak Lock-In Four-Rod Storage Rack Stainless steel and brass hardware 24"L x 1-3/16"H x 3-5/8"D

Read more less

Power-Rise Adjustable Stand-Up Post - Stainless SteelStainless Steel Pedestal, Adjusts From 22-1/2″ to 29-1/2″ Use As Seat Or Leaning Post. 3 Degree Tilt Cast Aluminum Swivel, Rotates 360°. Use With Any Non-Locking Spring-Lock™ Base (sold separately).Rated ABYC Class H-31 B (Fishing Only) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Lock & Latch for Smooth or Carpeted Surfaces Non-locking latch For smooth or carpeted surfaces Stainless Steel "D" Ring Handle Stem and Lock Nut Two O-Rings for Increased Water Resistance Position Indicators Show Open or Closed Position Easily Installs in a 2-3/8 Inch Diameter Hole For Mounting Surfaces 3/8 to 7/8 Inches Thick

Read more less

316 Stainless Steel Alloy Flush Mount Fuel Vent - 90° VentOn the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.Features:90-degree ventSpecifications: Hose Size (inch): 5/8" inner diameter Maximum Hull Thickness (inch): 7/8" Installation Hole Size (inch): 1-3/8" *Includes two silicone gaskets Quick Guide (pdf)

Read more less

Transom Door Latch Handle - Catch Plate IncludedIdeal for one handed operation of Transom Doors. 316 SS Hand Buffed and Electro-Polished. Includes Handle and Catch Plate.Specifications:  Weight 2.8 lbs (1.27kg) Length 9-5/8" (244mm) Height 2-3/4" (70mm)   Base Plate 4-1/2" (114mm) x 3-1/2" (89mm) Uses (4) 1/4" Flat Head Fasteners

Read more less

Solid Teak Handrails Two-Loop Handrail 23"L x 2-3/8"H x 1"D

Read more less

Burano Wheel 14" 3/4" Tapered Shaft Burl Polyurethane with Stainless Spoke Includes Center Cap/NutFeatures: 14" Burl Polyurethane Stainless steel spokes Chrome accents Hydrographic spoke inserts Chrome center cap 3/4" tapered hub

Read more less

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose White Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

Read more less

Combination Vented Gas Fill/Tank for 1-1/2" Hose - 35° Angled Neck Features: 35° Angled Neck Black Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required Flip Top Cap Specifications: For Hose Size: 1-1/2" For Vent Size: 5/8" Neck Length: 2-7/16 " Screw Size: #10

Read more less