Marine Hardware - Deck Fills

Stainless Steel Cast Hose Deck Fill Fits 1-1/2" Hose - Body OnlyThese Hose Deck Fills feature a slotted cap which requires a key to open and close for extra security. 1-1/2” hose deck fill cap diameter 1-7/8", thread pitch 11-1/2 NPSM straight. 2" hose deck fill cap diameter 2-1/8", thread pitch 11-1/2 NPSM straight. All fills and replacement caps (except waste) include attachment chain. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Flip Top Deck Fill - Gas - 1-1/2" Hose Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

30° EPA Pull-Up Deck Fill Angled 1-1/2" (Waste)Features: 1/4-turn pull-up cap with safety chain EPA approved for audible/visual open/close of cap Color-coded and imprinted with international standard symbols For use with carbon canister Pressure test cap available, PN 6062PC Chain Included Specifications: Type: Waste Dimensions: Flange: 3" Hose: 1-1/2" Fastener: #10(3) 316 Stainless Steel

Read more less

Pipe Deck Fill with Key - 2" Pipe (Gas)Deck fills are color-coded and imprinted with international standard symbols.Specifications: Type: Gas Pipe: 2" Flange: 4" Chain: Yes Fastener: #10 (3)

Read more less

Spare Waste Cap with O-RingFeatures:Black Polymer Cap

Read more less

Description: 316 S.S. 1/2" Push-Up Hose Deck Fill - Gas (Red). Angle - 90 degreesChain - Yes Fastener - #10 (3)Flange: 3"Hose Size: 1-1/2"

Read more less

0541 Vented Fill f/1-1/2" Hose - Straight Neck - Gas Straight Neck Chrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve Deck Plate Key and O-Ring Included Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" O.D. Flange: 3-3/8" Mounting Hole Dia.: 2-1/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

Stainless Steel Flip Top Deck Fill Lever Rebuild Kit Kit Contains: 1 Lever 1 Lever Spring 2 Pivot Pins 1 Cotter Pin 1 Cap Spring 1 Gasket/Washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Description: Hose - 2" Angle - 90 degreesChain - YesMaterial: 316 Stainless Steel Fastener: #10 Type: Diesel Flange: 3-1/2"

Read more less

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Designed and tested to prevent water from entering the fuel system Compatible with Ethanol blended fuels Stainless Steel finish EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm Quick Guide (pdf)

Read more less

0590 Angled Water Fill/VentFeatures: Chrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve (on diesel only) Deck Plate Key Not Required Specifications: For Hose Size: 1-1/2" For Vent Hose: 5/8" Mounting Hole Dia.: 2-1/8" O.D. Flange: 3-3/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

White Flip Top Cap Fills for 1-1/2" Hose - WhiteFeatures: White Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required EPA Compliant Flip Top Cap with Vacuum Pressure Relief Valve These fills meet the CARB and EPA requirements of U.S.C.G. Safety Standards (July 31, 2011) for 40 CFR Parts 9, 60, 80 et al. Control of Diurnal Emissions From Non-road Spark-Ignition Engines and Equipment. Specifications: For Hose Size: 1-1/2" For Vent Hose: 5/8" Neck Length: 2-7/16" Screw Size: #10 35° Angled Neck

Read more less