Marine Hardware

7-1/2" Gas Spring - 40lb - Black NitrateFeatures: Black Nitride Gas Spring Ext. Length - 7-1/2" Comp. Length - 5-1/2" Rod Dia. - 6mm Tube Dia. - 15mm P1 Force - 40 Specifications: Length: 7-1/2" Lift Capacity: 40 lbs Box Dimensions: 1"H x 3"W x 9"L WT: 0.2 lbs UPC: 725060314019

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Read more less

Concealed Soft Draw Latch with Keeper - Black RubberThe soft body construction of these latches quiets vibration and provides satisfactory performance despite misalignment. Internally-mounted lever provides over-center action for mechanical advantage in closing, plus protection against accidental opening Molded latch body conceals mechanism and mounting hardware Right-angle keeper design permits use in applications where panel is perpendicular to the frame Non-corrosive materials permit use in outdoor environments Provides steady state clamp force of 49 N (11 lbs.) at recommended mounting dimensions Industry Applications Appliance Electronic Enclosures Food Equipment HVAC Lawn/Garden Equipment Marine Medical

Read more less

SuproFlex Rub Rail Kit Gray with Gray Insert - 2"H x 29/32"W x 80'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes.Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Predrilled for fasteners Pairs with V12-0307GRD gray insert (included in the kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Ground Fault Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Read more less

Description: 316 S.S. 6" E-Z Push-Up Cleat. Overall length-6-1/2" Overall width - 1-1/2" Depth - 3-9/16" Cleat length - 6" Stud length - 1-7/8" Barb size - 3/4" Max Rope Diameter - 1-1/4" Specifications: Size: 6" Finish: Polished Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 7"L WT: 1.64 lbs UPC: 725060680916

Read more less

Quick Dock Cleat - 2-PackUsed for docking and tying up your paddleboard, kayak, small boat, or canoe with ease. Simply insert the quick dock cleat between dock boards and turn 90 degrees. Then tie up using your dock line.Features: High strength Stainless Steel material Rated for 1,000 pounds each Includes 2 dock cleats ¼” material Deburred clean edges Includes a carabiner Includes a strap to hold them together when they are not being used Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 6"W x 8"L WT: 0.55 lbs

Read more less

Pontoon Fender & Dock Line Hanger - 2-PackThe pontoon dock line holder is the easiest most user-friendly way to hang a fender from your railing. It clips onto the railing and has a 1-way cleat on it to lock in your dock line. The built-in cleat allows you to adjust the height of the dock line when hanging fenders for mooring your pontoon.Features: Sold as a 2-pack Aluminum shell Nylon dock line cleat inside Push button locking mechanism built-in Deburred edges for a smooth finish Hooks to square pontoon railings Dock rope cleat allows you to adjust lengths Great for hanging fenders

Read more less

Quarter-Turn Textured Deck Plate with Internal Collar - White - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SuproFlex Rub Rail Kit - White with Flex Chrome Insert - 2"H x 31/32"W x 80'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Pairs with V12-0307CP (included in kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Textured Quarter Turn Deck Plate - White - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Smooth Quarter Turn Deck Plate - Black - 6" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less