Marine Hardware

Hinged Bow Roller - Size 2Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 2: L - 430mm (16-15/16") B - 160mm (5-5/16") H - 100mm (4") h - 190mm (7-1/2") C - 66mm (2-11/16") Quick Guide (pdf)Brochure (pdf)

Read more less

Outboard Motor Bracket - Aluminum - Max 12HPAdjustable outboard motor bracket is designed for motors up to 12hp or 82lbs. This light weight aluminum bracket is designed for freshwater use on both powerboats and sail boats.Features: Same design as the 55-0021. This heavy duty, lightweight aluminum bracket is designed for motors up to 12hp or 82lbs max weight Spring loaded (14”of travel with 5 stops)  Do not use without Panther safety cable 55-0415—NOT included) Not to be used with 4 stroke engines

Read more less

Neat Cleat Stainless Steel - 6"A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8 in. stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.Features: Depth: 3-1/8 in. Height: 1-5/8 in. (lowered) Backed by a lifetime warranty against corrosion Size: 6 in. L x 1-1/2 in. W

Read more less

Deck Plate Lanyard - 12"This Deck Plate Lanyard is designed to retain deck plate lids. Fits all Sea-Dog® Deck Plates. Constructed of corrosion resistant 304 stainless steel. Attaches to lid with #6 RH fastener (included) and to the interior hull with a #10 RH fastener (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Flip Top Deck Fill Lever Rebuild Kit Kit Contains: 1 Lever 1 Lever Spring 2 Pivot Pins 1 Cotter Pin 1 Cap Spring 1 Gasket/Washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Description: Hose - 2" Angle - 90 degreesChain - YesMaterial: 316 Stainless Steel Fastener: #10 Type: Diesel Flange: 3-1/2"

Read more less

Stainless Steel Release Pin 1/4” x 1-1/2”Standard-duty detent release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. These quick-release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins, or to replace cotter pins where frequent removal is necessary.Features: Includes a split ring for attachment of an optional lanyard Constructed of corrosion-resistant 304 stainless steel Specifications: Pin Length (up to the split ring): 1-1/2” Pin Width: 1/4” Split Ring Diameter: 1” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quarter-Turn Smooth Deck Plate with Internal Collar - White - 4" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Smooth Quarter Turn Deck Plate - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Stud Mount Handrail - 6" The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to the mounting surface your boat. Functional and attractive, with no visible mounting hardware. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Designed and tested to prevent water from entering the fuel system Compatible with Ethanol blended fuels Stainless Steel finish EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm Quick Guide (pdf)

Read more less

Description: 10" Galvanized Dock Cleat. Fasteners - 7/16" Use Hexhead FastenersDimensions: L: 10" H: 1-15/16" Specifications: Finish: Galvanized Size: 10" Construction: Galvanized Box Dimensions: 1"H x 2"W x 10"L WT: 2.2 lbs UPC: 725060152215

Read more less