Marine Navigation & Instruments - Accessories

IDMK X12 XPLORE 12 In-Dash Mounting BracketIn-dash mounting kit for the Humminbird XPLORE Series fish finder is made with rugged, high-strength aluminum for a quick and easy install. This kit includes mounting hardware.Features: Allows for quick and easy in-dash installation Rugged, high-strength aluminum design Contains all necessary mounting hardware 1-Year Limited Warranty

Read more less

10" Protective Cover - PlasticKeep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this plastic protective cover.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 2"H x 10"W x 11"L WT: 0.4 lbs UPC: 753759219116

Read more less

GM H7R2 Gimbal Mount for HELIX 7 G4N ModelsThe GM H7 is a gimbal mount for HELIX 7 G4N products. This includes the gimbal mount, knobs, and mounting hardware. Features: Compatible with: HELIX 7 G4N models Includes gimbal mount, knobs, and mounting hardware 1-Year Limited Warranty Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 12"L WT: 0.8 lbs UPC: 082324056451

Read more less

Adapter Cable SeaTalk (1) to SeaTalkNG - 1MAn adapter spur cable to connect a SeaTalk device to a SeaTalkng network. The connection must be made via a 'bridging' device such as an ST70.SeaTalkNGRaymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkNG connectors can be used on NMEA 2000 networks that use Devicenet cabling through simple connector adapters and conversely equipment with Devicenet connectors can be used on NMEA 2000 networks that use SeaTalkng cabling through simple connector adapters.

Read more less

iKreate NMEA 2000 Simulator with USBFor anyone involved in designing, manufacturing, or installing marine electronics, the ability to simulate or replay NMEA2000 data is a real advantage and can accelerate software development, demonstrate NMEA2000 devices, or help diagnose network issues.With more and more modern boats having an NMEA2000 network at the heart of their navigation system, it is really important that you have the tools to investigate the devices and data on the network should things not work as planned.Consisting of an iKreate USB interface and an HTML5-based web app, the iKreate simulator can generate any number of NMEA2000 PGNs or replay saved log files of real-life network data from any NMEA2000 system, regardless of brand.This package includes iKreate to connect to the NMEA 2000 network and the simulator software to generate any number of NMEA2000 PGNs.Just like our NMEA2000 Display App, the iKreate Simulator takes a new approach and is the World’s first multi-platform, browser-based NMEA2000 Simulator App that will run on Windows, LINUX, Mac OS X, and Raspbian. There is no installation, and if you can save a file and find it again, then that is as complex as it gets with just a single HTML5 file to worry about (less than 0.5MB in size).You need to use the app with a browser that supports the Web Serial API, which currently includes Chrome, Chromium, MS Edge, and Opera. We also plan to support Firefox going forward (with its WebSerial Extension), but this was not possible for the first release of the app.Features: Create individual NMEA 2000 PGNs from a drop-down list populated with the data you enter, or play back a NMEA 2000 log file captured by a Digital Yacht NMEA 2000 product, etc, from an on-board system Multiple PGN groups can be created and even saved for future use The data variance function can synthesise changing values No complicated software to install – just a simple file for Chrome, Edge, Opera or Chromium Functions on PC, MAC, and Linux platforms – simple USB connection Set SRC address and instance Integrated 0.8m NMEA 2000 and 0.8m USB cable Available with USB-C connector (USB-A option) What's In The Box? iKreate USB Interface Software to download via link Owner's Manual (pdf)

Read more less

LANLink NMEA 0183 To Ethernet GatewayMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.Features: NMEA 0183 to ethernet gateway version 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection The web user interface for easy setup from the connected device via the browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm

Read more less

9-M360-2-DDI-Y - MEGA 360 & 2D/MDI 7-Pin Y-CableThis Y cable allows for the connection a MEGA 360 Imaging transducer and an external 7-pin HW / MDI+ transducer to the same compatible HELIX fish finder.  Combines MEGA 360 Imaging transducer and 7-pin Dual Spectrum/MEGA Imaging+ transducers into one 7-pin transducer plug for connection to the same, compatible HELIX fish finder. For use when connecting a MEGA 360 Imaging transducer to a HELIX fish finder, in conjunction with an external 7-pin HW / MDI+ transducer. This cable should not be use to connect a HELIX fish finder with both MEGA 360 Imaging and Built-In MEGA Imaging on Minn Kota trolling motors. Please refer to #720108-1 14 M360 2DDI Y for this specific rigging need. Is not compatible with Built-in MEGA Imaging transducers on select Minn Kota trolling motors 30" (76 cm) cable on Dual Sprectrum CHIRP side of cable 10' (3 m) cable on the MEGA 360 side 1-Year Limited Warranty Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 9"L WT: 0.8 lbs UPC: 082324054853

Read more less

AS ECX 30E Ethernet Cable Extender - 8-Pin - 30'The Ethernet Extension Cable is a 30' cable that allows you to extend the length of your ethernet cables.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

AS QD NMEA 2000 - Helix NMEA Adapter This NMEA 2000 adapter cable will allow you to connect a HELIX G4N fish finder to drop cable from an existing NMEA 2000 backbone (sold separately).  Compatible with: All HELIX 8/9/10/12/15 G4N Models 1-Year Limited Warranty

Read more less

Flush Mount Kit f/echoMAP™ Plus 9XsvLooking for a sleeker installation of your compatible marine device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 0"H x 8"W x 12"L WT: 0.05 lbs UPC: 753759188757

Read more less

Quarter Turn Locking CollarRoute cables without having to drill large holes in your vessel with this split connector. Newer Garmin cables do not have the locking collars factory-installed; this allows for easier installation when routing the cables through and behind cabinetry. The two-piece locking collar is attached to the connector.

Read more less

14 M ID SIDB Y - SOLIX®/APEX® Side Imaging & 2D Splitter Cable The 14 M ID SIDB Y cable allows for the installation of a separate 2D transducer paired with a Humminbird MEGA Imaging or non-MEGA Imaging transducer and connect both transducers to a single Humminbird control head. This y-cable provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar® 2D transducer to a Humminbird control head that also has a Side or Down Imaging transducer connected at the same time. This cable supports Transducer ID for automatic recognition and easy setup of Airmar® accessory transducers.Features: Compatible with: All SOLIX and APEX models Combines a MEGA Side Imaging transducer (or non-MEGA Imaging) and accessory 2D transducer and allows them to be connected to a single Humminbird control head. Automatically provides Side Imaging, Down Imaging and temperature from the standard all-in-one transducer and sources 2D sonar and digital depth from the 2D accessory transducer, without the need to switch data sources manually Includes Transducer ID for Airmar® accessory transducers, which automatically recognizes transducer type for easy installation and setup. Cable length: 30" (76 cm) 1-Year Limited Warranty

Read more less