Marine Navigation & Instruments - Accessories

DeviceNet (M) to ST-Ng (F) Adapter - 90°This handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other.

Read more less

ST-Ng Right Angle AdapterThis is a 90°, right angle spur connector. Used for the multifunction displays.

Read more less

RayStar 150 GPS Sensor w/Pole MountRS150 GPS SensorThe RS150 GPS is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system.Features: 72-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support A GNSS receiver with GLONASS compatibility Low power consumption: 30mA (1 LEN) SeaTalkng and NMEA2000 compatible (using a device net adapter cable) Designed for low profile surface mounting or optional pole mounting Specifications: Nominal supply voltage: 12V D.C. Powered by N2K bus Operating voltage range: 8 - 32V DC Power consumption: 30 mA max (NMEA LEN = 1) Operating temperature: -13ºF to 131ºF (-25ºC to +55ºC) Relative humidity: max 93% Waterproof: IPx6/7 Supported connection protocols: SeaTalkng: NMEA 2000 (certified) (via DeviceNet adaptor) Sensitivity: High sensitivity - acquisition down to -163dBm No. of channels: 72 Positioning System: GPS & GLONASS Satellite Differential Type: WAAS (United States); EGNOS (Europe); MSAS (Japan); GAGAN (India) Differential acquisition: Automatic Position accuracy (95%): <15M Position accuracy with SDGPS (95%): <5M Speed accuracy (95%): <0.3kt Time to first fix from cold start: <2 minutes (< 45 seconds typical) Time to first fix from hot start: < 8 seconds -72 hour hold up battery allows for hot start Geodetic Datum: WGS84 Pole Mount for RS150 GPS AntennaRaymarine's Pole Mount specifically for the RS150 GPS Antenna. The RS150 has 72 channels and offers faster 10Hz performance and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system. Specifications: Type: Antennas Box Dimensions: 8"H x 9"W x 12"L WT: 2.6 lbs UPC: 723193817513

Read more less

Quantum™ Data Cable - White - 5M5M Cable specifically for Raymarine's Quantum™ Radome with Wi-Fi and Ethernet. Specifications: Type: Cables Box Dimensions: 2"H x 9"W x 12"L WT: 0.6 lbs UPC: 723193783948

Read more less

20M RayNet to RayNet Cable for e & c Series

Read more less

TA101 Wind Anemometer Cup Set

Read more less

iKonvert with USB InterfaceThe iKonvert NMEA2000-0183 Gateway/Converter is an intelligent and flexible gateway for allowing software applications to read/write NMEA2000 data, either as RAW binary PGN data for ultimate analysis and control or converted to the older and more commonly supported NMEA0183 data.Every popular Marine Navigation application that runs on PC/MAC/LINUX computers, can read NMEA0183 data and for all of those programs, iKonvert provides a simple, reliable and cost effective way to access the navigation data on an NMEA2000 network. Simply set the DIP switches inside iKonvert to the required data mode that you want to use and iKonvert will extract the selected data from the NMEA2000 network and provide them to your marine application in a format and at a baud rate they support.For developers creating new applications or who know how to decode NMEA2000 PGNs, iKonvert can be easily set to its “RAW Mode” where data can be read/written to using a simple serial data format that we publish on our iKonvert Github site. No special libraries or proprietary code are required to integrate iKonvert, which has attracted the interest of a number of developers and it is already compatible with CanBoat and the popular Signal K Node Server.Digital Yacht’s iKonvert Gateway is housed in a compact and easy to mount housing, with an integral USB cable and standard NMEA2000 Micro drop cable (male).  Taking its power from the NMEA2000 network, and providing full galvanic isolation between the USB interface and NMEA2000 network, iKonvert operates at a baud rate of 230KB in “RAW mode” and 4.8KB, 38.4KB or 115KB in NMEA0183 conversion modes. All modes can be simply selected using the internal DIP switches with no special configuration software or firmware changes required.iKonvert’s USB interface features an FTDI chip that has the most reliable and compatible USB drivers for all of the popular operating systems (Windows/Mac/LINUX/Android), whilst an ISO Version of iKonvert will soon be released for direct connection between NMEA2000 and NMEA0183 systems.Features: Small but powerful bi-directional NMEA2000 Gateway/Converter Powered from the NMEA2000 network High Speed USB 2.0 USB Interface (FTDI) Compatible with Windows, OSX, LINUX and Android Can be configured to operate in “Raw Mode” (Binary PGN data) Converts all of the key navigational data Integral USB (Type A) and NMEA2000 Micro (Male) cables Simple configuration of data modes using DIP switches Full galvanic isolation

Read more less

Mounting Bracket for TZT12F & TZT3TZT12F Mounting Bracket OP19-20 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Mounting Brackets Box Dimensions: 6"H x 10"W x 15"L WT: 2.7 lbs UPC: 611679390547

Read more less

Electronic Control Unit (ECU)Garmin's Electronics Control Unit (ECU) is made specifically for the GHP™ 12 Autopilot System.Compatible Devices: GHP™ 12 Autopilot System GHP Reactor™ Mechanical/Retrofit/Solenoid Corepack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

GRID™ 20 - HorizontalSit Back and Take Control Provides intuitive, easy-to-use remote access and control of your entire Garmin marine system 360-degree, all-in-one joystick with a rotary knob and push-to-select button Enables easy chartplotter menu/setting navigation and fine control, even in the worst conditions 4 favorite keys can be designated to restore your system to a previously saved configuration Allows wired (NMEA 2000) or wireless installation options You don’t have to stand for hours at the helm. The easy-to-use GRID 20 remote input device provides intuitive remote access and control of your entire Garmin marine system. It features a 360-degree joystick with a rotary knob and push-to-select button for easy chartplotter menu/setting navigation and fine control, even in the worst conditions. You can designate 4 favorite keys to restore your system to a previously saved configuration. There are also a variety of hard keys for quick access to important functions, including left and right screen switches, autopilot standby/engage and more. For peace of mind, there’s also a dedicated SOS key. Wired or wireless installation and vertical or horizontal options allow for a plug-and-play solution that is tailored to your marine system. Its small footprint makes it convenient to integrate into a busy helm between displays — or even into the arm of the captain’s chair.In The Box: GRID 20 Mounting hardware Power cable Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

VHF Interconnect Cable - 1.2MEasily connect your VHF radio to your compatible AIS using our VHF interconnect cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Yamaha® Engine Bus to J1939 Adapter Cable - 3'Connect your J1939 equipped GPSMAP® 7400/7600/8400/8600 series chartplotter directly to your Yamaha engine bus multi-hub to bring Yamaha’s fully-integrated boat control system and custom touchscreen user interface to your Garmin installation.Pigtail Bus Wire Reference:Yamaha Part Number - Description 6Y8-82521-01-00 - 1 ft. Pigtail Bus Wire 6Y8-82521-11-00 - 2 ft. Pigtail Bus Wire 6Y8-82521-21-00 - 3 ft. Pigtail Bus Wire 6Y8-82521-31-00 - 6 ft. Pigtail Bus Wire 6Y8-82521-41-00 - 9 ft. Pigtail Bus Wire 6Y8-82521-51-00 - 12 ft. Pigtail Bus Wire WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less