Marine Navigation & Instruments - Accessories

Multi 5 Fused Lead Accessory Connection SystemWith more and more electronics being used in boating, this product allows up to five electronics or accessories to be connected to a single battery easily and correctly every time.With fused connectors to safeguard expensive electronics, connect any marine equipment including Depth Finders, GPS Units, Radios, Lights, Pumps, Aerators, and more to one of the 14 AWG leads (10 AMP draw) to allow multiple electronics to be quickly and easily connected and disconnected to a battery. Remove expensive batteries for charging, storage, replacement, or theft protection in seconds.Once the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.Features: Multi 5 fused connection system to power your outdoor equipment easily and quickly Plug & Play Connections  Lithium Compatible Suitable for use t-40° to 221° UL1977  120 Amp Rating. UL1426 Tinned Marine Grade Wire One-year Warranty Salt Water Approved Made In the USA

Read more less

Graph Power TillerDesigned for powering today's Locators Graphs, and networking, 10ft of 10 gauge marine grade wire nylon sheathed for protection and to limit RF interference, 3 fused connections to power your graphs, pucks, GPS, and NEMA boxes directly from your battery for the best performance and to meet Manufacturers recommendations. Features: 30 Amp fused at the battery and your choice of 3 or 5 Amp at the fused connections. Connect-Ease uses the best marine grade connections, heat-shrinkable crimped connections are waterproof, vibration, and interference Lithium Compatible

Read more less

Yamaha High Thrust Large Power Head 9.9, 15 (2005)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Mercury Mariner 9.9, 15 (1990-2004) & Yamaha 9.9, 15 (1990-2006)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

RayNet(F) to RayNet(F) Port Connectivity - 400mmThe RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This network cable is 15-inches (400mm) long.

Read more less

veKonvert NMEA 2000 GatewayveKonvert brings NMEA 2000 connectivity to Victron’s popular SmartShunt battery monitoring system. Now a navigation multi-function display becomes a sophisticated battery and energy management system.FeaturesveKonvert is a stand-alone NMEA 2000 interface designed in conjunction with Victron Energy to integrate VE.Direct compatible devices such as their SmartShunt, BMV Battery Monitors, and MPPT Solar Charge Controller range into NMEA 2000 systems.This functionality already existed but required the use of a sophisticated Cerbo module. veKonvert is a lower-cost, simpler solution for smaller installations that just need the electrical data displayed on a multi-function display.Boaters and boat builders like a clear and uncluttered dash or nav area, so integrating electrical data into the main navigation display is a popular and cost-saving option.The product is a collaboration between Victron Energy and Digital Yacht. The system utilizes Victron’s proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.Victron solar charge controllers (MPPTs) and battery monitors can now also interconnect to your NMEA 2000 MFD via the veKonvert interface.InstallationInstallation is simple – just "T" into the NMEA 2000 backbone and plug into the VE.Direct custom connector on the SmartShunt, and you've got battery and electrical data on your NMEA 2000 network!  Note that one veKonvert is required for each battery bank.Specifications: Universal NMEA 2000 gateway for Victron products with a VE.Direct interface Enables battery management or solar charge monitoring on compatible multi-function displays (Raymarine, Garmin, Navico, Furuno, etc) Provides battery voltage, charge/discharge current, state of charge, and time to depletion based on a sophisticated algorithm Easy installation, plug ‘n’ play connectivity, and self-powering from the NMEA 2000 bus Generates NMEA 2000 alerts from any BMV or SmartShunt Alarms Supports multiple SmartShunts for a larger multi-battery system VeKonvert Is Compatible with the Following Victron Products:BMV-700, BMV-702, BMV-700H, BMV-712 Smart, BMV-710H Smart, BMV-712 Smart, SmartShunt 500A/50mV, SmartShunt 1000A/50mV, SmartShunt 2000A/50mV, and All MPPT Charge ControllersThe veKonvert will automatically detect what Victron device it is connected to and adjust the NMEA 2000 data that it outputs accordingly. Below is a list of the PGNs that the veKonvert outputs for the different Victron Devices and different modes that they can operate in:  All MPPTs PGN 127506 DC Detailed Status (DC Type set to MPPT) PGN 127508 Battery Status (MPPT Output Voltage and Current) PGN 130900 Proprietary Solar Controller (All solar panel data) All SmartShunts and BMVs PGN 127506 DC Detailed Status (DC Type set to Battery, SOC and A/h consumed) PGN 127508 Battery Status (Output Voltage and Current) NOTE: veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged into the VE.Direct interfaces of any Victron "Consumers" such as Multiplus, Quattro, Cerbo, etc.

Read more less

Protective Cover for echoMAP™ 73dv & 7Xsv SeriesGarmin's protective cover fits your compatible echoMAP™, helping to keep it safe from the harsh marine environment when not in use.Compatible Devices: echoMAP™ 73dv echoMAP™ 73sv echoMAP™ 74sv WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 10"L WT: 0.4 lbs UPC: 753759126995

Read more less

MEGA 360 Adapter KitUsers who are wanting to install a MEGA 360 transducer to a trolling motor in addition to the FORESIGHT will need this spacer kit.Specifications: Weight: 1 lbs. Dimensions: 8 x 8 x 4 inches

Read more less

GM H5 Gimbal Mount for HELIX 5HELIX 5 Series gimbal mounting bracketWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 8"W x 9"L WT: 0.4 lbs UPC: 082324045936

Read more less

WND100 Mast Head Unit & 20M CableWind Transducers have a tough life, experiencing extreme weather, constant movement and the occassional seagull, so it is no surprise that they can often fail. With this in mind, the WND100 wind sensor features an ultra tough design with UV and salt resistant plastics, Igildur™ bearings for exceptional life and corrosion resistance. Data transmission is via a super-thin 20m digital cable providing fast update NMEA0183 data for maximum compatibility with legacy instrument systems and multi-function displays.Features: Ultra tough Mast Head Unit Igildur™ bearings for exceptional life and corrosion resistance UV, Salt water and high impact resistant plastics 12/24v DC operation with minimal power consumption Super thin 20m Mast Head cable Industry standard NMEA0183 Output for maximum compatibility Output at 5Hz (configurable)

Read more less

Power Pole Move Mega 360 Dual MountWith this bracket, users can attach a FORESIGHT Mount and a Humminbird Mega 360 unit to a Power Pole Move with a single bracket. Both ends of the bracket have a pivot joint for ultimate versatility in how the units sit in relation to the trolling motor.Specifications: Weight: 4 lbs. Dimensions: 14 x 10 x 6 inches

Read more less

Lowrance Ghost Mega 360 Dual BracketWith this bracket, users can attach a FORESIGHT Mount and a Humminbird Mega 360 unit to a Lowrance Ghost trolling motor with a single bracket. Both ends of the bracket have a pivot joint for ultimate versatility in how the units sit in relation to the trolling motor.Specifications: Weight: 4 lbs. Dimensions: 14 x 10 x 6 inches

Read more less