Marine Navigation & Instruments - Accessories

Tilt/Swivel Mount for STRIKER™ 5dv, 7dv & 7svSecure your compatible marine device with this mount that features tilt/swivel capabilities for optimum viewing.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 6"W x 10"L WT: 0.6 lbs UPC: 753759150471

Read more less

Handheld GPS Connector CableHand-held GPS Connector Cable connects a hand-held GPS unit to your Fishing System for easy viewability of track plotting information.All Matrix, 700 and 900 Series units are GPS capable. A user has three different GPS options with these products. They can either 1) plug in a GPS receiver into the accessory bus to get either GPS track plotting or chart plotting data depending on the unit's capabilities 2) plug in a GPS receiver along with the System link cable to allow two different units fishfinders to share one GPS receiver, or 3) plug in any of the four available GPS handheld cables that allow GPS track plotting data to be transferred from any handheld GPS that has NMEA output capability to the fish finder and displayed on the fishfinder screen.By using the handheld cables to connect the fishfinder to their handheld GPS unit the user can gain GPS trackplotting capability on the large display of their Matrix, 700 or 900 Series unit at a very low cost. The screens of handheld GPS units are small and often hard to view in extreme marine conditions. By using the handheld cables to transfer the GPS trackplotting data the user can view this information in an integrated form with their sonar information on large sunlight viewable display.*Bare wire NMEA connection cableWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Mark 15 Sextant#026This model has many great features including seven large sunshades, a 3 mm x 27 mm star scope, and easy-to-read micrometer drum vernier scale that reads to 2/10 of a minute. The Mark 15 has a 7" (18 cm) frame radius graduated from 120° to -5° and comes with a traditional half-silvered mirror.Comes with instruction booklet. Owner's Manual (pdf)

Read more less

Quantum™ Data Cable - White - 10M10M Cable specifically for Raymarine's Quantum™ Radome with Wi-Fi and Ethernet. Specifications: Type: Cables Box Dimensions: 2"H x 10"W x 11"L WT: 1 lbs UPC: 723193783955

Read more less

GM H7R2 Gimbal Mount for HELIX 7 G4N ModelsThe GM H7 is a gimbal mount for HELIX 7 G4N products. This includes the gimbal mount, knobs, and mounting hardware. Features: Compatible with: HELIX 7 G4N models Includes gimbal mount, knobs, and mounting hardware 1-Year Limited Warranty Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 12"L WT: 0.8 lbs UPC: 082324056451

Read more less

9-M360-2-DDI-Y - MEGA 360 & 2D/MDI 7-Pin Y-CableThis Y cable allows for the connection a MEGA 360 Imaging transducer and an external 7-pin HW / MDI+ transducer to the same compatible HELIX fish finder.  Combines MEGA 360 Imaging transducer and 7-pin Dual Spectrum/MEGA Imaging+ transducers into one 7-pin transducer plug for connection to the same, compatible HELIX fish finder. For use when connecting a MEGA 360 Imaging transducer to a HELIX fish finder, in conjunction with an external 7-pin HW / MDI+ transducer. This cable should not be use to connect a HELIX fish finder with both MEGA 360 Imaging and Built-In MEGA Imaging on Minn Kota trolling motors. Please refer to #720108-1 14 M360 2DDI Y for this specific rigging need. Is not compatible with Built-in MEGA Imaging transducers on select Minn Kota trolling motors 30" (76 cm) cable on Dual Sprectrum CHIRP side of cable 10' (3 m) cable on the MEGA 360 side 1-Year Limited Warranty Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 9"L WT: 0.8 lbs UPC: 082324054853

Read more less

GM S15 SOLIX Gimbal Mount BracketFeatures: Unit mounting bracket for the SOLIX 15 product series Mounting bracket Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 12"L WT: 1.3 lbs UPC: 082324050428

Read more less

Suncover for Dragonfly 4/5 & Wi-Fish - When Flush MountedCover is for flush mounted unit Specifications: Type: Covers Box Dimensions: 1"H x 10"W x 13"L WT: 0.5 lbs UPC: 723193812501

Read more less

Dragonfly 7 PRO Slip-Over Sun CoverProtective sun cover for Dragonfly 7 UnitsSlips over unit and fits like a glove Specifications: Type: Covers Box Dimensions: 2"H x 10"W x 13"L WT: 0.8 lbs UPC: 723193814215

Read more less

GND™ 10 Black Box BridgeThe Garmin GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus network and NMEA 2000 to provide trouble-free compatibility between Nexus and Garmin products including gWind and gWind Race wind transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity eliminates need for user setup and system configuration.GND 10 allows PC applications, such as NexusRace, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks. It also enables GND 10 software updates over NMEA 2000. Existing NexusRace PC application can be used to update software, configure and calibrate Nexus devices over USB using the FDX protocol.Features: Converts data between the Nexus network and NMEA 2000 Provides trouble-free compatibility between Nexus and Garmin products Simple plug-and-play installation between Nexus, NMEA 2000 and USB No user setup or system configuration required Allows PC applications such as NexusRace, Expedition, Adrena, or SeaTrack, to communicate sailing specific functions between Nexus and NMEA 2000 networks Enables GND 10 software updates over NMEA 2000 Existing NexusRace PC application can be used to update software, configure, and calibrate Nexus devices over USB using the FDX protocol Lighting levels of Nexus Marine instruments can be set from equipment connected to NMEA 2000 Allow setting and resetting of race start timers and distance logs from Garmin equipment connected to the NMEA 2000 network In The Box GND 10 USB Mini-B cable NMEA 2000® drop cable (2 m) NMEA 2000 T-connector Nexus network cable (5 m; straight connector) Mounting hardware Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Mark 25 Sextant#025The top of the line Davis plastic sextant, the Mark 25 features our Beam Converger™ mirror, sometimes referred to as a "full horizon mirror". A special coating is applied to high quality optical glass to allow the user to see through this mirror, yet still pick up images as faint as low-light stars.The Mark 25 is illuminated by a long-life LED and made of an upgraded plastic that is very stable.Comes with instruction booklet. Owner's Manual (pdf)

Read more less

Protective Cover for GPSMAP® 12x2 SeriesProtect your compatible marine device from the sun and scratches when not in use. This protective cover fits snugly over the display to avoid exposure.For Non Touch units.

Read more less