Marine Navigation & Instruments - Accessories

Adapter CableRaymarine adapter spur cable to connect an E-series display to a SeaTalkngnetwork, using the SeaTalk2 port on the back of the E-Series, 1.5M Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 6"L WT: 0.2 lbs UPC: 723193060612

Read more less

AR200 IP Camera Stabilization ModuleThe AR200 is an Augmented Reality Sensor consisting of a Global Navigation Satellite Systems (GNSS) Receiver and an Attitude and Heading Reference System (AHRS) sensor. The AR200 provides position, heading, pitch and roll data to compatible Axiom MFDs. When combined with a compatible IP camera the AR200 enables use of the ClearCruise™ Augmented Reality features available on your Axiom MFD.”Features: 9-axis AHRS (attitude and heading reference system) sensor 28-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support When combined with a compatible IP camera the AR200 enables the use of ClearCruise Augmented reality features available on Axiom multifunction displays NMEA 2000 compliant IPX6 / IPX7 waterproof rating In the Box: Mounting trim (top) Small sealing ring AR200 x3 large bulkhead bracket fixings (pan head pozi DIN7981-ST 3.9x22 C Z A4 Stainless steel) Mounting tray (bottom) x4 small surface mount fixings (pan head pozi DIN7981-ST 2.9x13 C Z A4 Stainless steel) Bulkhead (wall) bracket Large sealing ring Documentation 6m (19.7ft) SeaTalkNG white cable

Read more less

ECI-100 Universal Engine & Control InterfaceThe ECI-100 Universal Engine and Control Interface is an innovative and affordable solution for bridging engine instrumentation and drive-by-wire steering with Raymarine autopilot and navigation systems. A simple isolated CAN Bus solution, the ECI-100 offers reliable integration with Raymarine's latest generation of multifunction displays and also delivers a seamless autopilot steering interface to Raymarine's Evolution EV-2 Drive By Wire autopilot system.Benefits: A simple, single point of connection for engine data and drive-by-wire autopilot control Affordable and uncomplicated solution eliminates the need for multiple engine and autopilot gateways Brings Raymarine's Evolution 9-axis sensor and adaptive autopilot control to drive-by-wire propulsion without the need for a proprietary autopilot gateway View engine data displays and enjoy full autopilot control alongside Raymarine's industry-leading radar, sonar and navigation technologies using a single touch screen display. From our space saving aSeries, to our flagship big screen gS Series, engine information displays and autopilot control are available on any display running LightHouse v8 or later Access easy to customize displays to show engine performance data, fuel consumption, alarms, and much more View engine information displays on your smart phone or tablet with Raymarine mobile apps Simple to install ECI-100 makes engine and navigation integration a reality for virtually any size vessel ECI-100 Engine Data ParametersThe ECI-100 Universal Engine and Control Interface identifies the following parameters: Engine speed Engine oil temperature Engine temperature Engine oil pressure Engine coolant pressure Engine fuel rate Boost pressure Battery potential Transmission oil pressure Transmission oil temperature Total engine hours Fuel tank level Trip fuel used (calculated by ECI-100) Alternator potential Engine torque Engine percent load Transmission gear VIN (not shown on the display) Software number (not shown on the display) Simple Integration, Powerful PerformanceThe ultra-compact ECI-100 connects directly to the industry-standard NMEA2000 or SAE* J1939 Engine Data Bus used by major marine engine manufacturers including: Volvo Penta Yamaha Marine (Command Link Plus only) Caterpillar Yanmar Marine Raymarine is committed to delivering seamless integration with leading marine engines. Visit www.raymarine.com for the latest engine compatibility information.An industry standard DeviceNet port connects the ECI-100 to manufacturerspecific CAN bus cabling. The ECI-100 then connects to NMEA2000 networks using the SeaTalkng cabling system. Each of the ECI-100's isolated ports is powered independently ensuring reliable, worry-free performance from both navigation electronics and engine systems.* SAE - Society of Automotive Engineers standard Brochure (pdf)

Read more less

Pole Mount for RS150 GPS AntennaRaymarine's Pole Mount specifically for the RS150 GPS Antenna. The RS150 has 72 channels and offers faster 10Hz performance and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs UPC: 723193814826

Read more less

Masthead Cable & BaseRaymarine's 30M Masthead Cable and Base for Raymarine ST60 and i70.

Read more less

15M Digital cable with Raynet connector f/HD & Super HD Color Radar Scanners Specifications: Type: Cables Box Dimensions: 1"H x 21"W x 21"L WT: 8 lbs UPC: 723193770603

Read more less

TA125 Wind Transmitter Battery Pack and Seal Kit

Read more less

SeaTalk 3-Way Junction BlockJunction block with 3 SeaTalk sockets.

Read more less

EV-2 Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.Features & Benefits: Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change Flexible installation options - Mount above or below deck Simple SeaTalkng connectivity to the control head and ACU Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays EV-2 has been designed for the latest drive-by-wire steering systems and connects directly to Raymarine's SeaTalkng bus. EV-2 also has a dedicated CAN Bus port for direct connection to steer-by-wire steering systems - such as ZF Pod Drives, Yamaha Helm Master, Volvo IPS and SeaStar Solutions Optimus systems. A single CAN Bus connection to the EV-2 eliminates the need for an Autopilot Control Unit (ACU) further simplifying installation.

Read more less

HDMI Cable f/GPSMAP 8400/8600Connect your GPSMAP 8400 or 8600 series chartplotter to an high definition external video source, up to 1080p. The water resistant and secure connection allows you to watch a full HD video feed with audio right on your chartplotter’s screen. The GPSMAP 8400/8600 supports watching videos in full or split screen from popular devices connected with this 15-foot HDMI cable to the HDCP-compliant HDMI input port. This also allows mobile device connectivity for mirroring or streaming audio and video from HDMI-connected devices, including mobile phones and tablets connected via external adapters or dongles. Audio playback on stereos typically requires NMEA audio cable. You can also output full HD from your chartplotter screen and associated audio to an additional monitor or TV through HDMI¹.If using with a computer to gain touch control access, use with a USB cable (sold separately). Connect to DVI-D devices with standard DVI-to-HDMI adapters or cables (sold separately).¹This will not allow display of HDCP-protected content on remote displayWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Furuno Touch Encoder Unit for NavNet TZtouch2 & TZtouch3 - Silver - 3M M12 to USB Adapter CableControl all aspects of your NavNet TZtouch2 or NavNet TZtouch3 from one simple, stylish Touch Encoder!The TEU001 combines “The Best of Both Worlds” when it comes to NavNet control. The innovative TEU001B Touch Encoder Unit provides a compact, touch-based interface that emulates the already familiar Edge Swipe UI of NavNet TZtouch2 and NavNet TZtouch3. It also incorporates a beautifully designed RotoKey™ for easy access and tactile control of many common operations, including zoom in/out and quick menu scrolling. The color LCD touchscreen will enhance the look of any dash and provide incredible armchair control.With a RotoKey™ and LCD Touch Screen that supports both single and two-finger tap functions, you can control nearly every function of your NavNet TZtouch2 or TZtouch3 MFD directly from this simple and stylish Touch Encoder. Edge swipe up or down, left or right to access all of your menu options, take advantage of long and short press functions, and zoom and pan your charts - total control of your NavNet TZtouch2 or NavNet TZtouch3 MFD is at your fingertips!This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

Threaded Power Cable (2-Pin)Power your compatible ECHOMAP™ chartplotter with this 6-foot, 2-pin power cable. Specifications: Type: Cables Box Dimensions: 1"H x 4"W x 5"L WT: 0.15 lbs UPC: 753759310851

Read more less