Marine Navigation & Instruments - Accessories

IDMK-H89R Reinforced In-Dash Mounting Kit for HELIX® 8/9 G3N/G4N In-Dash Mounting Kit allows quick and easy, in-dash installation, with all necessary mounting hardware. Features:Compatible with: HELIX 9 MSI GPS G4N, HELIX 9 MSI GPS G3N, HELIX 9 MDI GPS G4N, HELIX 9 MDI GPS G3N, HELIX 9 CHIRP GPS G4N, HELIX 9 CHIRP GPS G3N, HELIX 8 MSI GPS G4N, HELIX 8 MSI GPS G3N, HELIX 8 MDI GPS G4N, HELIX 8 MDI GPS G3N, HELIX 8 CHIRP GPS G4N, HELIX 8 CHIRP GPS G3N Specifications: Type: Mounting Brackets Box Dimensions: 7"H x 8"W x 10"L WT: 1.5 lbs UPC: 082324053764 Quick Guide (pdf)

Read more less

Panoptix™ Ice Fishing Replacement Power CableUse this power cable to connect the Panoptix™ transducer and chartplotter to the battery of your compatible Panoptix ice fishing bundle and kit.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

9Ah 12V AGM Battery KitFeatures: Includes AGM battery & AC charger Fully Rechargeable Provides 12V of power 9 Amp hour current capacity Leak-Proof design

Read more less

ICE PTC UNB Portable Conversion Kit with XI 9 20 Transducer for Non-CHIRPThe ICE PTC XI 9 20 H57 is a portable ice fishing kit for Humminbird HELIX 5 and HELIX 7 models without CHIRP sonar technology. Convert your HELIX 5 or 7 models for ice fishing with the included accessories: portable shuttle with carrying handle, premium Humminbird bag, Dual Beam ice transducer with float, gimbal mounting brackets, HELIX power cable, and installation hardware. This kit will require a battery and charger to operate the HELIX fish finder (sold separately). Kit Includes: Portable shuttle with carrying handle premium bag Dual Beam ice transducer with float gimbal mounting bracket f/ Helix 5" and 7" Units HELIX power cable installation hardware WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

Pro Mount Base OnlyFor years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS or portable radios. The ProMount Quick Release Bracket makes it possible to easily remove your electronics weighing up to three pounds from a permanently mounted base with one hand. The 360-degree swivel adjustment lets you see the unit from any angle. The Pro Mount will fit nearly all Lowrance, Garmin, Eagle, Hummingbird, Pin-Point and Vexilar electronics. The permanent base is available separately too, which makes it easy to place several bases around the boat or even in another boat. Several systems have been mounted in trucks to hold GPS units with great success. The ProMount sells for much less than current brackets, but with more features and versatility. The sleek, low profile of the ProMount is only 1 1/8 inches high. The permanent base has no sharp edges to step-on or wear a hole in your boat cover. An optional installation hole cover spacer comes with every base to give you a well finished look to the mount when installed. Your electronics can also be mounted overhead and hang down on the secure locking rail system of the ProMount to increase the potential places you can mount electronics. The ProMount Quick Release Bracket comes with all stainless steel mounting hardware and the bracket is corrosion resistant. The ProMount is self-draining and easy to clean, so it even looks good when the electronics are not in your boat.Features: 360-degree swivel adjustment Sleek, low profile of the ProMount is only 1-1/8 inches high Fits nearly all Lowrance, Garmin, Eagle, Hummingbird, and Vexilar electronics Made of tough ABS plastic Stainless steel mounting screws One year warranty Made in the USA Specifications: Outside Dimensions: 3.45" x 4.75" Mounting Hole Spacing: 2.3" x 3.7" Mounting Hole Size: 1/4" Supports weights up to 3 pounds One year warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 1"H x 8"W x 8"L WT: 0.35 lbs UPC: 052762020024

Read more less

Pivot Bracket with Backing PlateEdson's Pivot Bracket attaches to Edson's Fold-Down Adapter for Radar Masts (990-23 2-3/8" Mast & 990-35 3-1/2" Mast) (sold separately) that is secured to the bottom of your radar mast allowing it to fold down. Fold-Down Towers are perfect for trailer boats, low bridge clearance and end of the season storage. Use 989-1 Right Angle Base (sold separately) if mounting to a vertical surface and folding tower fore and aft. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 10"L WT: 1.8 lbs UPC: 796744002317

Read more less

Flush Mount Kit f/echoMAP™ Plus 9XsvLooking for a sleeker installation of your compatible marine device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 8"W x 12"L WT: 0.05 lbs UPC: 753759188757

Read more less

5M Data CableThis 6-pin SI-TEX cable is a heading sensor data cable.Specifications:Length: 5 meters

Read more less

Tilt Mount f/STRIKER™ Plus 9svSecure your compatible marine device with this mount, featuring tilt capabilities for optimum viewing.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 10"L WT: 0.5 lbs UPC: 753759186937

Read more less

IDMK H7R In-Dash Mounting Kit f/Helix 7The IDMK H7R is a rigid and reinforced in-dash mounting kit for HELIX 7 models fish finders, complete with bracket and hardware. This provides a secure and finished look for in-dash mounting of your Humminbird fish finder.  Compatible with: All HELIX 7 models, except HELIX 7 G4N Note:  For HELIX 7 GPS models, this optional in-dash mounting kit is not optimized for metal in-dash scenarios 1-Year Limited Warranty WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 12"L WT: 0.8 lbs UPC: 082324052200 Quick Guide (pdf)

Read more less

E90W to Axiom Pro 9 Adapter Plate to Existing Fixing Holes Axiom Pro 9 adapter plate for legacy E90W MFDs Fixing holes: Existing Model: Axiom Pro 9 (All variants) Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 1 lbs

Read more less

RCR-SD/USB-Card ReaderRear - Charging, external storage device for Axiom & Axiom Pro Units

Read more less