Marine Navigation & Instruments - Accessories

SCU-38 Passive GPS AntennaThe Standard Horizon SCU-38 external receiver allows your compatible Standard Horizon radios internal GPS receiver to operate even when mounted in an area where the internal GPS cannot receive a signal. Simply connect the SCU-38 and mount the antenna where it has a clear view of the sky. Cable measures 5M long.The SCU-38 is compatible with the following Standard Horizon radios: GX1400G, GX1800G, GX1850G, and GX2400 *Please note that the SCU-38 is a passive antenna and will only work with units already equipped with a built-in GPS receiver.

Read more less

Power Cable - 8-PinPower and connect your compatible GPSMAP® device with this 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.Compatible Devices: echoMAP™ Series GPSMAP® Series WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 5"L WT: 0.4 lbs UPC: 753759998394

Read more less

RMK-10 System Remote Control - Portrait & Landscape KeypadRaymarine's RMK-10 Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location. The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control.RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displaysThe RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere.RMK-10 Mounting OptionsThe RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you.For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system.RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom.Networking & ControlUtilizing Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays.When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.

Read more less

RayStar 150 GPS Sensor w/Pole MountRS150 GPS SensorThe RS150 GPS is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system.Features: 72-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support A GNSS receiver with GLONASS compatibility Low power consumption: 30mA (1 LEN) SeaTalkng and NMEA2000 compatible (using a device net adapter cable) Designed for low profile surface mounting or optional pole mounting Specifications: Nominal supply voltage: 12V D.C. Powered by N2K bus Operating voltage range: 8 - 32V DC Power consumption: 30 mA max (NMEA LEN = 1) Operating temperature: -13ºF to 131ºF (-25ºC to +55ºC) Relative humidity: max 93% Waterproof: IPx6/7 Supported connection protocols: SeaTalkng: NMEA 2000 (certified) (via DeviceNet adaptor) Sensitivity: High sensitivity - acquisition down to -163dBm No. of channels: 72 Positioning System: GPS & GLONASS Satellite Differential Type: WAAS (United States); EGNOS (Europe); MSAS (Japan); GAGAN (India) Differential acquisition: Automatic Position accuracy (95%): <15M Position accuracy with SDGPS (95%): <5M Speed accuracy (95%): <0.3kt Time to first fix from cold start: <2 minutes (< 45 seconds typical) Time to first fix from hot start: < 8 seconds -72 hour hold up battery allows for hot start Geodetic Datum: WGS84 Pole Mount for RS150 GPS AntennaRaymarine's Pole Mount specifically for the RS150 GPS Antenna. The RS150 has 72 channels and offers faster 10Hz performance and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system. Specifications: Type: Antennas Box Dimensions: 8"H x 9"W x 12"L WT: 2.6 lbs UPC: 723193853726

Read more less

GM H7 Gimbal Mount for Select HELIX 7 SeriesThe GM H7 is a plastic gimbal mount for all HELIX 7 models products except HELIX 7 G4N models . This includes the gimbal mount, knobs and mounting hardware.Compatible Devices:All HELIX 7 models, except HELIX 7 G4N modelsWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 9"L WT: 0.7 lbs UPC: 082324047190

Read more less

IDMK X9 XPLORE 9 In-Dash Mounting BracketIn-dash mounting kit for the Humminbird XPLORE Series fish finder is made with rugged, high-strength aluminum for a quick and easy install. This kit includes mounting hardware.Features: Allows for quick and easy in-dash installation Rugged, high-strength aluminum design Contains all necessary mounting hardware 1-Year Limited Warranty

Read more less

Quick Release Mount for echo™ 200, 500c & 550cCompatible with echo 200, 500c and 550c, this replacement mount features tilt/swivel capabilities for optimum viewing. With the mount's quick cable disconnect feature, you can plug the necessary cords directly into the mount, allowing you to seat/unseat your device with ease.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 6"W x 7"L WT: 0.65 lbs UPC: 753759974527

Read more less

Masthead Cable & BaseRaymarine's 30M Masthead Cable and Base for Raymarine ST60 and i70.

Read more less

Pipe to Fold-Down Adapter 3-1/2" MastEdson's Fold-Down Adapter 3-1/2" Radar Masts attaches to the bottom of your radar mast allowing it to fold down. Fold-Down Towers are perfect for trailer boats, low bridge clearance and end of the season storage. By using a992-35 Pivot Bracket (sold separately) and Fold-Down Adapter with your Standard Radar Mast, you can also mount your radar on a raked transom or coaming side.  Use 989-1 Right Angle Base (sold separately) if mounting to a vertical surface and folding tower fore and aft.

Read more less

ICE PTC UNB Portable Conversion Kit with XI 9 20 Transducer for Non-CHIRPThe ICE PTC XI 9 20 H57 is a portable ice fishing kit for Humminbird HELIX 5 and HELIX 7 models without CHIRP sonar technology. Convert your HELIX 5 or 7 models for ice fishing with the included accessories: portable shuttle with carrying handle, premium Humminbird bag, Dual Beam ice transducer with float, gimbal mounting brackets, HELIX power cable, and installation hardware. This kit will require a battery and charger to operate the HELIX fish finder (sold separately). Kit Includes: Portable shuttle with carrying handle premium bag Dual Beam ice transducer with float gimbal mounting bracket f/ Helix 5" and 7" Units HELIX power cable installation hardware WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

GM X10 XPLORE 10 Gimbal Mounting BracketThis metal gimbal mount is for all XPLORE 9 models. This includes the gimbal mount, gimbal mounting knobs, and hardware.Features:1-Year Limited Warranty

Read more less

GM X9 XPLORE 9 Gimbal Mounting BracketThis metal gimbal mount is for all XPLORE 9 models. This includes the gimbal mount, gimbal mounting knobs, and hardware.Features:1-Year Limited Warranty

Read more less