Marine Navigation & Instruments - Accessories

veLink Victron BLE to NMEA 2000The veLink complies with the NMEA 2000 standard and works with all NMEA 2000 certified equipment. It is also compatible with the Raymarine SeaTalkNG standard via an NMEA 2000 to SeaTalkNG connector adapter (Raymarine part number: A06045). Owner's Manual (pdf)

Read more less

Yamaha 6, T8 (All Years) & 9.9 (2008-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP, and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Marine Network Adapter Cable - RJ45 (Female) to BlueNet (Female)Adapt the Garmin BlueNet™ Network connector on your Garmin device to the legacy Garmin Marine Network connector. These cables do not replace the need to use a Garmin BlueNet™ 30 gateway. Check compatibility before purchase. Specifications: Type: Cables Box Dimensions: 2"H x 6"W x 8"L WT: 0.25 lbs UPC: 753759336981

Read more less

AR200 IP Camera Stabilization ModuleThe AR200 is an Augmented Reality Sensor consisting of a Global Navigation Satellite Systems (GNSS) Receiver and an Attitude and Heading Reference System (AHRS) sensor. The AR200 provides position, heading, pitch and roll data to compatible Axiom MFDs. When combined with a compatible IP camera the AR200 enables use of the ClearCruise™ Augmented Reality features available on your Axiom MFD.”Features: 9-axis AHRS (attitude and heading reference system) sensor 28-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support When combined with a compatible IP camera the AR200 enables the use of ClearCruise Augmented reality features available on Axiom multifunction displays NMEA 2000 compliant IPX6 / IPX7 waterproof rating In the Box: Mounting trim (top) Small sealing ring AR200 x3 large bulkhead bracket fixings (pan head pozi DIN7981-ST 3.9x22 C Z A4 Stainless steel) Mounting tray (bottom) x4 small surface mount fixings (pan head pozi DIN7981-ST 2.9x13 C Z A4 Stainless steel) Bulkhead (wall) bracket Large sealing ring Documentation 6m (19.7ft) SeaTalkNG white cable

Read more less

Adaptor Plate for Axiom 9 to C80/E80 Size Cutout *Will Require New HolesThe Axiom 9 adapter plate is used when replacing an existing legacy C80 or E80 Classic Multifunction Display with an Axion 9 or Axion 9 RV requires new fixing holes. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 16"L WT: 1.05 lbs UPC: 723193824955

Read more less

Axiom 7 Surface Mount Suncover - 7"Suncover for Axiom 7 when surface mounted out of the box Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 8"L WT: 0.1 lbs UPC: 723193818367

Read more less

Signal™ 6.5" External White Shallow Mount SpeakerMarinized speaker with a 15W RMS output provides loud and clear audio from compatible Garmin Signal marine VHF radios. The shallow mount design allows for versatile installation on board your vessel.

Read more less

Course Computer Unit - Reactor™ 40Garmin's CCU is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to the NMEA 2000® network to communicate with your GHC™ 20 and an optional NMEA 2000-compatible devices.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SeaTalk1 to USB InterfaceDigital Yacht's SeaTalk to NMEA (ISO) Converter is a small, but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA 0183 network or device. Taking its power from the SeaTalk network, the ST-NMEA Converter features a full, multi-transistor SeaTalk 1 interface, an opto-isolated NMEA 0183 input and differential NMEA 0183 output that allows key navigational data to be reliably shared between the SeaTalk and NMEA0183 networks.For developers and advanced users that want to access the raw SeaTalk data, the ST-NMEA converter can also be configured to work in a special “raw data" mode ($STALK) which is gaining support in some Open Source projects.The ST-NMEA (ISO) Converter is ideal for connection to one of Digital Yacht's wireless NMEA servers, allowing SeaTalk owners to go wireless and aUSB Version of the ST-NMEA Converteris also available for direct connection to a PC, Mac or even a Raspberry Pie embedded Linux system.Features: Converts SeaTalk1 to NMEA data Powerful bi-directional converter –also converts NMEA to SeaTalk for use with 3rdparty transducers and sensors Powered from the SeaTalk network –easy red, black and yellow wire colour coding Features reliable multi-stage transistor SeaTalk interface Opto-isolated NMEA0183 input and differential NMEA0183 output Converts all of the key navigational data USB version (for PC & MAC) also available USB variant can also be configured to operate in “Raw Data” mode ($STALK) USB Version - Typical Connections: Connects direct to SeaTalk1 cabling using familiar red, black and yellow wiring Simple plug in USB connection for PC. MAC and Linux Also supports raw data mode for developers Ideal for use with nav programs

Read more less

MA800 GPS Antenna for AIS TranspondersThe MA800 passive GPS Antenna for AIS transponder (P/No. X500.391) is compatible with all current Digital Yacht AIS Transponders (AIT2000/2500/3000/5000/CLA1000/CLA2000). It is therefore an ideal replacement antenna for many makes of GPS receivers and chart plotters.  You can also use it with the discontinued AIT250 and AIT1000. However, the physical size and shape are different from the original antenna.The base can be removed for puck mounting or with the base fitted, it can be attached to any 1” mounting accessory (available separately) for pole, deck, bracket, and rail mounting.It ships with a 33' cable terminated with a slim FME connector and FME-TNC adaptor.Specifications: Bolt holes: 5/16" diameter, 3" x 1-1/2" on center Special cable slot thus eliminating removal of most factory-installed connectors Standard 1 in-14 thread (male) Stainless steel Heavy-duty construction Specifications: Antenna Band: AIS Color: White Type: Antennas Box Dimensions: 2"H x 8"W x 9"L WT: 1.2 lbs UPC: 081159830373

Read more less

Mercury 5 & 6 (All Years) & Nissan/Tohatsu 5 & 6 (1995 - Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Minn Kota Ultrex/Ultrex Quest Mega 360 Dual BracketWith this bracket, users can attach a FORESIGHT Mount and a Humminbird Mega 360 unit to a Minn Kota Ultrex/Ultrex Quest trolling motor with a single bracket. Both ends of the bracket have a pivot joint for ultimate versatility in how the units sit in relation to the trolling motor.Specifications: Weight: 4 lbs. Dimensions: 14 x 10 x 6 inches

Read more less