Marine Navigation & Instruments - Gauges

Euro Black 4" Tachometer w/Systemcheck 7000 RPM (Gas) f/ Johnson / Evinrude Outboard)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Electronic tachometers work by counting pulses generated by the ingition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.4" - Hole size: 3.375" (85mm)For Engine Types:Johnson and Envinrude OutboardSystemCheck Warnings: No Oil Engine Overheat Check Engine Low Oil Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N TC9951*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/System Check Series: Euro Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266328501 Quick Guide (pdf)

Read more less

Chesapeake Black 4" Tachometer - 7000 RPM (Gas) (All Outboards)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N TC9035*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer Voltage - Input Range (Volts): 12/24 V Series: Chesapeake Black Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266337183 Quick Guide (pdf)

Read more less

52mm (2-1/16") Viewline Voltmeter 18-32V - Black Dial & BezelThe Viewline voltmeter displays the status of the generator and battery and their loads on a voltage scale. Values exceeding the normal charging voltages can therefore be monitored exactly. Features: Installation Dimension: 52mm - 2-1/16" Color: Black Lens: Plastic Double Anti-Fog Bezel Model: Black Round Measurement Range: 18 - 32V DC Category: Voltmeters Series: Veratron Viewline Application: VDO Engine Monitoring Signal Analogue: 0 - 32V DC IP Class Front: IP67 (IEC 60529) Operating Voltage: 18 - 32 Volt DC Functionality: 24 Volt Battery Condition Input: Analog Bezel Interchangeable: Yes - Clip-On Warning Light: Red LED Via Plus And Min Communication: Analog This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 2-1/16" Gauge Type: Voltmeter/Ammeter Series: ViewLine Voltage - Input Range (Volts): 18-32v Box Dimensions: 3"H x 4"W x 8"L WT: 1.5 lbs UPC: 7640178722811 Brochure (pdf)

Read more less

EngineBox - Single EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to the analog input ports provided and designed for RPM data, resistive sensors and capacitive sensors. The EngineBox has to be set up using an intuitive PC configuration tool making it easy for programming the inputs (delivered free of charge). Thanks to the ISO 8846:1990 compliance, the EngineBox is also designed to be installed in engine compartments.The Veratron Diagnostic Tool USB to NMEA 2000 (A2C3931270001) and Veratron Configuration Software tool are needed to configure this Engine Box.Features: Analog to NMEA 2000® gateway  J1939 to NMEA 2000® gateway  2 Models for single engine and dual engine configurations  Compact design  Status LED  Operating temperature range -40°C/+85°C Technical Specifications:  1x J1939 (2x J1939 Dual Engine)  1x M12 5 pins NMEA 2000®  1x Input 0–4 kHz for RPM (2 inputs with Dual Engine Model)  4x Inputs 0–400 Ohm (up to 8 inputs with Dual Engine Model)  2x Inputs 4–20 mA  1x Input 0–5 V (2 inputs with Dual Engine Model) In the Box: Engine Cable Cable Harness Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 8-16v Gauge Type: Multifunction Gauge Size: N/A Box Set: No Box Dimensions: 4"H x 6"W x 6"L WT: 1.35 lbs UPC: 7640178724426 Brochure (pdf)

Read more less

EngineBox - Double EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to the analog input ports provided and designed for RPM data, resistive sensors and capacitive sensors. The EngineBox has to be set up using an intuitive PC configuration tool making it easy for programming the inputs (delivered free of charge). Thanks to the ISO 8846:1990 compliance, the EngineBox is also designed to be installed in engine compartments.The Veratron Diagnostic Tool USB to NMEA 2000 (A2C3931270001) and Veratron Configuration Software tool are needed to configure this Engine Box. Features: Analog to NMEA 2000® gateway  J1939 to NMEA 2000® gateway  2 Models for single engine and dual engine configurations  Compact design  Status LED  Operating temperature range -40°C/+85°C Technical Specifications:  1x J1939 (2x J1939 Dual Engine)  1x M12 5 pins NMEA 2000®  1x Input 0–4 kHz for RPM (2 inputs with Dual Engine Model)  4x Inputs 0–400 Ohm (up to 8 inputs with Dual Engine Model)  2x Inputs 4–20 mA  1x Input 0–5 V (2 inputs with Dual Engine Model) In the Box: Engine Cable Cable Harness Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Size: N/A Box Set: No Voltage - Input Range (Volts): 8-16v Gauge Type: Multifunction Box Dimensions: 4"H x 6"W x 6"L WT: 1.45 lbs UPC: 7640178724433 Brochure (pdf)

Read more less

Platinum 4" Multi-Function - Fuel Level & Voltmeter Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.  All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.  Multi-Function Gauge Displays: Fuel (E-1/2-F) Voltmeter (10 - 18 VDC) 4" - Hole size: 3.375" (85mm)Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GF0275*Sold as an Individual*Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: Platinum Gauge Type: Multifunction Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 5"W x 6"L WT: 0.9 lbs UPC: 759266220133 Owner's Manual (pdf)Brochure (pdf)

Read more less

Chesapeake Black SS Boxed Set - Inboard MotorsPerimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.  Packaged and ready for the display counter. This 6 Gauge Boxed Sets offer a complete set of gauges ready to install.Inboard Motors Boxed Set Includes: Speedometer (60 MPH) (Mechanical) Tachometer (6000 RPM) Fuel Level (E-1/2-F) Voltmeter (10-16 VDC) Water Temp (100-250 F) Oil PSI (80 PSI) Specifications: Anti-scratch glass lens 12 VDC negative ground Dual Scale - Imperial and Metric Factory P/N KTF003*Sold as a Box Set**Gauge Covers not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Box Set Box Set: Yes Series: Chesapeake Black Voltage - Input Range (Volts): 12/24 V Box Dimensions: 6"H x 10"W x 21"L WT: 4.8 lbs UPC: 759266000032

Read more less

Kronos Boxed Set of 6 Gauges f/ Inboard MotorsPackaged and ready for the display counter.  This 6 gauge boxed set offers a complete set of gauges ready to install. Inboard Motors Boxed Set Includes: Speedometer (0 to 60 MPH) (Pitot) Tachometer (0 to 6000 RPM) Fuel Level (E to F) Voltmeter (10 to 16 AMPS) Water Temp (100 to 250° F) Oil PSI (0 to 80 PSI) Factory P/N KTF024*Sold as a Box Set**Gauge Covers not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Box Set Series: Kronos Voltage - Input Range (Volts): 12/24 V Box Set: Yes Box Dimensions: 6"H x 10"W x 21"L WT: 4.9 lbs UPC: 759266000247

Read more less

Chesapeake White SS 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas - Johnson/Evinrude Outboard)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.SystemCheck Warnings: No Oil Engine Overheat Check Engine Low Oil 4" - Hole size: 3.375" (85mm)For Engine Types:Johnson/Evinrude OutboardSpecifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N TC9881*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/System Check Box Set: No Series: Chesapeake White Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266338500 Quick Guide (pdf)

Read more less

Chesapeake White SS 2" Depth Sounder with Thru-Hull TransducerPerimeter-lighted black dial with stylish Blue and White graphics, polished stainless steel bezel, and domed glass lens.The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms. Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.  Depth Sounder includes a Faria SN2060 thru-hull mount transducer w/26' cable.2" - Hole Size: 2.0625" (53mm)Specifications: Imperial and Metric Values Domed Glass Anti-fog, Scratch Resistant Lens Programmable Keel Offest  Stainless Steel Bezel 199 Foot (61m) Depth Capability Audible and Visual alarm for Shallow/Deep Water Conditions Factory P/N DS0110*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Type: Depth Sounder Voltage - Input Range (Volts): 12/24 V Series: Chesapeake White Gauge Size: 2" Box Dimensions: 8"H x 8"W x 9"L WT: 2.1 lbs UPC: 759266138940 Owner's Manual (pdf)

Read more less

Coral 4" Tachometer (7000 RPM) (All Outboard) Perimeter-lighted Black dial with stylish White and Blue graphics, Black aluminum bezel with burnished leading edge, contoured White pointer, and flat glass lens.Electronic tachometers work by counting pulses generated by the ignition system, alternator, tachometer signal generator or magnetic pickup sender.  The tachometer is hooked up to +12 VDC, Ground and one of the signal sources.4"- Hole Size: 3.375" (85mm)Specifications: Scratch Resistant Lens Black Aluminum Bezel Contoured White Pointer Factory P/N TC9036*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer Gauge Size: 4" Box Set: No Voltage - Input Range (Volts): 12/24 V Series: Coral Box Dimensions: 6"H x 6"W x 7"L WT: 0.7 lbs UPC: 759266330054

Read more less

Chesapeake Black w/Stainless Steel Bezel Boxed Set of 6 - Speed, Tach, Fuel Level, Voltmeter, Water Temperature & Oil PSI - Inboard MotorsPerimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.  Packaged and ready for the display counter. This 6 Gauge Boxed Sets offer a complete set of gauges ready to install.Boxed Set Includes: Speedometer (0 to 60 MPH) (GPS) Tachometer (0 to 6000 RPM) Fuel Level (E to F) Voltmeter 10 to 16 AMPS) Water Temperature (100 to 250° F) Oil Pressure (0 to 80 PSI) Specifications: Anti-scratch glass lens 12 VDC negative ground Dual Scale - Imperial and Metric Factory P/N KTF064*Sold as a Box Set**Gauge Covers not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Box Set Box Set: Yes Voltage - Input Range (Volts): 12/24 V Series: Chesapeake Black Box Dimensions: 7"H x 10"W x 21"L WT: 4.05 lbs UPC: 759266000643

Read more less