Marine Navigation & Instruments - Transducer Accessories

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.65 lbs

Read more less

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 4"H x 5"W x 6"L WT: 0.8 lbs

Read more less

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264 IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16". Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 10"L WT: 0.6 lbs

Read more less

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 9"L WT: 0.5 lbs

Read more less

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.55 lbs

Read more less

Transom Mounting Bracket for P66 Transducer - 2004 & upThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 801769004656

Read more less

Complete kit for mounting depth transducer inside GRP hull.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Misc Box Dimensions: 3"H x 4"W x 8"L WT: 0.65 lbs UPC: 610696095176

Read more less

Transom Mount BracketEasily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds.

Read more less

Bare Wire Transducer to 12-Pin Sounder Wire Block AdapterConnect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.Compatible Devices: GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsv GSD™ 25 Premium Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 7"L WT: 0.8 lbs UPC: 753759142810

Read more less

AD-MTM-HW-MDI MEGA DI+ Trolling Motor Adapter Bracket MEGA DI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Down Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling motor for a low profile fit. Features: Compatible Transducers: XM 9 HW MDI T, XTM 9 HW MDI T, XM 14 HW MDI T, XTM 14 HW MDI T Compatible Fish Finders: HELIX 9 CHIRP MEGA DI+ GPS G3N, HELIX 10 CHIRP MEGA DI+ GPS G3N, HELIX 12 CHIRP MEGA DI+ GPS G3N, SOLIX 10 G2 – All Models, SOLIX 12 G2 – All Models, SOLIX 15 G2 – All Models Specifications: Type: Adapters Box Dimensions: 3"H x 8"W x 9"L WT: 0.8 lbs UPC: 082324053795

Read more less

Trolling Motor Barrel Mount f/Livescope Plus LVS34 Mount a compatible LiveScope™ transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those on popular Minn Kota® and MotorGuide® trolling motors.

Read more less

8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 7"L WT: 0.8 lbs UPC: 753759976286 Owner's Manual (pdf)

Read more less