Marine Navigation & Instruments - Transducer Accessories

Transducer Mounting PlateFeatures: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with only 2 screws All hardware included

Read more less

MHX XNPT Portable Hardware KitMounting hardware and suction cup for portable XNT transducers. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 8"L WT: 0.55 lbs UPC: 082324507694

Read more less

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 8"W x 8"L WT: 0.5 lbs UPC: 753759142827

Read more less

Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP™ CHIRPConnect a Garmin GT30 transom mount scanning transducer and a Garmin GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible echoMAP™ CHIRP chartplotter/sonar combo.This adapter cable allows the echoMAP CHIRP to continue to display water depth from the in-hull transducer in instances when the transom mount transducer loses depth reading due to cavitation.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 10"L WT: 0.2 lbs UPC: 753759153014

Read more less

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 4"H x 5"W x 6"L WT: 0.8 lbs

Read more less

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264 IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16". Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 10"L WT: 0.6 lbs

Read more less

Transom Mount Bracket f/Livescope Plus LVS34Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount.

Read more less

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164 SS164 B175C SS264 Specifications: Type: Tools Box Dimensions: 5"H x 6"W x 7"L WT: 1.1 lbs

Read more less

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.55 lbs

Read more less

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60 B60 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 5"L WT: 0.5 lbs

Read more less

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.65 lbs

Read more less

Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features: Quickly measures boat hull deadrise angle. Ball Bearing construction for accuracy. Attach to straight edge or framing square Handy angle and grade chart on back of unit Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 8"L WT: 0.5 lbs UPC: 038987110061

Read more less