Marine Navigation & Instruments

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Garmin units.

Read more less

iSeaSense Wireless Speed Depth Temp Pack Plus WindDigital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity. This pack includes speed, depth, temperature transducer plus wind sensor.Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity, allowing maximum flexibility and connectivity.  Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.Operation:You can access the iSeaSense dashboard through its web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument data. So no complicated programming software or app is required.By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display.  The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.Key Features: Top quality and highly accurate sensors are used for boat depth, speed, wind, compass, and GPS data.  Data can be shared with other devices on the NMEA 2000 network too. iSeaSense is easy to specify. Everything is included as two main starter packs for easy installation and ordering.  No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device. iSeaSense includes the WND100 wind sensor with 20m cable and an interface to “T” directly to the NMEA 2000 backbone.  It means there’s no heavy NMEA 2000 cabling to the top of the mast and no need for complex mast top terminations for the Wind Sensor. iSeaSense also includes depth, speed, and temperature sensors.  A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel. A full NMEA 2000 backbone cabling back the wireless interface for connectivity and a spare cable and connection point for additional NMEA 2000 devices are included. With NMEA 2000, expanding the system is easy and you can add any Digital Yacht’s instruments such as GPS, AIS, electronic compass, and more. You can also send the instrument data to your NMEA 2000 chart plotter or display. iSeaSense features an easy-to-use web interface.  No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready. You can calibrate the wind sensor via the iSeaSense web interface and also displays true and apparent wind speed and angle plus VMG calculations. The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates. The data can also be used by 100 popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc. iSeaSense Pack Features: Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor Pack also includes WND100 mast head wind sensor – adding wind data to the system and network Easy to install mast head unit with 20m cable and NMEA 2000 interface iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location Calibrate the wind sensor via the iSeaSense interface Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays Interface Features: NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server. Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass Network diagnostics, settings, and calibration capability Data logging Self-powered from NMEA 2000 backbone Integrated wifi antenna typically footprints boats up to 20m Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus) Transducer Features: Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second 235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders Max depth 100m Supports up to 22-degree hull deadrise Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone Standard 2” thru hull size/diameter Includes Bluetooth interface for advanced calibration and set-up features if required Stainless steel and bronze skin fittings available as an option Wind Sensor Features: The WND200 package comprises a WND100 mast head unit plus iKonvert NMEA 0183-2000 interface supporting 5Hz fast wind mode 8-18V power with ultra-low 25mA power consumption Supplied with 20m ultra thin 4mm masthead cable for easy cable runs through mast (4 core screened) iKonvert NMEA 2000 interface included for system integration Wind angle accuracy is better than 4 degrees Wind speed accuracy better than 3% Min wind speed 1.7 knots – max 80 knots Settling time typically 1.3 seconds Owner's Manual (pdf)

Read more less

Bronze Low-Profile Thru-Hull Medium-Frequency CHIRP Transducer - 600W, 18° Tilt, 80-130kHzEchonautics presents a range of powerful transducers from Dual Frequency CW to Low/Medium/High CHIRP and digital sensors, with excellent value for money. Technical Specifications: Frequency - 80-130kHz 600W Mounting Style - Thru-Hull Material - Bronze 18° Tilt Specifications: Cable Length (Feet): 26' Chirp: Medium Imagining: Standard Mounting Style: Thru-Hull Pins: 8 Speed Included: No Temperature: Yes Box Dimensions: 5"H x 8"W x 8"L WT: 3.4 lbs UPC: 010407340210 Brochure (pdf)

Read more less

BlueNet™ Network to RJ45 Adapter CableUse this adapter cable to connect your compatible third-party, OneHelm™ digital switching and Fusion® equipment, with an RJ45 port, to the Garmin BlueNet network.

Read more less

52MM (2-1/16") ViewLine Hour Counter-Voltmeter - WhiteVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in the identical color. Interchangeable bezel option.Features: 8 pole Tyco / Hirschmann MQS plug Operating voltage 8 – 48 V Reverse polarity protection Anti-fog double lens Front side protection rating IP67 52 mm installation diameter 50 mm installation depth This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 2-1/16" Gauge Type: Hourmeter Series: ViewLine Voltage - Input Range (Volts): 0-5v Box Dimensions: 3"H x 3"W x 4"L WT: 0.25 lbs UPC: 7640178729285

Read more less

Multi-Vu Revolution Camera SystemAdd real-time video viewing to any RCA-enabled compatible sonar using an Aqua-VU Multi-Vu Revolution Live Underwater Viewing System. Using an Aqua-Vu Multi-Vu Revolution will give you a "live" look underwater in real-time. See what is happening, understand your electronics, and have more fun on the water!Features: Full-color camera with 50 feet of durable cable with depth markings on the cable Patented Revolution™ cable management system for rapid deployment and easy retrieval Custom storage and accessory case Adjustable infrared (IR) lights RCA video out for connectivity with any RCA/BNC video-in-enabled sonar

Read more less

Four Channel Uplink Power Over Ethernet Switch - IEEE802.3af & 3at Compliant - 9-30VDC Input - 48VDC OutputThe new PoE4v2 from Iris Innovations is a four-channel plus uplink power over Ethernet switch that operates over a wide DC input voltage range of 930VDC making it perfect for powering IEEE802.3af/3at devices from battery sources such as boats and vehicles.The PoE4v2 outputs 48 VDC to your PoE device with a power budget of 60W in total and up to 30W per port, providing power to up to 4 devices at 15W each, 2 devices at 30W each, or 1 device at 30W, and further 2 devices at 15W.The unit features a passive uplink port to enable connections to other network switch equipment, routers, or modems.The PoE4v2 simplifies your installation as only a single network cable is required to connect and power your devices, reducing cost and adding convenience.Features: Compact and robust housing Wide input voltage range of 930VDC Perfect for boats and vehicles 60W power budget IEEE802.3af / 3at compliant Up to 30W per channel Plug and play operation - no configuration required 48VDC PoE output voltage to your devices Provides power to devices up to a 100-meter cable length Simplifies installations Specifications: Weight & Dimensions: 0.350 Kg / 115 mm x 32 mm x 95 mm Material: Aluminium, soft anodized PoE Ports / Standard: Ports 14 IEEE802.3af / 802.3at + 1 Uplink Port (non PoE) Total PoE Budget: 60W across 4 PoE Ports Maximum Cable Length: 100 Meters Approvals / Standards CE, UKCA, FCC, IC, REACH, RoHS, WEEE / EN IEC 62368:12020+A11:2020 EN60945:2002 Section 9 & 10 Input Voltage Range: 9 30 VDC Output Voltage: 48 VDC Power Consumption Idle: 0.8W / Max: 2.2W / PoE Max: 106W Environmental: IP30 - Install in a dry dust free environment. Do not expose to moisture. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Surface Mount Bracket for IRISx106 Series Cameras - White Powder Coat FinishThis surface-mount bracket facilitates installation directly onto a bulkhead and is often used when installing in engine rooms where it is not possible to recess-mount the device.Features:White powder coat finish Specifications: Type: Mounting Brackets Box Dimensions: 5"H x 8"W x 8"L WT: 2.9 lbs

Read more less

iSeaSense Wireless Speed Depth Temp PackDigital Yacht iSeaSense is a new range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity – allowing for maximum flexibility and connectivity. Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.Top quality and highly accurate sensors are used for boat depth, speed, compass, and GPS data. Data can be shared with other devices on the NMEA 2000 network too.iSeaSense is easy to specify. Available as two main starter packs, everything is included for easy installation and ordering.  No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.iSeaSense Pack 1 is a comprehensive boat depth, speed, and temperature pack.  A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.A full NMEA 2000 backbone cabling pack is included and the wireless interface for connectivity. There is a spare cable and connection point for additional NMEA 2000 devices such as a multi-function display or Digital Yacht’s range of instruments.iSeaSense features an easy-to-use web interface.  No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.The data can also be used by 100’s popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.OperationYou can access the iSeaSense dashboard through its own web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument's data. So no complicated programming software or app is required.By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display.  The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.iSeaSense Pack Features: Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays Interface Features: NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server. Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass Network diagnostics, settings, and calibration capability Data logging Self-powered from NMEA 2000 backbone Integrated wifi antenna typically footprints boats up to 20m Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus) Transducer Features: Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second 235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders Max depth 100m Supports up to 22-degree hull deadrise Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone Standard 2” thru hull size/diameter Includes Bluetooth interface for advanced calibration and set-up features if required Stainless steel and bronze skin fittings available as an option Brochure (pdf)

Read more less

Miniature Marine PTZ Dome Camera - Stainless Bezel - Hi-Def Ethernet IP - 10x Digital Zoom - 4 in 1 Video FormatThe IRISx106 range of multi-format miniature, controllable cameras are the smallest marine PTZ cameras available on the market and provide fast, smooth variable speed control in a variety of formats to suit your requirements.The IRIS106 features a high-resolution camera sensor that can be switched to output analog (CVBS), AHD, HD-TVI, and HD-CVI video formats depending on your requirement. In analog mode (default) the camera will connect directly to all MFDs that feature a composite video input to provide a crisp, clear video image. Set the camera to HD-TVI and connect via one of our Hybrid recorders or TVIHDMI encoders and you will achieve 1080P High Definition video in real-time compatible with MFDs that feature digital (HDMI / DVI) inputs.The camera can be controlled by our IRIS595 joystick controller, TE01 rotary controller, or via an Iris HVR interface. Data communication to the camera is achieved via a two-wire RS485 serial data connection.The camera housing is designed to be as small as possible, simplifying installation and fitting in discreetly with the boat's aesthetic, unlike other large, unsightly marine PTZ cameras. The body of the camera is made from lightweight but tough ABS plastic, and the dome is cast from smoke acrylic. The camera housing is finished off with a marine-grade stainless steel bezel available in high polish (standard). A surface mount bracket is also available for the camera (Part Number: BRK106), facilitating installation directly onto a bulkhead. This is often used when installing in engine rooms where it is not possible to recess mount the device.Because of its small size and sleek design, the IRIS4106 can be used for deck, companionway, and tender monitoring, engine room monitoring, and as part of your onboard surveillance system. In summary, the 4106 is a very versatile, robust, and controllable marine PTZ camera.Features: Marine Grade 316 Stainless Case The smallest PTZ dome available (86 mm) IP Huge compatibility Easy installation & low power Stylish high-polished finish Fast, responsive pan, tilt, and zoom operation Specifications: Lens (millimeter): F1.8 / F=4.9mm 49mm Image Sensor (inch): 1/4” Omnivision OV9712 Image Processing: H.264 Video Codec, Dual Stream 1-30fps adjustable Effective Pixels: 921,600 Resolution: 1080P/720P Min Illumination: 0.1 Lux (Colour) / 0.01 Lux (B/W) Illumination: NA IR Distance: 10m Day / Night: Auto / Day / Night S/N Ratio: >50dB  Optical Zoom: 10x Digital Zoom: 10x Wide Dynamic Range: Supported BLC: Supported 3D DNR: Supported Mirroring: Horizontal Flip / Vertical Flip AGC: 0-32 Pan Details: 360-degree Continuous Rotation / Speed 0.5300-degree sec Tilt Details: 0 90-degree / Speed 0.5300-degree sec Network: Ethernet RJ45 (10/100 Base-T) Protocol: TCP/UDP/HTTP/MULTICAST/UPnP/NTP/ RTSP/ONVIF-S 2.4 Power over Ethernet: Supported P2P: Supported Smart Phone: Android / iOS Compatibility: PC-Based Systems. For the latest MFD compatibility please contact IRIS Max Users: 32 Users Power: +12VDC / PoE IEEE802.3aF Power Consumption: 1A Max Operating Temperature: -35-degrees C + 60-degrees C Dimensions (millimeter): Bezel OD = 154mm, Panel Cutout = 122mm, Depth Behind Panel = 58mm (For IRIS4106 model additional space should be allowed for RJ45 Connector), Draft = 73mm Ingress Protection: IP66 Weight: 1.1Kg Material: 316L Stainless Steel Bezel, Polycarbonate Dome, ABS Plastic Housing Brochure (pdf)

Read more less

4-In-1 Flush Vertical Surface Mount  - 316L Marine Grade Stainless Steel - Recess Mount DomeIris’ Sx76 series camera is the first of its kind designed to be installed into a bulkhead or vertical surface. Its waterproof stainless steel case is machined from marine-grade 316L stainless steel, which means it will not corrode in harsh saltwater environments, making it a great option as a backup or docking camera for boats. By mounting the camera on the sides of your boat, it can even be used when mooring alongside jetties or pontoons. During installation, the camera’s inner ball can be adjusted and locked into position by tightening the outer bezel to achieve the desired view. For analog or analog hi-def (such as TVI / CVI / AHD) systems, the S076 version features 1080P resolution. The camera also outputs a CVBS signal for legacy composite video systems. As well as marine applications, the camera's tough case, and small footprint make it a perfect visibility aid for recreational vehicles, fire and rescue trucks, and other applications requiring a robust and reliable high-definition camera.The camera is certified to EN60945, EN55032, EN55035, and EN60529 (IP66) and is ONVIF compliant. For marine applications, the camera is directly compatible with Raymarine LH2 and above, Simrad, Lowrance, and B & G. For Garmin systems, use them in conjunction with Iris CMAC systems.Features: 1.8mm standard lens (160-degree horizontal field of view) Corrosion-Proof 316L Marine Grade Stainless Steel Available in 4-in-1 (CVBS, TVI, CVI, AHD) & IP formats Analogue Hi-Def resolutions up to 1920x1080P resolution IP Version - Max 3MP Hi-Def Resolution Super wide angle 160-degree lens IP version supports PoE and 12VDC - ultra-low power Built-in infrared LED illumination (10m range) EN60945, EN55032, EN55035, EN50529 (IP66) , FCC, CE Shock & vibration proof Super rugged and easy to install Applications: Perfect for extreme environments Workboats & tug boats Fishing vessels Engine room monitoring Law enforcement & military Wind farm vessels SUVs, RVs, work vehicles, and trucks Luxury vessels Passenger ferries & cruise liners Specifications: Lens (millimeter): 1.8mm Horizontal Field of View: 160-degree HFOV Sensor (inch): Sensor 1/4” CMOS Sensor Resolution: CVBS: 960H / AHD, HD-TVI. HD-CVI: 1920 x 1080 Interface: OSD Menu via in-line Joystick in Cable Tail Video Processing: Analogue / Analogue HD Protocols/Video Format: 1VPP / 75Ω composite / AHD/TVI/CVI formats Onvif: NA Bitrate: NA Illumination: 6 x 850nm Infra-Red - 10-meter range Lens/Field of View: 1.8mm Standard (160-degree HFOV) Mirroring: Horizontal & vertical configuration via the OSD  Automatic Gain Control: Supported / multiple levels Compatibility: CVBS: All MFDs / Screens featuring composite video input AHD/TVI/CVI via interface or IRIS CMAC System Operating Temperature: -30 + 60-degrees C Connections: Video: Video - 75Ω BNC female / 2.1mm DC socket Material: Marine Grade 316L Stainless Steel (highly polished as a standard) Power: +12VDC (+10 +15VDC range) / 1W Nominal / 1.8W max. (LEDs on) Power Over Ethernet (PoE): NA Weight & Dimensions: 88mm ø x 22.25mm above and below the mounting surface Environmental: EN60529 / IP66 EMC: EN55032:2015/A11:2020 & EN55035:2017/A11:2020 EN60945:2002 Sections 9 & 10 / FCC Part 15 A & B RoHS: EN6300:2018 Brochure (pdf)

Read more less

B952 Class B AIS Transceiver - 5W SOTDMA - WiFi & Bluetooth**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The B952 is a high-power (5W SOTDMA) Class B AIS transceiver, offering unmatched performance and ultra-low power consumption. Small and lightweight, it combines integrated Wi-Fi & Bluetooth capabilities for seamless wireless connectivity and AIS data streaming. It is compatible with any mobile device, PC, or wearable – ensuring everyone on board gets the most from your transceiver and related onboard equipment every day.The B952 transceiver works seamlessly with em-trak's CONNECT-AIS app to make programming, configuration, and device monitoring easier than ever before. The class-leading device is engineered to deliver real-time data processing, with increased range and transmission priority and its flexible connectivity means it can be used by up to nine different devices simultaneously.em-trak's next-gen technology means the B952 is delivered within a compact, easy-to-install, rugged package designed and manufactured to operate reliably without maintenance in the harshest marine environments.Features: Certified AIS Class B – 5W SOTDMA Integrated WiFi & Bluetooth Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smart phone, tablet or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 385kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications:Supply voltage: 12V or 24V DCSupply voltage range: 9.6V - 31.2V DCAverage current (at 12V): 170mAAverage current (at 12V) (wireless off): 135mAPeak current: 2.5AAverage power consumption (at 12V): 2.0WAverage power consumption (at 12V) (wireless off): 1.6WGalvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna portConnectors: VHF antenna: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces:NMEA 0183: 2 x bi-directional portsNMEA 2000: NMEA 2000 Ed 3.101, LEN=1USB: PC virtual com port for NMEA 0183 dataWiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode)Bluetooth: BT Classic 4.0, 7 concurrent connectionsStandards Compliance:AIS standards: IEC 62287-2 Ed. 2, ITU-R M.1371.5Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008Environmental standards: IEC 60945 Ed. 4Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0NMEA 2000: NMEA 2000 Ed 3.101GNSS performance standards: IEC 61108-1 Ed 2.0,  IEC 61108-02 Ed 1.0GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: SOTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 5W (+37dBm) User Interface:Indicators: Power, transmit timeout, error, silent modeIn the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AIS Class: B Antenna Included: Yes Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 6"H x 7"W x 7"L WT: 2 lbs UPC: 672975210557 Quick Guide (pdf)Brochure (pdf)

Read more less