Marine Navigation & Instruments

Marine Network Adapter Cable - Small (Female) to LargeAdapt the small network connector to the larger Garmin Marine Network connector with this cable — which is part of the Panoptix™ LiveScope ice fishing kit.

Read more less

Mercury 15, 20 EFI Remote Throttle/Tiller (2018-Present) & Tohatsu 9.9, 15, 20 EFI Remote Throttle/Tiller (2018+)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Autopilot Pump Type 3 Adjustable Reversing 12V Up to 30CI CylinderFeatures: RELIABLE - Piston pump technology with only three moving parts TWIC THE POWER - Delivers over twice the hydraulic output per watt of input HALF THE POWER CONSUMPTION - Accurate ram positioning means fewer course corrections ADJUSTABLE FLOW RATE - Configure performance to suit your vessel EASY SERVICING - Shut off valves allow removal without draining steering system TWICE THE POWERThe unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.HALF THE POWER CONSUMPTIONGear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps.PINPOINT ACCURACYLeading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation.SAVE ON INSTALLATION COSTSA professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold.ADJUSTABLE FLOW RATEA pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system.Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system. Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 6"W x 12"L WT: 8.75 lbs UPC: 628309272791

Read more less

GT15M-TM Transom Mount Transducer - 8-PinGT15M-TM transducer is perfect for fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation to depth up to 1,900 feet.The 8-pin transducer features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be mounted on the transom.Follow the included installation instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Pins: 8 Mounting Style: Transom Imaging: Standard Chirp: Medium Cable Length (Feet): 20' Box Dimensions: 4"H x 6"W x 7"L WT: 1.4 lbs UPC: 753759174484

Read more less

Transom Mount DownVü 500W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer w/Temp - 4-PinGet ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer.This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and a 0 to 70 transom angle.Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pins: 4 Mounting Style: Transom Imaging: Standard/Down Chirp: Non Traditional Cable Length (Feet): 20' Temperature: Yes Speed Included: No Box Dimensions: 4"H x 7"W x 9"L WT: 1.4 lbs UPC: 753759152758

Read more less

Intelliducer, Thru-Hull, NMEA 200013-24° DeadriseAdd sonar to your boat's marine instrumentation capabilities. This intelligent transducer determines water depth and temperature and sends the data to your NMEA 2000 device. This thru-hull version mounts on a 13-24° deadrise angle. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Speed Included: No Temperature: Yes Mounting Style: Thru-Hull Cable Length (Feet): 18' Box Dimensions: 7"H x 7"W x 7"L WT: 2.5 lbs UPC: 753759076108 Owner's Manual (pdf)

Read more less

Submersible Pressure Transducer - 0-1.5 PSIThe submersible pressure transducers are used together with Maretron's Fluid Pressure Monitor (FPM100), which allows tank fluid level to be broadcast over an NMEA 2000® network where it can be monitored from any compatible NMEA 2000® display. When used together with Maretron displays, alerts can be set to inform the user of low or high tank levels. Users can be notified through emails or text messages about their tank levels when not onboard the vessel. Additionally, the tank levels can be stored using Maretron's data recorder (VDR100) for later analysis.

Read more less

MEGA 360 Hardware Kit for Ultrex QuestThis is a MEGA 360 Imaging transducer mount for Minn Kota Ultrex and Ultrex Quest trolling motors. This mount does not include the MEGA 360 Imaging transducer pod or shaft.Features: Mounting plate for installing a MEGA 360 Imaging transducer on a Minn Kota Ultrex QUEST or Minn Kota Ultrex trolling motor This redesigned mounting plate was made to adapt older MEGA 360 transducers to Minn Kota Ultrex QUEST Models Compatible with the following MEGA 360 Imaging shaft/pod assemblies: MEGA 360 Imaging - No Mount, MEGA 360 Imaging - Universal and MEGA 360 Imaging – Ultrex Specifications: Type: Transducer (trolling motor) Warranty: 1-year limited warranty Specifications: Type: Mounting Brackets Box Dimensions: 7"H x 8"W x 10"L WT: 2.1 lbs UPC: 082324059360

Read more less

Protective Cover for 5" ECHOMAP™ UHD2 ChartplottersGarmin cover to protect your compatible 5" ECHOMAP™ UHD2 from the harsh marine environment when not in use.*Sold as an Individual Specifications: Type: Covers Box Dimensions: 2"H x 6"W x 13"L WT: 0.4 lbs UPC: 753759284725

Read more less

NMEA 2000 T-ConnectorOur NMEA 2000 T-Connector makes it easy to expand your marine electronics network by providing secure connection points between backbone cables and connected devices. Built to NMEA 2000 standards, each NMEA T-connector features rugged, waterproof 5-pin connectors for reliable data transmission in harsh marine environments.These t-connectors give you flexible installation options for both small and complex NMEA 2000 networks. Whether you’re adding a single display, integrating multiple sensors, or connecting additional power feeds, these compact, durable t-connectors help keep wiring organized, improve accessibility, and ensure your network remains dependable and efficient over time. Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Tee Connectors Box Dimensions: 1"H x 4"W x 7"L WT: 0.05 lbs UPC: 810196330344 Brochure (pdf)

Read more less

Full Package - Single Probe with Safety Leader, Probe Charging Station, & Probe Safety LeaderDrawing on years of research and decades of combined experience, the Seeker™ offers anglers a level of data precision, speed, and efficacy that is unrivaled in the fishing industry.Built For The HuntThe Seeker™ represents an advancement in trolling technology, providing anglers with a clear and powerful method for monitoring water conditions, making it easier than ever to gain insight through the use of real-time metrics.Data DeliveryAccurate readings of depth, speed, and temperature to facilitate an informed fishing experience. Display data in metric or imperial.Seeker AppCustom application compatible with most MFDs, as well as mobile devices and tablets running iOS or Android operating systems.Probe ModesQuick data refresh rate—updates every 5 seconds in normal mode or every half-second in thermocline mode.Rapid ChargingOperates on an integrated, fast-charging battery that supplies an impressive 100+ hours of life. Includes a heavy-duty charging station.Build QualityDesigned and manufactured by Airmar in the USA using premium electronics and build materials.ExpandabilityThe Seeker™ ecosystem is engineered with expansion in mind—future releases are already in development. Owner's Manual (pdf)

Read more less

Waterproof USB Cable - 5M (16')USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders5M (16') USB cable with a waterproof connector that twists locks into the USB socket on a Vesper Marine transponder and has a standard PC USB connector for your laptop. Because it locks into place it won't fall out due to vibration or shock.Features: 1 x Waterproof mini connector (IPx7 rated) 1 x Standard USB-A PC connector 5M (16') in length

Read more less